gdtf-spec.md

GDTF Version 1.2 Draft 1

# Introduction

In the lighting and entertainment industry, lighting fixtures
(luminaires and other controllable devices) have become more and more
complex, and the development of these devices happens faster than ever.
New devices are designed with very involved structures; they have
numerous complex color-mixing systems and mode dependencies. To give the
user access to the enormous flexibility of existing devices, a method of
providing accurate fixture type data, and controlling and
pre-visualizing devices quickly and precisely as possible, is needed.
The "General Device Type Format" (GDTF) is that method.

There are many different lighting consoles and software manufacturers on
the market, and all of them use different file formats and methods of
getting the fixture control information into their systems. The
development of new high-end fixtures at an amazing rate creates a lack
of available control data on the side of the console and
pre-visualization software manufacturers. Also, fixture manufacturers
are often approached directly by their clients with requests to support
them with accurate fixture types. As there are so many different
consoles and visualizers on the market, this process requires vast
knowledge of many different systems. Fixture manufacturers would need to
understand how every console or visualizer works, and how to provide the
required data. A format description is needed that not only provides all
of the required control information, but also structures it in a
hierarchical way matching that of the described device.

The lighting designer who would like to use these devices has to deal
with such obstacles. Designers often receive the device control data of
a specific new fixture later than expected. Also, the data may be
incomplete, because it was not created with the latest information from
the fixture manufacturer.

These issues demonstrate that our industry needs a standardized way of
defining the description of intelligent and complex devices. This
document defines such a data format. After the DIN SPEC has been
published, the format will continue to be developed further, but it is
important to make an initial version publicly available. Topics for
which no specifications can be made at this time, but which will soon
become necessary, are therefore already included in this DIN SPEC, but
with a note that no specifications can be made now.


## Scope

This document specifies the “General Device Type Format”(GDTF), a unified way of listing and describing the 
hierarchical and logical structure and controls of any type of controllable device (e.g. luminaires, fog machines, 
etc.) in the lighting and entertainment industry. It will be used as a foundation for the exchange of device data 
between lighting consoles, CAD and 3D-pre-visualization applications. The purpose of an existing GDTF-file is 
to reflect the real-world physical components of the devices and to provide control based on this information. 
It contains and is derived from the 3D geometry (real world or virtual) of the device. 
This document is only applicable for lighting systems and equipment used in the entertainment industry. 	

## Normative references

The following documents are referred to in the text in such a way that
some or all of their content constitutes requirements of this document.
For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies. 

- ANSI E1.54 2015, PLASA Standard for Color Communication in Entertainment
  Lighting 

- ANSI/IES TM-30, IES Method for Evaluating Light Source Color Rendition 

- RFC 4122, A Universally Unique IDentifier (UUID) URN Namespace (available at
  <https://www.ietf.org/rfc/rfc4122.txt>) 

- IEC 61966-2-1:1999, Multimedia systems and equipment - Colour measurement and
  management - Part 2-1: Colour management - Default RGB colour space - sRGB 

- ISO 22028-2:2013, Photography and graphic technology - Extended colour
  encodings for digital image storage, manipulation and interchange - Part 2:
  Reference output medium metric RGB colour image encoding (ROMM RGB)
  
- RFC 4122, A Universally Unique IDentifier (UUID) URN Namespace1

- OpenSoundControl http://opensoundcontrol.org/index.html

- [ANSI E1.20 - 2010 Entertainment Technology—RDM Remote Device Management Over DMX512 Networks](https://tsp.esta.org/tsp/documents/docs/ANSI_E1-20&E1-37-1&E1-37-2.zip)

- [Semantic Versioning 2.0](https://semver.org/)

## Terms and definitions

For the purposes of this document, the following terms and definitions
apply. DIN and DKE maintain terminological databases for use in
standardization at the following addresses:

  - DIN-TERMinologieportal: available at
    <https://www.din.de/go/din-term>
  - DKE-IEV: available at <http://www.dke.de/DKE-IEV>

### General Device Type Format GDTF

descriptive name of the specification

### Fixture Type Attribute

singular mutually exclusive control function 
Note 1 to entry: Definitions of common attributes can be found in Annex A.

### Activation Group

attributes which need to be activated together to gain control over one logical function 
Note 1 to entry: As example Pan & Tilt are paired to gain control over Position.

### Feature

element that’s groups the Fixture Type Attributes into a structured way for easier access and search

### Feature Groups

element that’s groups the Fixture Type Features into a logical way for easier access and search

### DMXBreak

term used when a fixture needs more than one DMX start address

### glTF

file format for three-dimensional scenes and models
Note 1 to entry: glTF is the acronym for Graphics Language Transmission Format.

### glb

selfcontained binary file format of a glTF scene or model.

## File Format Definition

To describe the device type, a zip file with the extension
"*.gdtf" is used. The archive shall contain a description XML file and
resource files. Some of the resource files are located in a folder
structure. There are two folders defined: "./wheels" and "./models". The
folder "./models" has subfolders for a better structural overview:
- ./models/3ds
- ./models/gltf
- ./models/svg

The description.xml file
contains the description of the device type and all DMX modes as well as
all firmware revisions of the device.

```
./description.xml
./thumbnail.png
./thumbnail.svg
./wheels/gobo1.png
./wheels/gobo2.png
./models/3ds/base.3ds
./models/3ds/yoke.3ds
./models/gltf/base.glb
./models/gltf/yoke.glb
./models/3ds_low/base.3ds
./models/3ds_low/yoke.3ds
./models/gltf_low/base.glb
./models/gltf_low/yoke.glb
./models/gltf_high/base.glb
./models/gltf_high/yoke.glb
./models/3ds_high/base.3ds
./models/3ds_high/yoke.3ds
./models/svg/base.svg
./models/svg/yoke.svg
./models/svg_side/base.svg
./models/svg_side/yoke.svg
./models/svg_front/base.svg
./models/svg_front/yoke.svg
./photometric/lamp1.ies
./photometric/lamp1.ldt

```

The ZIP archive name is recommended to be specified as follows:

`<ManufacturerName>@<FixtureTypeName>@<OptionalComment>`

Example: `generic@led@comment`

It is recommended to limit the filename to the POSIX "Fully Portable Filenames"
character set: [A-Z], [a-z], [0-9], the symbols '_' (U+005F), '-' (U+002D) and
a maximum of one '.' (U+002E), if needed, use '_' (U+005F) or '-' (U+002D) to
replace unsupported characters.


UTF-8 has to be used to encode the XML file. Each XML file internally
consists of XML nodes. Each XML node could have XML attributes and XML
children. Each XML attribute has a value. If a XML attribute is not
specified, the default value of this XML attribute will be used. If the
XML attribute value is specified as a string, the format of the string
will depend on the XML attribute type. All XML attribute types are
specified in [Table 1](#user-content-table-1 ).


<div id="table-1">

##### Table 1 — *XML Attribute Value Types*

| Value Type                            | Format                | Description           |
|----|----|----|
|Uint<a id="attrtype-uint" />                       | Integer               | Unsigned integer|
|Int<a id="attrtype-int" />                         | Integer               | Signed integer|
|Hex<a id="attrtype-hex" />                         | Integer               | Number in hexadecimal  notation; Default value: 0|
|Float<a id="user-content-attrtype-float" />        | float                 | Floating point numeric; Separator: "."|
|String<a id="attrtype-string" />                   | Literal               | Text|
|Name<a id="attrtype-name" />                       | restricted Literal    | Unique object names; The allowed characters are listed in [AnnexC](#user-content-table-c1) Default value: object type with an index in parent.|
|Date<a id="attrtype-date" />                       | yyyy-mm-ddThh:mm:ss   |  Date and time corresponding to UTC +00:00 (Coordinated Universal Time): yyyy – year, mm – month, dd – day, hh – hours (24 format), mm – minutes, ss – seconds. Example: “2016-06-21T11:22:48” |
|Node<a id="attrtype-node" />                       | Name.Name.Name...     | Link to an element: “Name” is the value of the attribute “Name” of a defined XML node. The starting point defines each attribute separately. |
|ColorCIE<a id="attrtype-colorcie" />               | floatx, floaty,floatY       | CIE color representation xyY 1931|
|Vector3<a id="attrtype-vector3" />                 |  {float,float,float} | Vector with 3 float components|
|Matrix<a id="attrtype-matrix" />                   |  {float,float,float,float} <br/>{float,float,float,float} <br/>{float,float,float,float} <br/>{float,float,float,float} |  The transformation matrix consists 4 x 4 floats. Stored in a row-major order. For example, each row of the matrix is stored as a 4- component vector. The mathematical definition of the matrix is in a column-major order. For example, the matrix rotation is stored in the first three columns, and the translation is stored in the 4th column. The metric system consists of the Right- handed Cartesian Coordinates XYZ:<br/>X – from left (-X) to right (+X),<br/>Y – from the outside of the monitor (-Y) to the inside of the monitor (+Y),<br/>Z – from bottom (-Z) to top (+Z). 0,0,0 – center base. |
|Rotation<a id="attrtype-rotation"/>                | {float, float, float}<br/>{float, float, float} <br/>{float, float, float} | Rotation matrix, consist of 3\*3 floats. Stored as row-major matrix, i.e. each row of the matrix is stored as a 3-component vector. Mathematical definition of the matrix is column-major, i.e. the matrix rotation is stored in the three columns. Metric system, right-handed Cartesian coordinates XYZ:<br/>X – from left (-X) to right (+X),<br/>Y – from the outside of the monitor (-Y) to the inside of the monitor (+Y),<br/>Z – from the bottom (-Z) to the top (+Z). |
|Enum<a id="attrtype-enum"/>                        | Literal               | Possible values are predefined.|
|DMXAddress<a id="attrtype-dmxaddress"/>            |Int, Alternative format: Universe.Address | Absolute DMX address (size 4 bytes); Alternative format: Universe – integer universe number, starting with 1; Address: address within universe from 1 to 512. Format: integer |
|DMXValue<a id="attrtype-dmxvalue"/>                | Uint/n for ByteMirroring values <br/>Uint/ns for ByteShifting values|Special type to define DMX value where n is the byte count and the Uint is the value. The value must be within the size limit defined by the byte count. The byte count can be individually specified without depending on the resolution of the DMX Channel.<br/> By default byte mirroring is used for the conversion. See examples below. Byte shifting and mirroring will be obsoleted in next version of the Spec and the DMXValue will have to be specified including and matching the resolution of the DMX Channel|
|GUID<a id="attrtype-guid"/>                        | XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX | Unique ID corresponding to RFC 4122: X–1 digit in hexadecimal notation. Example: “308EA87D-7164-42DE-8106-A6D273F57A51”. |
|Resource<a id="attrtype-resource"/>                | String|File name of the resource file without extension and without subfolder. |
|Pixel<a id="attrtype-pixel"/>                      | Pixel| 	Integer value representing one Pixel inside a MediaFile. Pixel count starts with zero in the top left corner.| 

Examples for DMXValue:

Byte mirroring: 255/1 definition in a 16 bit channel will result in 255/255 in two component notation and in 65535 integer.

Byte shifting: 255/1s definition in a 16 bit channel will result in 255/0 in two component notation and in 65280 integer.


The first XML node is always the XML description node: `<?xml version="1.0" encoding="UTF-8"?>`

The second XML node is the GDTF node. The attribute of this node is the
DataVersion: `<GDTF DataVersion="1.2">`

The example above shows the XML node for GDTF version 1.2.

From GDTF Spec version 2.0, GDTF Spec uses Semantic Versioning 2.0, where given
a version number MAJOR.MINOR, the numbers mean:

- MAJOR version for incompatible API changes
- MINOR version for added functionality in a backward compatible manner

<div id="table-2">

#### Table 2. *GDTF Node Attributes*

| XML Attribute Name | Value Type                             | Description                                                                                                                                                 |
|----|----|----|
| DataVersion        | [UInt.UInt](#user-content-attrtype-uint )| The DataVersion attribute defines the minimal version of compatibility. The Version format is “Major.Minor”, where major and minor is Uint with size 1 byte. |


</div>

## Fixture Type Node

The FixtureType node is the starting point of the description of the
fixture type within the XML file. The defined Fixture Type Node
attributes of the fixture type are specified in [table 3](#user-content-table-3 ).


<div id="table-3">

#### Table 3. *Fixture Type Node Attributes*

| XML Attribute Name | Value Type | Description  |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | Name of the fixture type.|
| ShortName          | [String](#user-content-attrtype-string )     | Shortened name of the fixture type. Non detailed version or an abbreviation. Can use any characters or symbols. Used in user interfaces in places where there is not enough space.|
| LongName           | [String](#user-content-attrtype-string )     | Detailed, complete name of the fixture type, can include any characters or extra symbols.|
| Manufacturer       | [String](#user-content-attrtype-string )     | Manufacturer of the fixture type.|
| Description        | [String](#user-content-attrtype-string )     | Description of the fixture type. |
| FixtureTypeID      | [GUID](#user-content-attrtype-guid )         | Unique number of the fixture type. |
| Thumbnail          | [Resource](#user-content-attrtype-resource ) | Optional. File name without extension containing description of the thumbnail. Use the following as a resource file: <br />- png file to provide the rasterized picture. Maximum resolution of picture: 1024x1024 <br />- svg file to provide the vector graphic as viewed from bottom in Z direction.  <br />- These resource files are located in the root directory of the zip file.  |
| ThumbnailOffsetX   | [Int](#user-content-attrtype-int )           | Horizontal offset in pixels from the top left of the viewbox to the insertion point on a label. Default value: 0 |
| ThumbnailOffsetY   | [Int](#user-content-attrtype-int )           | Vertical offset in pixels from the top left of the viewbox to the insertion point on a label. Default value: 0 |
| RefFT              | [GUID](#user-content-attrtype-guid )         | Optional. GUID of the referenced fixture type. |
| CanHaveChildren    | [Enum](#user-content-attrtype-enum )         | Describes if it is possible to mount other devices to this device. Value: “Yes”, “No”. Default value: “Yes” |

</div>


Fixture type node children are specified in [table 4](#user-content-table-4 ).

For SVG files defining the `Thumbnail` view must be the view from bottom in Z direction. You can mark the elements in the `Thumbnail` defining Movement Range and the Connection Input position. 
* Movement Range: shapes inside the SVG with fill and stroke color Red (#FF0000(RGB: 255, 0, 0)) and with fill and stroke opacity 0, allow software to identify these shapes as a movement range of the device.
* Connection Input (Pigtail): shapes inside the SVG with fill and stroke color Green (#00FF00 (RGB: 0, 255, 0)) and with fill and stroke opacity 0, allow software to identify these shapes as a connection input (pigtail) part of the device.



<div id="table-4">

#### Table 4. *Fixture Type Node Children*

| Child Node                                                | Mandatory | Description                                                                                 |
|----|----|----|
| [AttributeDefinitions](#user-content-attribute-definitions ) | Yes       | Defines all Fixture Type Attributes that are used in the fixture type.                      |
| [Wheels](#user-content-wheel-collect )                       | No        | Defines the physical or virtual color wheels, gobo wheels, media server content and others. |
| [PhysicalDescriptions](#user-content-physical-descriptions ) | No        | Contains additional physical descriptions.                                                  |
| [Models](#user-content-model-collect )                       | No        | Contains models of physically separated parts of the device.                                |
| [Geometries](#user-content-geometry-collect )                | Yes       | Describes physically separated parts of the device.                                         |
| [DMXModes](#user-content-dmx-mode-collect )                  | Yes       | Contains descriptions of the DMX modes.                                                     |
| [Revisions](#user-content-revision-collect )                 | No        | Describes the history of the fixture type.                                                  |
| [FTPresets](#user-content-fixture-type-preset-collect )              | No        | Is used to transfer user-defined and fixture type specific presets to other show files.     |
| [Protocols](#user-content-fixture-type-preset-collect)                        | No        | Is used to specify supported protocols.                                                     |


</div>

One or more sections could be empty or missing, but the order of
sections is mandatory as specified in [table 4](#user-content-table-4 ).

## Attribute Definitions

### General

This section defines the attribute definitions for the Fixture Type
Attributes.

Note 1: More information on the definitions of attributes can be found in Annex
A "Attribute Definitions"". 

Note 2: All currently defined Fixture Type Attributes can be found in Annex B
"Attribute Listing".

Note 3: All currently defined activation groups can be found in Annex B
"Attribute Listing". 

Note 4: All currently defined feature groups can be found in Annex B "Attribute
Listing".

The current attribute definition node does not have any XML attributes
(XML node `<AttributeDefinitions>`). Children of the attribute definition
are specified in [table 5](#user-content-table-5 ).

<div id="table-5">

#### Table 5. *Attribute Definition Children*

| XML node     | Mandatory | Description     |
|----|----|----|
| [ActivationGroups](#user-content-activation-group) | No        | Defines which attributes are to be activated together. For example, Pan and Tilt are in the same activation group.                      |
| [FeatureGroups](#user-content-feature-group)       | Yes       | Describes the logical grouping of attributes. For example, Gobo 1 and Gobo 2 are grouped in the feature Gobo of the feature group Gobo. |
| [Attributes](#user-content-attribute)              | Yes       | List of Fixture Type Attributes that are used. Predefindes fixtury type attributes can be found in Annex A.                             |

</div>


### Activation Groups
  
#### General

This section defines groups of Fixture Type Attributes that are intended
to be used together.

Example: Usually Pan and Tilt are Fixture Type Attributes that shall be
activated together to be able to store and recreate any position.

The current activation groups node does not have any XML attributes (XML
node `<ActivationGroups>`). As children it can have a list of a
[activation group](#user-content-activation-group ).

#### Activation Group

This section defines the activation group Attributes (XML node
`<ActivationGroup`>). Currently defined XML attributes of the activation
group are specified in [table 6](#user-content-table-6 ).

<div id="table-6">

#### Table 6. *Activation Group Attributes*

| XML Attribute Name | Value Type                        | Description                              |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name ) | The unique name of the activation group. |


</div>

The activation group does not have any children.

### Feature Groups
  
#### General

This section defines the logical grouping of Fixture Type Attributes
(XML node `<FeatureGroups>`).

Note 1: A feature group can contain more than one logical control unit. A
feature group Position shall contain PanTilt and XYZ as separate Feature. 

Note 2: Usually Pan and Tilt create a logical unit to enable position control,
so they must be grouped in a Feature PanTilt.

As children the feature groups has a list of a [feature group](#user-content-feature-group ).

#### Feature Group
  
##### General

This section defines the feature group (XML node `<FeatureGroup>`). The
currently defined XML attributes of the feature group are specified in
[table 7](#user-content-table-7 ).

<div id="table-7">

#### Table 7. *Feature Group Attributes*

| XML Attribute Name | Value Type                            | Description                           |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the feature group. |
| Pretty             | [String](#user-content-attrtype-string ) | The pretty name of the feature group. |


</div>

As children the feature group has a list of a
[feature](#user-content-feature ).

##### Feature

This section defines the feature (XML node `<Feature>`). The currently
defined XML attributes of the feature are specified in [table
8](#user-content-table-8 ).

<div id="table-8">

#### Table 8. *Feature Attributes*

| XML Attribute Name | Value Type                        | Description                     |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name ) | The unique name of the feature. |


</div>

The feature does not have any children.

### Attributes

#### General

This section defines the Fixture Type Attributes (XML node
`<Attributes>`). As children the attributes node has a list of a
[attributes](#user-content-attribute ).

#### Attribute

This section defines the Fixture Type Attribute (XML node `<Attribute>`).
The currently defined XML attributes of the attribute Node are specified
in [table 9](#user-content-table-9 ).

<div id="table-9">

#### Table 9. *XML Attributes of the Attribute*

| XML Attribute Name | Value Type | Description |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | The unique name of the attribute.                                                                                                                                                                                                                                                                                                                                                                                                    |
| Label              | [String](#user-content-attrtype-string )     | Name of the attribute for the user.                                                                                                                                                                                                                                                                                                                                          |
| Pretty             | [String](#user-content-attrtype-string )     | The short name of the attribute .                                                                                                                                                                                                                                                                                                                                                                                                   |
| ActivationGroup    | [Node](#user-content-attrtype-node )         | Optional link to the activation group. The starting point is the [activation groups](#user-content-activation-groups ) node.                                                                                                                                                                                                                                                                                                            |
| Feature            | [Node](#user-content-attrtype-node )         | Link to the corresponding feature. The starting point is the [feature groups](#user-content-feature-groups ) node.                                                                                                                                                                                                                                                                                                                      |
| MainAttribute      | [Node](#user-content-attrtype-node )         | Optional link to the main attribute. The starting point is the [attribute](#user-content-attribute ) node.                                                                                                                                                                                                                                                                                                                              |
| PhysicalUnit       | [Enum](#user-content-attrtype-enum )         | The currently defined unit values are: “None”, “Percent”, “Length” (m), “Mass” (kg), “Time” (s), “Temperature” (K), “LuminousIntensity”(cd), “Angle” (degree), “Force” (N), “Frequency” (Hz), “Current” (A), “Voltage” (V), “Power” (W), “Energy” (J), “Area” (m2), “Volume” (m3), “Speed” (m/s), “Acceleration” (m/s2), “AngularSpeed” (degree/s), “AngularAccc” (degree/s2), “WaveLength” (nm), “ColorComponent”. Default: “None”. |
| Color              | [ColorCIE](#user-content-attrtype-colorcie ) | Optional. Defines the color for the attribute.                                                                                                                                                                                                                                                                                                                                                                                       |
| Definition         | [String](#user-content-attrtype-string )     | Description of what the attribute defines.                                                                                                                                                                                                                                                                                                                                                                                                    |
| Explanation        | [String](#user-content-attrtype-string )     | Longer form explanation of what the attribute defines with focus on the user.                                                                                                                                                                                                                                                                                                                                          |
| UseEmitter         | [Enum](#user-content-attrtype-enum )         | Indication whether this attribute typically utilizes [Emitters](#user-content-emitter-collect ). The currently defined values are: "True", "False" |
| UseFilter          | [Enum](#user-content-attrtype-enum )         | Indication whether this attribute typically utilizes [Filters](#user-content-filter-collect ). The currently defined values are: "True", "False" |
| UseWheel           | [Enum](#user-content-attrtype-enum )         | Indication whether this attribute typically utilizes [Wheels](#user-content-wheel-collect ). The currently defined values are: "True", "False" |
| UseWheelSlot       | [Enum](#user-content-attrtype-enum )         | Indication whether this attribute typically utilizes [WheelSlots](#user-content-wheel-slot ). The currently defined values are: "True", "False" |
| UseGamut           | [Enum](#user-content-attrtype-enum )         | Indication whether this attribute typically utilizes [Gamuts](#user-content-gamuts ). The currently defined values are: "True", "False" |
| UseColorSpace      | [Enum](#user-content-attrtype-enum )         | Indication whether this attribute typically utilizes [ColorSpaces](#user-content-color-space ). The currently defined values are: "True", "False" |

</div>

As children the attribute node has a list of a [subphysical units](#user-content-subphysical-unit ).

##### Subphysical Unit

This section defines the Attribute Subphysical Unit (XML node `<SubPhysicalUnit>`).
The currently defined XML attributes of the subphysical unit are specified in [table 10](#user-content-table-10 ).

<div id="table-10">

#### Table 10. *XML Attributes of the Subphysical Unit*

| XML Attribute Name | Value Type                                | Description                                                                                             |
|----|----|----|
| Type               | [Enum](#user-content-attrtype-enum )      | The currently defined values are: "PlacementOffset", "Amplitude", "AmplitudeMin", "AmplitudeMax", "Duration", "DutyCycle",  "TimeOffset", "MinimumOpening", "Value", "RatioHorizontal", "RatioVertical".  |
| PhysicalUnit       | [Enum](#user-content-attrtype-enum )      | The currently defined unit values are: “None”, “Percent”, “Length” (m), “Mass” (kg), “Time” (s), “Temperature” (K), “LuminousIntensity”(cd), “Angle” (degree), “Force” (N), “Frequency” (Hz), “Current” (A), “Voltage” (V), “Power” (W), “Energy” (J), “Area” (m2), “Volume” (m3), “Speed” (m/s), “Acceleration” (m/s2), “AngularSpeed” (degree/s), “AngularAccc” (degree/s2), “WaveLength” (nm), “ColorComponent”. Default: “None”. |
| PhysicalFrom       | [Float](#user-content-attrtype-float )    | The default physical from of the subphysical unit; Unit: as defined in PhysicalUnit; Default value: 0   |
| PhysicalTo         | [Float](#user-content-attrtype-float )    | The default physical to of the subphysical unit; Unit: as defined in PhysicalUnit; Default value: 1     |


</div>

The subphysical unit does not have any children.

## Wheel Collect
  
### General

This section defines all physical or virtual wheels of the device. It
currently does not have any XML attributes (XML node `<Wheels>`). As
children wheel collect can have a list of a [wheels](#user-content-wheel ).

Note 1: Physical or virtual wheels represent the changes to the light beam
within the device. Typically color, gobo, prism, animation, content and others
are described by wheels.

### Wheel
  
#### General

Each wheel describes a single physical or virtual wheel of the fixture
type. If the real device has wheels you can change, then all wheel
configurations have to be described. Wheel has the following XML node:
`<Wheel>`. The currently defined XML attributes of the wheel are specified
in [table 11](#user-content-table-11 ).

<div id="table-11">

#### Table 11. *Wheel Attributes*

| XML Attribute Name | Value Type                        | Description                  |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name ) | The unique name of the wheel |


</div>

As children, Wheel has a list of [wheel
slots](#user-content-wheel-slot ).

#### Wheel Slot
  
##### General

The wheel slot represents a slot on the wheel (XML node `<Slot>`). The
currently defined XML attributes of the wheel slot are specified in
[table 12](#user-content-table-12 ).

<div id="table-12">

#### Table 12. *Wheel Slot Attributes*

| XML Attribute Name | Value Type | Description                                                                                                                                                                                                                                                                                                                       |
|----|----|----|
| Name               | [String](#user-content-attrtype-string )        | The name of the wheel slot                                                                                                                                                                                                                                                                                                 |
| Color              | [ColorCIE](#user-content-attrtype-colorcie )   | Color of the wheel slot, Default value: {0.3127, 0.3290, 100.0 } (white) For Y give relative value compared to overall output defined in property Luminous Flux of related Beam Geometry (transmissive case).                                                                                                                     |
| Filter             | [Node](#user-content-attrtype-node )       | Optional. Link to filter in the physical description, Starting point: Filter Collect                                                                                                                                                                                                       |
| MediaFileName | [Resource](#user-content-attrtype-resource ) | Optional. PNG file name without extension containing image for specific gobos etc. <br />- Maximum resolution of picture: 1024x1024<br />- Recommended resolution of gobo: 256x256<br />- Recommended resolution of animation wheel: 256x256<br />These resource files are located in a folder called `./wheels` in the zip archive. Default value: empty. |
| BeamInfluence      | [Enum](#user-content-attrtype-enum )   | Optional. Describes how the slot is affecting the beam. Currently defined values are "Open" - the slot is not affecting the beam, "Closed" - the slot is completely blocking the beam.|
</div>

As children the attribute node can have a list of [Prism
Facet](#user-content-prism-facet) or [Animation
System](#user-content-animation-system).

Note 1: More information on the definitions of images used in wheel slots to
visualize gobos, animation wheels or color wheels can be found in Annex E
"Wheel Slot Image Definition".

The link between a slot and a [channel set](#user-content-channel-set ) is
done via the wheel slot index. The wheel slot index of a slot is derived
from the order of a wheel's slots. The wheel slot index is normalized to
1.

If the wheel slot describes a prism, it has to have one or several children
called [Prism Facet](#user-content-prism-facet ). If the wheel slot describes
an AnimationSystem it has to have one child called
[AnimationSystem](#user-content-animation-system).

The [attribute](#annex-a-normative-attribute-definitions) of a parent channel
function in the linked channel set defines which XML attributes of a wheel slot
should be used and in what order of importance:

| GDTF Attribute Name | Utilized XML attribute                                      |
|----|----|
| Color(n)              | MediaFileName, Filter, Color                              |
| Gobo(n)               | MediaFileName                                             |
| Prism(n)              | Facet                                                     |
| AnimationWheel(n)     | MediaFileName                                             |
| AnimationSystem(n)    | MediaFileName + AnimationSystem                           |
| MediaContent(n)       | MediaFileName                                             |


##### Prism Facet

This section can only be defined for the prism wheel slot and has a
description for the prism facet (XML node `<Facet>`). The currently
defined XML attributes of the prism facet are specified in [table
13](#user-content-table-13 ).

<div id="table-13">

#### Table 13. *Wheel Slot Attributes*

| XML Attribute Name | Value Type                                | Description                                                           |
|----|----|----|
| Color              | [ColorCIE](#user-content-attrtype-colorcie ) | Color of prism facet, Default value: {0.3127, 0.3290, 100.0 } (white) |
| Rotation           | [Rotation](#user-content-attrtype-rotation ) | Specify the rotation, translation and scaling for the facet.          |


</div>

The prism facet cannot have any children.


##### Animation System

This section can only be defined for the animation system disk and it
describes the animation system behavior (XML node `<AnimationSystem>`).
The currently defined XML attributes of the AnimationSystem are
specified in [table 14](#user-content-table-14 ).

<div id="table-14">

#### Table 14. *AnimationSystem Attributes*

| XML Attribute Name | Value Type                                   | Description                                                                                                                                                                                                              |
|----|----|----|
| P1                 | [Array of Float](#user-content-attrtype-float ) | First Point of the Spline describing the path of animation system in the beam in relation to the middle of the Media File; Array of two floats; Separator of values is ","; First Float is X-axis and second is Y-axis.  |
| P2                 | [Array of Float](#user-content-attrtype-float ) | Second Point of the Spline describing the path of animation system in the beam in relation to the middle of the Media File; Array of two floats; Separator of values is ","; First Float is X-axis and second is Y-axis. |
| P3                 | [Array of Float](#user-content-attrtype-float ) | Third Point of the Spline describing the path of animation system in the beam in relation to the middle of the Media File; Array of two floats; Separator of values is ","; First Float is X-axis and second is Y-axis.  |
| Radius             | [Float](#user-content-attrtype-float )          | Radius of the circle that defines the section of the animation system which will be shown in the beam                                                                                                                    |


</div>

The AnimationSystem cannot have any children.

![media/animation\_wheel\_example.png](media/animation_wheel_example.png
"media/animation_wheel_example.png") Example of an animation
system


## Physical Descriptions
  
### General

This section describes the physical constitution of the device. It
currently does not have any XML Attributes (XML node
`<PhysicalDescriptions>`). Children of Physical Description are specified
in [table 15](#user-content-table-15 ).

<div id="table-15">

#### Table 15. *Physical Description Children*

| XML node                               | Mandatory | Description                                                                         |
|----|----|----|
| [Emitters](#user-content-emitter-collect )       | No        | Describes device emitters                                                           |
| [Filters](#user-content-filter-collect )         | No        | Describes device filters                                                            |
| [ColorSpace](#user-content-color-space )   | No        | This section defined the device default color space and is kept for backwards compatibility. From DIN SPEC 15800:TODO or GDTF v1.3 onwards all color spaces of a device shall be decribed in the Color Space Collect (XMLnode <AdditionalColorSpaces>)                                                       |
| [AdditionalColorSpaces](#user-content-color-spaces )   | No        | Describes device color spaces                                                        |
| [Gamuts](#user-content-gamuts )   | No        | Describes device gamuts                                                        |
| [DMXProfiles](#user-content-dmx-profile-collect) | No        | Describes nonlinear correlation between DMX input and physical output of a channel. |
| [CRIs](#user-content-color-rendering-index-collect)               | No        | Describes color rendering with IES TM-30-15 (99 color samples).                     |
| [Properties](#user-content-properties-collect )   | No        | Describes physical properties of the device.                                        |


</div>

### Emitter Collect
  
#### General

This section contains the description of the emitters. Emitter Collect
defines additive mixing of light sources, such as LEDs and tungsten
lamps with permanently fitted filters. It currently does not have any
XML Attributes (XML node `<Emitters>`). As children the emitter collect
has a list of a [emitter](#user-content-emitter ).

#### Emitter

This section defines the description of the emitter (XML node
<Emitter>). The currently defined XML attributes of the emitter are
specified in [table 16](#user-content-table-16 ).

<div id="table-16">

#### Table 16. *Emitter Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                                                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | Unique Name of the emitter                                                                                                                                                                                                    |
| Color              | [ColorCIE](#user-content-attrtype-colorcie ) | Approximate absolute color point if applicable. Omit for non-visible emitters (eg., UV). For Y give relative value compared to overall output defined in property Luminous Flux of related Beam Geometry (transmissive case). |
| DominantWaveLength | [Float](#user-content-attrtype-float )       | Required if color is omitted, otherwise it is optional. Dominant wavelength of the LED.                                                                                                                                       |
| DiodePart          | [String](#user-content-attrtype-string )     | Optional. Manufacturer’s part number of the diode.                                                                                                                                                                            |


</div>

As children, the Emitter has a list of
[measurements](#user-content-measurement ).

### Filter Collect
  
#### General

This section contains the description of the filters. The Filter Collect
defines subtractive mixing of light sources by filters, such as
subtractive mixing flags and media used in physical or virtual Color
Wheels. It currently does not have any XML Attributes (XML node
`<Filters>`). As children the filter collect has a list of a
[filters](#user-content-filter ).

#### Filter

This section defines the description of the filter (XML node `<Filter>`).
The currently defined XML attributes of the filter are specified in
[table 17](#user-content-table-17 ).

<div id="table-17">

#### Table 17. *Filter Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                                                                                                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | Unique Name of the filter.                                                                                                                                                                                                                                                    |
| Color              | [ColorCIE](#user-content-attrtype-colorcie ) | Approximate absolute color point when this filter is the only item fully inserted into the beam and the fixture is at maximum intensity. For Y give relative value compared to overall output defined in property Luminous Flux of related Beam Geometry (transmissive case). |


</div>

As children the Filter has a list of
[measurements](#user-content-measurement ).

### Measurement
  
#### General

The measurement defines the relation between the requested output by a
control channel and the physically achieved intensity. XML node for
measurement is `<Measurement>`. The currently defined XML attributes of
the measurement are specified in [table 18](#user-content-table-18 ).

<div id="table-18">

#### Table 18. *Measurement Attributes*

| XML Attribute Name | Value Type                          | Description                                                                                                                                                                                                                  |
|----|----|----|
| Physical           | [Float](#user-content-attrtype-float ) | For additive color mixing: uniquely given emitter intensity DMX percentage. Value range between \> 0 and \<= 100. For subtractive color mixing: uniquely given flag insertion DMX percentage. Value range between 0 and 100. |
| LuminousIntensity  | [Float](#user-content-attrtype-float ) | Used for additive color mixing: overall candela value for the enclosed set of measurement.                                                                                                                                   |
| Transmission       | [Float](#user-content-attrtype-float ) | Used for subtractive color mixing: total amount of lighting energy passed at this insertion percentage.                                                                                                                      |
| InterpolationTo    | [Enum](#user-content-attrtype-enum )   | Interpolation scheme from the previous value. The currently defined values are: "Linear", "Step", "Log"; Default: Linear                                                                                                     |


</div>

The order of the measurements corresponds to their ascending physical
values.

Additional definition for additive color mixing: It is assumed that the
physical value 0 exists and has zero output.

Additional definition for subtractive color mixing: The flag is removed
with physical value 0 and it does not affect the beam. Physical value
100 is maximally inserted and affects the beam.

Note 1: Some fixtures may vary in color response. These fixtures define
multiple measurement points and corresponding interpolations.

As children the Measurement Collect has an optional list of a
[measurement point](#user-content-measurement-point ).

#### Measurement Point

The measurement point defines the energy of a specific wavelength of a
spectrum. The XML node for measurement point is `<MeasurementPoint>`. The
defined XML attributes of the measurement points are specified in [table 
19](#user-content-table-19 ).

It is recommended, but not required, that measurement points are evenly
spaced. Regions with minimal light energy can be omitted, but the
decisive range of spectrum must be included. Recommended measurement
spacing is 1 nm. Measurement spacing should not exceed 4 nm.

<div id="table-19">

#### Table 19. *Measurement Point Attributes*

| XML Attribute Name | Value Type                          | Description                            |
|----|----|----|
| WaveLength         | [Float](#user-content-attrtype-float ) | Center wavelength of measurement (nm). |
| Energy             | [Float](#user-content-attrtype-float ) | Lighting energy (W/m2/nm)              |


</div>

The measurement point does not have any children.

### Color Space Collect
  
#### General

This section defines color spaces. Currently it does not
have any XML attributes (XML node `<AdditionalColorSpaces>`). As children, color space collect has a list of a [ColorSpace](#user-content-color-space ).

#### Color Space

This section defines the color space that is used for color mixing with
indirect RGB, Hue/Sat, xyY or CMY control input. (XML node
`<ColorSpace>`). The currently defined XML attributes of the color space
are specified in [table 20](#user-content-table-20 ).

<div id="table-20">

#### Table 20. *Color Space Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                      |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | Unique Name of the Color Space. Default Value: "Default". Note that the name need to be unique for the default colorspace and all color spaces in the AdditionalColorSpaces node. |                                                                                                                            |
| Mode               | [Enum](#user-content-attrtype-enum )         | Definition of the Color Space that used for the indirect color mixing. The defined values are "Custom", "sRGB", "ProPhoto" and "ANSI". Default Value: "sRGB"  |
| Red                | [ColorCIE](#user-content-attrtype-colorcie ) | Optional. CIE xyY of the Red Primary; this is used only if the ColorSpace is "Custom".                                                                        |
| Green              | [ColorCIE](#user-content-attrtype-colorcie ) | Optional. CIE xyY of the Green Primary; this is used only if the ColorSpace is "Custom".                                                                      |
| Blue               | [ColorCIE](#user-content-attrtype-colorcie ) | Optional. CIE xyY of the Blue Primary; this is used only if the ColorSpace is "Custom".                                                                       |
| WhitePoint         | [ColorCIE](#user-content-attrtype-colorcie ) | Optional. CIE xyY of the White Point; this is used only if the ColorSpace is "Custom".                                                                        |


</div>

The predefined modes for the color space XML Attributes are are
specified in [table 21](#user-content-table-21 ).

<div id="table-21">

#### Table 21. *Predefined Modes for Color Space Attribute Mode*

|             |                                     |                                          |                 |
|----|----|----|----|
| Mode        | sRGB                                | ProPhoto                                 | ANSI            |
| Description | Adobe sRGB, HDTV IEC 61966-2-1:1999 | Kodak ProPhoto ROMM RGB ISO 22028-2:2013 | ANSI E1.54-2015 |
| Red         | 0.6400, 0.3300, 0.2126              | 0.7347, 0.2653                           | 0.7347, 0.2653  |
| Green       | 0.3000, 0.6000, 0.7152              | 0.1596, 0.8404                           | 0.1596, 0.8404  |
| Blue        | 0.1500, 0.0600, 0.0722              | 0.0366, 0.0001                           | 0.0366, 0.001   |
| WhitePoint  | 0.3127, 0.3290, 1.0000              | 0.3457, 0.3585                           | 0.4254, 0.4044  |


</div>

The color space does not have any children.

### Gamut Collect
  
#### General

This section defines gamuts. Currently it does not
have any XML attributes (XML node `<Gamuts>`). As children, gamut collect has a list of a [Gamut](#user-content-gamut ).

#### Gamut

This section defines the color gamut of the fixture (XML node `<Gamut>`), which is the set of attainable colors by the fixture. The currently defined XML attributes of a gamut
are specified in [table 22](#user-content-table-22 ).

<div id="table-22">

#### Table 22. *Gamut Attributes*

| XML Attribute Name | Value Type                                             | Description                                                 |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )                   | Unique Name of the Gamut.                                   |
| Points             | [Array of ColorCIE](#user-content-attrtype-colorcie )  | Set of points defining the vertice of the gamut's polygon.  |


</div>

The gamut does not have any children.

### DMX Profile Collect
  
#### General

This section defines DMX profile descriptions. Currently it does not
have any XML attributes (XML node `<DMXProfiles>`). As children DMX
profile collect has a list of [DMX profiles](#user-content-dmx-profile ).

#### DMX Profile

This section defines the DMX profile description (XML node
`<DMXProfile>`). The currently defined XML attributes of the DMX profile
are specified in [table 23](#user-content-table-23 ).

<div id="table-23">

#### Table 23. *DMX Profile Attributes*

| XML Attribute Name  | Value Type                           | Description                    |
|----|----|----|
| Name                | [Name](#user-content-attrtype-name ) | Unique name of the DMX profile |


</div>

As children a DMX Profile has a list of [point](#user-content-point ).

##### Point

This section contains points to define the DMX profile (XML node `<Point>`). The currently defined XML attributes of a point
are specified in [table 24](#user-content-table-24 ).

<div id="table-24">

#### Table 24. *Point Attributes*

| XML Attribute Name  | Value Type                             | Description                    |
|----|----|----|
| DMXPercentage       | [Float](#user-content-attrtype-float ) | DMX percentage of the point; Unit: Percentage; Default value: 0 |
| CFC0                | [Float](#user-content-attrtype-float ) | Cubic Function Coefficient for x⁰; Default value: 0  |
| CFC1                | [Float](#user-content-attrtype-float ) | Cubic Function Coefficient for x;  Default value: 0  |
| CFC2                | [Float](#user-content-attrtype-float ) | Cubic Function Coefficient for x²; Default value: 0  |
| CFC3                | [Float](#user-content-attrtype-float ) | Cubic Function Coefficient for x³; Default value: 0  |


</div>

Find the Point with the biggest DMXPercentage below or equal x. If there is none, the output is expected to be 0.

Output(x) = CFC3 * (x - DMXPercent)³ + CFC2 * (x - DMXPercent)² + CFC1 * (x - DMXPercent) + CFC0

Here is an example where the output follows a function f for 75% of the DMX Range and another function g for the last 25%. The Point attributes are given to illustrate how they are defined.

![DMXProfile example](media/DMXProfile.png "DMXProfile example")

*Figure 1. DMXProfile example*

A Point does not have any children.

### Color Rendering Index Collect
  
#### General

This section contains TM-30-15 Fidelity Index (Rf) for 99 color samples.
Currently it does not have any XML attributes (XML node `<CRIs>`). As
children, CRIs has a list of [CRI groups](#user-content-color-rendering-index-group ).

#### Color Rendering Index Group
  
##### General

This section contains CRIs for a single color temperature (XML node
`<CRIGroup>`). The currently defined XML attributes of the CRI group are
specified in [table 25](#user-content-table-25 ).

<div id="table-25">

#### Table 25. *CRI Group Attributes*

| XML Attribute Name | Value Type                          | Description                                          |
|----|----|----|
| ColorTemperature   | [Float](#user-content-attrtype-float ) | Color temperature; Default value: 6000; Unit: Kelvin |



</div>

As children, the CRIGroup has an optional list of [Color Rendering Index](#user-content-color-rendering-index ).

##### Color Rendering Index

This section defines the CRI for one of the 99 color samples (XML node
`<CRI>`). The currently defined XML attributes of the measurement point
are specified in [table 26](#user-content-table-26 ).

<div id="table-26">

#### Table 26. *CRI Attributes*

| XML Attribute Name  | Value Type                        | Description                                                                             |
|----|----|----|
| CES                 | [Enum](#user-content-attrtype-enum ) | Color sample. The defined values are “CES01”, “CES02”, … “CES99”. Default Value “CES01" |
| ColorRenderingIndex | [UInt](#user-content-attrtype-uint ) | The color rendering index for this sample. Size: 1 byte; Default value: 100             |


</div>

The color rendering index does not have any children.

### Properties Collect
  
#### General

This section defines the general properties of the device type (XML node
`<Properties>`). The Properties Collect currently does not have any XML
attributes. The currently defined children nodes of properties collect
are specified in [table 28](#user-content-table-28 ).

<div id="table-28">

#### Table 28. *Properties Collect*

| XML node                                                 | Amount | Description                                            |
|----|----|----|
| [OperatingTemperature](#user-content-operatingtemperature ) | 0 or 1 | Temperature range in which the device can be operated. |
| [Weight](#user-content-weight )                             | 0 or 1 | Weight of the device including all accessories.        |
| [LegHeight](#user-content-legheight )                       | 0 or 1 | Height of the legs.                                    |


</div>

#### OperatingTemperature

This section defines the ambient operating temperature range (XML node
`<OperatingTemperature>`). The currently defined XML attributes of the
OperatingTemperature are specified in [table 29](#user-content-table-29 ).

<div id="table-29">

#### Table 29. *Operating Temperature Attributes*

| XML Attribute Name | Value Type                          | Description                                                                 |
|----|----|----|
| Low                | [Float](#user-content-attrtype-float ) | Lowest temperature the device can be operated. Unit: °C. Default value: 0   |
| High               | [Float](#user-content-attrtype-float ) | Highest temperature the device can be operated. Unit: °C. Default value: 40 |


</div>

The OperatingTemperature currently does not have any children.

#### Weight

This section defines the overall weight of the device (XML node
`<Weight>`). The currently defined XML attributes of the weight are
specified in [table 30](#user-content-table-30 ).

<div id="table-30">

#### Table 30. *Weight Attributes*

| XML Attribute Name | Value Type                          | Description                                                                      |
|----|----|----|
| Value              | [Float](#user-content-attrtype-float ) | Weight of the device including all accessories. Unit: kilogram. Default value: 0 |


</div>

The weight currently does not have any children.

#### LegHeight

This section defines the height of the legs (XML node `<LegHeight>`). The
currently defined XML attributes of the LegHeight are specified in
[table 31](#user-content-table-31 ).

<div id="table-31">

#### Table 31. *Leg Height Attributes*

| XML Attribute Name | Value Type                          | Description                                                                                                      |
|----|----|----|
| Value              | [Float](#user-content-attrtype-float ) | Defines height of the legs - distance between the floor and the bottom base plate. Unit: meter. Default value: 0 |


</div>

The LegHeight currently does not have any children.


## Model Collect
  
### General

Each device is divided into smaller parts: body, yoke, head and so on.
These are called geometries. Each geometry has a separate model
description and a physical description. Model collect contains model
descriptions of the fixture parts. The model collect currently does not
have any XML attributes (XML node `<Models>`). As children, Model Collect
has a list of [model](#user-content-model ).

### Model

This section defines the type and dimensions of the model (XML node
`<Model>`). The currently defined XML attributes of the model are
specified in [table 32](#user-content-table-32 ).

<div id="table-32">

#### Table 32. *Model Attributes*

| XML Attribute Name | Value Type | Description |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )       | The unique name of the model |
| Length             | [Float](#user-content-attrtype-float )     | Unit: meter; Default value: 0 |
| Width              | [Float](#user-content-attrtype-float )     | Unit: meter; Default value: 0 |
| Height             | [Float](#user-content-attrtype-float )     | Unit: meter; Default value: 0 |
| PrimitiveType      | [Enum](#user-content-attrtype-enum )       | Type of 3D model; The currently defined values are: “Undefined”, “Cube”, “Cylinder”, “Sphere”, “Base”, “Yoke”, “Head”, “Scanner”, “Conventional”, “Pigtail”, "Base1_1", "Scanner1_1", "Conventional1_1"; Default value: “Undefined” |
| File               | [Resource](#user-content-attrtype-resource )   | Optional. File name without extension and without subfolder containing description of the model. Use the following as a resource file:<br />- 3DS or GLB to file to provide 3D model.<br />- SVG file to provide the 2D symbol.<br />It is possible to add several files with the same name but different formats. Preferable format for the 3D model is GLTF. The resource files are located in subfolders of a folder called <code>./models</code>. The names of the subfolders correspond to the file format of the resource files (3ds, step, svg). The path for 3ds files would be <code>./models/3ds</code>. For glb files, it would be <code>./models/gltf</code>.</p> Software that is utilizing GDTF files should always be able to read both 3ds and GlTF file formats and should be able to write at least one of these formats. It is preferable that only one type of 3D model file formats is used within one GDTF file.<br />All dimensions in 3DS files are interpreted in millimeters (1 unit = 1 mm).|
| SVGOffsetX            | [Float](#user-content-attrtype-float )  | Offset in X from the 0,0 point to the desired insertion point of the top view svg. Unit based on the SVG. Default value: 0|
| SVGOffsetY            | [Float](#user-content-attrtype-float )  | Offset in Y from the 0,0 point to the desired insertion point of the top view svg. Unit based on the SVG. Default value: 0|
| SVGBottomOffsetX      | [Float](#user-content-attrtype-float )  | Offset in X from the 0,0 point to the desired insertion point of the bottom view svg. Unit based on the SVG. Default value: 0|
| SVGBottomOffsetY      | [Float](#user-content-attrtype-float )  | Offset in Y from the 0,0 point to the desired insertion point of the bottom view svg. Unit based on the SVG. Default value: 0|
| SVGSideOffsetX        | [Float](#user-content-attrtype-float )  | Offset in X from the 0,0 point to the desired insertion point of the side view svg. Unit based on the SVG. Default value: 0|
| SVGSideOffsetY        | [Float](#user-content-attrtype-float )  | Offset in Y from the 0,0 point to the desired insertion point of the side view svg. Unit based on the SVG. Default value: 0|
| SVGFrontOffsetX       | [Float](#user-content-attrtype-float )  | Offset in X from the 0,0 point to the desired insertion point of the front view svg. Unit based on the SVG. Default value: 0|
| SVGFrontOffsetY       | [Float](#user-content-attrtype-float )  | Offset in Y from the 0,0 point to the desired insertion point of the front view svg. Unit based on the SVG. Default value: 0|

</div>

The model currently does not have any children.

All models of a device combined should not exceed a maximum vertices count of 1200 for the default mesh level of detail.


### Primitive Types

Commonly used generic geometrical shapes and typical models of parts of
lighting fixtures are defined and provided as part of the GDTF Spec in the
attribute PrimitiveType in [table 32](#user-content-table-32). Applications
implementing the GDTF Spec can take and use these models. The Pigtail is
defining the place where connector (typically Wiring Objects) are placed.

There are three level of details that you can define:

#### Table 33. *Mesh level of detail*

<div id="table-33">

| LOD  | Description  |  Folder 3DS / gltf |
|---|---|---|
| Low  | Optional; This is the mesh for fixtures that are far away from the camera. It should have 30% of the the vertexes from the default mesh vertex count.  | `3ds_low` / `gltf_low`  |
| Default  | This is the default mesh that is used for real time visualization in preprogramming tool. It should have the minimum vertex count possible, while still looking like the fixture in 3D.  | `3ds` / `gltf` |
| High  | Optional; This is high quality mesh targeting non-realtime applications, where the vertex count is not that important. There is no limit for the vertex count. | `3ds_high` / `gltf_high`  |

</div>

Low and High meshes definitions are optional. Place the file with the same name in the defined folder.


The device shall be drawn in a hanging position displaying the front
view. That results in the pan axis is Z aligned, and the tilt axis is X
aligned.

The metric system consists of the Right-handed Cartesian Coordinates
XYZ: X – from left (-X) to right (+X), Y – from the outside of the
monitor (-Y) to the inside of the monitor (+Y), Z – from bottom (-Z) to
top (+Z). 0,0,0 – center base plate. See Figure 2.

![media/Models\_device\_hanging\_1.1.png](media/Models_device_hanging_1.1.png
"media/Models_device_hanging_1.1.png") Figure 2. Device in a hanging
position – front view

The mesh of each fixture part shall be drawn around its own suspension
point. The zero point of a device does not necessarily have to contain
the offset related to the yoke, but it must be centered on its axis of
rotation. The offset is defined by the geometry and has to be related to
its parent geometry and not to the base. 

Note 1: In general, the offsets are mostly negative, because the device is
displayed in a hanging position.

![Device Offsets](media/Models_device_offsets_1.1.png) Figure 3. Offsets of the parts

In Figure 3 the green arrow displays the offset of the yoke related to
the base. The magenta arrow displays the offset of the head related to
the yoke. The offsets are to be defined by the position matrix of the
according geometry ([table 35](#user-content-table-35 ) – [table 55](#user-content-table-55 )). 
It is important that the axis of rotation of
each device part is exactly positioned (see Figure 4).


![media/Models\_device\_rotation.png](media/Models_device_rotation.png) Figure 4. Positions of rotation axis

The dimension XML attributes of model (see [table
32](#user-content-table-32 )) are always used, no matter the scaling and
ratio of the mesh file. The mesh is explicitly scaled to this dimension.
The length defines the dimension of the model on the X axis, the width
on the Y axis and the height on the Z axis.

SVG use viewboxes to align their content. The viewbox is always defined ny the
top left of the bounding box. With the attributes `SVG_VIEW_Offset_XY` you can
define the insertion point in relation to the view box.

SVG can have background filling. This filling should have the color #C8C8C8. By
this color, any software can replace it with another color.

| Type  | Description  | Folder |
|---|---|---|
| Top View  | View from top in -Z direction. | `svg` |
| Bottom View  | View from  bottom in Z direction  | `svg_bottom` |
| Front View  | View from  front in Y direction | `svg_front` |
| Side View  | View from  front in -X direction  | `svg_side` |


![Base](media/svg/non-symetric/base.svg)


SVG images should be drawn in a 1:1 scale to the actual device. Use mm as base unit. Scaling operation from 3D meshes will not be applied to the SVG informations

### Regarding glTF Files

The used glTF files should follow these requirements:

 - Use the `glb` binary format
 - Only use the 2.0 version
 - Do not use extension
 - Do not use animations
 - Only use jpeg or png texture resource
 - all vertex attributes are `GL_FLOAT`

 ### Regarding SVG Files

- Use SVG 1.1 spec
- Don't embed bitmap images.
- Align the viewbox to the top left of the device

## Geometry Collect
  
### General

The physical description of the device parts is defined in the geometry
collect. Geometry collect can contain a separate geometry or a tree of
geometries. The geometry collect currently does not have any XML
attributes (XML node `<Geometries>`). The currently defined children nodes
of geometry collect are specified in [table 34](#user-content-table-34 ).

<div id="table-34">

#### Table 34. *Geometry Children Types*

| XML node                                                              | Amount | Description                                                                                    |
|----|----|----|
| [Geometry](#user-content-general-geometry )                           | Any    | General Geometry.                                                                              |
| [Axis](#user-content-geometry-type-axis )                             | Any    | Geometry with axis.                                                                            |
| [FilterBeam](#user-content-geometry-type-beam-filter )                | Any    | Geometry with a beam filter.                                                                   |
| [FilterColor](#user-content-geometry-type-color-filter )              | Any    | Geometry with color filter.                                                                    |
| [FilterGobo](#user-content-geometry-type-gobo-filter )                | Any    | Geometry with gobo.                                                                            |
| [FilterShaper](#user-content-geometry-type-shaper-filter )            | Any    | Geometry with shaper.                                                                          |
| [Beam](#user-content-geometry-type-beam )                             | Any    | Geometry that describes a light output to project.                                             |
| [MediaServerLayer](#user-content-geometry-type-media-server-layer )   | Any    | Geometry that describes a media representation layer of a media device.                        |
| [MediaServerCamera](#user-content-geometry-type-media-server-camera ) | Any    | Geometry that describes a camera or output layer of a media device.                            |
| [MediaServerMaster](#user-content-geometry-type-media-server-master ) | Any    | Geometry that describes a master control layer of a media device.                              |
| [Display](#user-content-geometry-type-display )                       | Any    | Geometry that describes a surface to display visual media.                                     |
| [GeometryReference](#user-content-geometry-type-reference )           | Any    | Reference to already described geometries.                                                     |
| [Laser](#user-content-geometry-type-laser )                           | Any    | Geometry with a laser light output.                                                            |
| [WiringObject](#user-content-geometry-type-wiring-object )            | Any    | Geometry that describes an internal wiring for power or data.                                  |
| [Inventory](#user-content-geometry-type-inventory )                   | Any    | Geometry that describes an additional item that can be used for a fixture (like a rain cover). |
| [Structure](#user-content-geometry-type-structure )                   | Any    | Geometry that describes the internal framing of an object (like members).                      |
| [Support](#user-content-geometry-type-support )                       | Any    | Geometry that describes a support like a base plate or a hoist.                                |
| [Magnet](#user-content-geometry-type-magnet )                         | Any    | Geometry that describes a point where other geometries should be attached.                     |
| [Speaker](#user-content-geometry-type-speaker )                       | Any    | Geometry with a speaker as the source of sound from an audio device.                           |


</div>

Note 1: Position the geometry in it's "Default" position. This is defined by
the Default Value from the DMX Channel that controls the position of that
geometry.

### General Geometry

It is a basic geometry type without specification (XML node `<Geometry>`).
The currently defined XML attributes of the geometry are specified in
[table 35](#user-content-table-35 ).

<div id="table-35">

#### Table 35. *Geometry Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                                                                                             |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of geometry. Recommendation for conventional is “Body”. Recommendation for a geometry that is representing the base housing of a moving head is “Base”. |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                                                                                                                                        |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                           |


</div>

The geometry has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


### Geometry Type Axis

This type of geometry defines device parts with a rotation axis (XML
node `<Axis>`). The currently defined XML attributes of the axis are
specified in [table 36](#user-content-table-36 ).

<div id="table-36">

#### Table 36. *Axis Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                                                                                                                                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry. Recommendation for an axis-geometry is “Yoke”. Recommendation for an axis-geometry representing the lamp housing of a moving head is “Head”. Note: The Head of a moving head is usually mounted to the Yoke. |
| Model           | [Name](#user-content-attrtype-name ) | Link to the corresponding model. Matrix                                                                                                                                                                                 |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                                                                                                 |


</div>

The axis has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


### Geometry Type Beam Filter

This type of geometry defines device parts with a beam filter (XML node
`<FilterBeam>`). The currently defined XML attributes of the beam filter
are specified in [table 37](#user-content-table-37 ).

<div id="table-37">

#### Table 37. *Beam Filter Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                                                                                                                                                                              |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry. Recommendation for beam filter limiting the diffusion of light is “BarnDoor”. Recommendation for beam filter adjusting the diameter of the beam is “Iris”. Note: BarnDoor and Iris are usually mounted to conventional. |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                                                                                                                                                                                                                         |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                                                                                                            |


</div>

The beam filter has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).

### Geometry Type Color Filter

This type of geometry is used to describe device parts which have a
color filter (XML node `<FilterColor>`). The currently defined XML
attributes of the color filter are specified in [table 38](#user-content-table-38 ).

<div id="table-38">

#### Table 38. *Color Filter Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                                                                                           |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of geometry. Recommendation for filter of a color or mechanical color changer is “FilterColor”. Note: FilterColor is usually mounted to conventional. |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                                                                                                                                      |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                         |


</div>

The color filter has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


### Geometry Type Gobo Filter

This type of geometry is used to describe device parts which have gobo
wheels (XML node `<FilterGobo>`). The currently defined XML attributes of
the gobo filter are specified in [table 39](#user-content-table-39 ).

<div id="table-39">

#### Table 39. *Gobo Filter Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                                                                                           |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry. Recommendation for filter of a gobo or mechanical gobo changer is “FilterGobo”. Note: FilterGobo is usually mounted to conventional. |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                                                                                                                                      |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                         |


</div>

The gobo filter has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


### Geometry Type Shaper Filter

This type of geometry is used to describe device parts which have a
shaper (XML node `<FilterShaper>`). The currently defined XML attributes
of the shaper filter are specified in [table 40](#user-content-table-40 ).

<div id="table-40">

#### Table 40. *Shaper Filter Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                                                                                                                 |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry; Recommendation for filter used to form the beam to a framed, triangular, or trapezoid shape, is “Shaper”. Note: Shaper is usually mounted to conventional. |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                                                                                                                                                            |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                                               |


</div>

The shaper filter has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


### Geometry Type Beam

This type of geometry is used to describe device parts which have a
light source (XML node `<Beam>`). The currently defined XML attributes of
the Beam are specified in [table 41](#user-content-table-41 ).

<div id="table-41">

#### Table 41. *Beam Attributes*

| XML Attribute Name  | Value Type                            | Description                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |
|----|----|----|
| Name                | [Name](#user-content-attrtype-name )     | The unique name of the geometry. Recommendation for a light source of a conventional or moving head or a projector is “Beam”. Note 1: Beam is usually mounted to Head or Body. Recommendation for a self-emitting single light source is “Pixel”. Note 2: Pixel is usually mounted to Head or Body. Recommendation for a number of Pixel that are controlled at the same time is “Array”. Note 3: Array is usually mounted to Head or Body. Recommendation for a light source of a moving mirror is “Mirror”. Note 4: Mirror is usually mounted to Yoke. |
| Model               | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
| Position            | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
| LampType            | [Enum](#user-content-attrtype-enum )     | Defines type of the light source; The currently defined types are: Discharge, Tungsten, Halogen, LED, Plasma, Laser, Other; Default value “Discharge”                                                                                                                                                                                                                                                                                                                                                                                                                          |
| PowerConsumption    | [Float](#user-content-attrtype-float )   | Power consumption; Default value: 1000; Unit: Watt                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
| LuminousFlux        | [Float](#user-content-attrtype-float )   | Intensity of all the represented light emitters; Default value: 10000; Unit: lumen                                                                                                                                                                                                                                                                                                                                                                                                                                                                       |
| ColorTemperature    | [Float](#user-content-attrtype-float )   | Color temperature; Default value: 6000; Unit: kelvin                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     |
| BeamAngle           | [Float](#user-content-attrtype-float )   | Beam angle; Default value: 25.0; Unit: degree                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            |
| FieldAngle          | [Float](#user-content-attrtype-float )   | Field angle; Default value: 25.0; Unit: degree                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |
| ThrowRatio          | [Float](#user-content-attrtype-float )   | Throw Ratio of the lens for BeamType Rectangle; Default value: 1; Unit: None                                                                                                                                                                                                                                                                                                                                                                                                                                                                             |
| RectangleRatio      | [Float](#user-content-attrtype-float )   | Ratio from Width to Height of the Rectangle Type Beam; Default value: 1.7777; Unit: None                                                                                                                                                                                                                                                                                                                                                                                                                                                                 |
| BeamRadius          | [Float](#user-content-attrtype-float )   | Beam radius on starting point. Default value: 0.05; Unit: meter.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
| BeamType            | [Enum](#user-content-attrtype-enum )     | Beam Type; Specified values: "Wash", "Spot", "None", "Rectangle", "PC", "Fresnel", "Glow". Default value "Wash"
| ColorRenderingIndex | [Uint](#user-content-attrtype-uint )     | The CRI according to TM-30 is a quantitative measure of the ability of the light source showing the object color naturally as it does as daylight reference. Size 1 byte. Default value 100.                                                                                                                                                                                                                                                                                                                                                             |
| EmitterSpectrum     | [Node](#user-content-attrtype-node )     | Optional link to emitter in the physical description; use this to define the white light source of a subtractive color mixing system or the color for the beam when no color mixing is defined. Starting point: Emitter Collect; Default spectrum is a Black-Body with the defined ColorTemperature.                                                                                                                                                                                                                                                                                                                                                                   |
| Photometric     | [Resource](#user-content-attrtype-resource )     | Optional. File name without extension and without subfolder containing description of the IES or EULUMDAT file in the subfolder `./photometric/`.                                                                                                                                                                                                                                                                                                                                                                |

</div>

The beam has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


Use the Geometry Type "Beam" to describe the position of the fixture's
light output (usually the position of the lens) and not the position of
the light source inside the device. The origin of the Geometry Type
"Beam" is the origin of the rendered beam. The origin of the Geometry
Type "Beam" should not be covered by any faces of other geometries in
order to not block the rendered beam.

The `<BeamType>` describes how the Beam will be rendered.

"Wash", "Fresnel", "PC"- A conical beam with soft edges and softened field projection.

"Spot" - A conical beam with hard edges.

"Rectangle" - A pyramid-shaped beam with hard edges.

"None", "Glow" - No beam will be drawn, only the geometry will emit light
itself.

The beam geometry emits its light into negative Z direction (and Y-up).

### Geometry Type Media Server Layer

This type of geometry is used to describe the layer of a media device
that is used for representation of media files (XML node
`<MediaServerLayer>`). The currently defined XML attributes of the media
server layer are specified in [table 42](#user-content-table-42 ).

<div id="table-42">

#### Table 42. *Media Server Layer Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                       |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry.                                                                  |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model that will be used to display the alignment in media server space. |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                     |


</div>

The media server layer has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

### Geometry Type Media Server Camera

This type of geometry is used to describe the camera or output of a
media device (XML node `<MediaServerCamera>`). The currently defined XML
attributes of the media server camera are specified in [table
43](#user-content-table-43 ).

<div id="table-43">

#### Table 43. *Media Server Camera Attributes*

| XML Attribute Name | Value Type                            | Description                                                                                       |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry.                                                                  |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model that will be used to display the alignment in media server space. |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                     |


</div>

The media server camera has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

The media server camera-view points into the positive Y-direction (and
Z-up).

### Geometry Type Media Server Master

This type of geometry is used to describe the master control of one or
several media devices (XML node `<MediaServerMaster>`). The currently
defined XML attributes of the media server master are specified in
[table 44](#user-content-table-44 ).

<div id="table-44">

#### Table 44. *Media Server Master Attributes*

| XML Attribute Name | Value Type                            | Description                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the geometry.                              |
| Model              | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                              |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix |


</div>

The media server master has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

### Geometry Type Display

This type of geometry is used to describe a self-emitting surface which
is used to display visual media (XML node `<Display>`). The currently
defined XML attributes of the display are specified in [table 45](#user-content-table-45 ).

<div id="table-45">

#### Table 45. *Display Attributes*

| XML Attribute Name | Value Type                                | Description                                                                               |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | The unique name of the geometry.                                                          |
| Model              | [Name](#user-content-attrtype-name )         | Link to the corresponding model.                                                          |
| Position           | [Matrix](#user-content-attrtype-matrix )     | Relative position of geometry; Default value: Identity Matrix                             |
| Texture            | [Resource](#user-content-attrtype-resource ) | Name of the mapped texture in Model file that will be swapped out for the media resource. |


</div>

The display has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).


### Geometry Type Laser
  
#### General

This type of geometry is used to describe the position of a laser's 
light output (XML node `<Laser>`). The currently
defined XML attributes of the laser are specified in [table 46](#user-content-table-46 ).

<div id="table-46">

#### Table 46. *Laser Attributes*

| XML Attribute Name | Value Type     |                    |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )      | The unique name of the geometry.                                                                               |
| Model              | [Name](#user-content-attrtype-name )      | Link to the corresponding model.                                                                               |
| Position           | [Matrix](#user-content-attrtype-matrix )  | Relative position of geometry; Default value: Identity Matrix                                                  |
| ColorType <a id="attrtype-colortype" />         | [Enum](#user-content-attrtype-enum )      | The currently defined unit values are: “RGB”, “SingleWaveLength”,  Default: RGB.                               |
| Color              | [Float](#user-content-attrtype-float)     | Required if [ColorType](#user-content-attrtype-colortype) is "SingleWaveLength"; Unit:nm (nanometers)                                            |
| OutputStrength     | [Float](#user-content-attrtype-float)     | Output Strength of the Laser; Unit: Watt                                                              |
| Emitter            | [Node](#user-content-attrtype-node )      | Optional link to the emitter group. The starting point is the [Emitter Collect](#user-content-emitter-collect ). |
| BeamDiameter       | [Float](#user-content-attrtype-float)     | Beam diameter where it leaves the projector; Unit: meter                                            |
| BeamDivergenceMin  | [Float](#user-content-attrtype-float)     | Minimum beam divergence; Unit: mrad  (milliradian)                                                             |
| BeamDivergenceMax  | [Float](#user-content-attrtype-float)     | Maximum beam divergence; Unit: mrad  (milliradian)                                                             |
| ScanAnglePan       | [Float](#user-content-attrtype-float)     | Possible Total Scan Angle Pan of the beam. Assumes symmetrical output; Unit: Degree                            |
| ScanAngleTilt      | [Float](#user-content-attrtype-float)     | Possible Total Scan Angle Tilt of the beam. Assumes symmetrical output; Unit: Degree                           |
| ScanSpeed          | [Float](#user-content-attrtype-float)     | Speed of the beam; Unit: kilo point per second                                                                 |


</div>

The laser has the same children types as the geometry collect (see
[table 34](#user-content-table-34 )).

In addition, it also has a list of supported protocols (XML node `<Protocol>`) as children.

#### Protocol

This XML node specifies the protocol for a Laser (XML node `<Protocol>`). The currently defined XML
attributes of the protocol are specified in [table 47](#user-content-table-47 ).

<div id="table-47">

#### Table 47 *Protocol attributes*

| XML Attribute Name | Value Type                                    | Description                                                                                              |
|----|----|----|
| Name          | [String](#user-content-attrtype-string ) | Name of the protocol                      |

The protocol doesn't have any children.

### Geometry Type Reference
  
#### General

The Geometry Type Reference is used to describe multiple instances of
the same geometry. Example: LED panel with multiple pixels. (XML node `<GeometryReference>`).
The currently defined XML attributes of reference are specified in
[table 48](#user-content-table-48). 

Note 1: Geometry Reference also allows easier definition of the DMX Channels
for these geometries.

<div id="table-48">

#### Table 48. *Geometry Reference Attributes*

| XML Attribute Name | Value Type                            | Description    |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of geometry.                                                                                                                                                                                                                                                                               |
| Position           | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix                                                                                                                                                                                                                                              |
| Geometry           | [Name](#user-content-attrtype-name )     | Name of the referenced geometry. Only top level geometries are allowed to be referenced.                                                                                                                                                                                                                   |
| Model              | [Name](#user-content-attrtype-name )     | Optional. Link to the corresponding model. The model only replaces the model of the parent of the referenced geometry. The models of the children of the referenced geometry are not affected. The starting point is Models Collect. If model is not set, the model is taken from the referenced geometry. |
| Photometric              | [Resource](#user-content-attrtype-resource )     | Optional. File name without extension and without subfolder containing description of the IES or EULUMDAT file in the subfolder `./photometric/`.   The Photometric only replaces the Photometric of the parent of the referenced geometry. The Photometric of the children of the referenced geometry are not affected. The starting point is Models Collect. If Photometric is not set, the Photometric is taken from the referenced geometry. |


</div>

As children, the Geometry Type Reference has a list of [Breaks](#break). The
count of the children depends on the number of different breaks in the DMX
channels of the referenced geometry. [Listing
Breaks](#user-content-listing-breaks) shows an example where referenced
geometry has DMX channels with DMX break 2 and 4, the geometry reference has to
have 2 children. The first child with DMX offset for DMX break 2 and the second
child for DMX break 4.

<div id="listing-breaks">

#### Listing *Breaks*

```xml
<GeometryReference Geometry="Pixel" Name="Reference 1" Position="{1.000000,0.000000,0.000000,0.000000}{0.000000,1.000000,0.000000,0.000000}{0.000000,0.000000,1.000000,0.000000}{0,0,0,1}">
      <Break DMXBreak="1" DMXOffset="1"/>
      <Break DMXBreak="2" DMXOffset="1"/>
</GeometryReference>
```

If one or more of the DMX channels of the referenced geometry have the special
value “Overwrite” as a DMX break, the DMX break for those channels and the DMX
offsets need to be defined and it must be the last child of the list of Breaks.

<div id="listing-breaks-overwrite">

#### Listing *Breaks With Overwrite*

```xml
<GeometryReference Geometry="Pixel" Name="Reference 1" Position="{1.000000,0.000000,0.000000,0.000000}{0.000000,1.000000,0.000000,0.000000}{0.000000,0.000000,1.000000,0.000000}{0,0,0,1}">
    <Break DMXBreak="1" DMXOffset="1"/>
    <Break DMXBreak="2" DMXOffset="1"/>
    <Break DMXBreak="1" DMXOffset="2"/>
</GeometryReference>
```

#### Break

This XML node specifies the DMX offset for the DMX channel of the
referenced geometry (XML node `<Break>`). The currently defined XML
attributes of the break are specified in [table 49](#user-content-table-49 ).

<div id="table-49">

#### Table 49. *Break Attributes*

| XML Attribute Name | Value Type                                    | Description                                                                                              |
|----|----|----|
| DMXOffset          | [DMXAddress](#user-content-attrtype-dmxaddress ) | DMX offset; Default value:1 (Means no offset for the corresponding DMX Channel)                          |
| DMXBreak           | [Uint](#user-content-attrtype-uint )             | Defines the unique number of the DMX Break for which the Offset is given. Size: 1 byte; Default value 1. |


</div>


### Geometry Type Wiring Object
  
#### General

This type of geometry is used to describe an electrical device that can be wired (XML node `<WiringObject>`). The currently
defined XML attributes of a wiring object geometry are specified in [table 50](#user-content-table-50 ).

<div id="table-50">

#### Table 50. *Wiring Object Attributes*

| XML Attribute Name  | Value Type                                | Description                                                                                       |
|----|----|----|
| Name                | [Name](#user-content-attrtype-name )      | The unique name of the geometry. The name is also the name of the interface to the outside        |
| Model               | [Name](#user-content-attrtype-name )      | Link to the corresponding model.                                                                  |
| ConnectorType   <a id="attrtype-connectortype" />    | [Name](#user-content-attrtype-name )      | The type of the connector. Find a list of predefined types in [Annex D](#user-content-table-d1 ). This is not applicable for Component Types Fuses. Custom type of connector can also be defined, for example "Loose End".|
| Position            | [Matrix](#user-content-attrtype-matrix )  | Relative position of geometry; Default value: Identity Matrix                                     |
| ComponentType       | [Enum](#user-content-attrtype-enum )      | The type of the electrical component used. Defined values are "Input", "Output", "PowerSource", "Consumer", "Fuse", "NetworkProvider", "NetworkInput", "NetworkOutput", "NetworkInOut". |
| SignalType          | [String](#user-content-attrtype-string )  | The type of the signal used. Predefinded values are "Power", "DMX512", "Protocol", "AES", "AnalogVideo", "AnalogAudio". When you have a custom protocol, you can add it here.        |
| PinCount            | [Int](#user-content-attrtype-int )        | The number of available pins of the connector type to connect internal wiring to it.              |
| ElectricalPayLoad   | [Float](#user-content-attrtype-float )    | The electrical consumption in Watts. Only for [Consumers](#user-content-attrtype-connectortype ). Unit: Watt.                                         |
| VoltageRangeMax     | [Float](#user-content-attrtype-float )    | The voltage range's maximum value. Only for [Consumers](#user-content-attrtype-connectortype ). Unit:volt.                                           |
| VoltageRangeMin     | [Float](#user-content-attrtype-float )    | The voltage range's minimum value. Only for [Consumers](#user-content-attrtype-connectortype ). Unit: volt.                                            |
| FrequencyRangeMax     | [Float](#user-content-attrtype-float )    | The Frequency range's maximum value. Only for [Consumers](#user-content-attrtype-connectortype ). Unit: hertz.                                           |
| FrequencyRangeMin     | [Float](#user-content-attrtype-float )    | The Frequency range's minimum value. Only for [Consumers](#user-content-attrtype-connectortype ). Unit: hertz.                                            |
| MaxPayLoad          | [Float](#user-content-attrtype-float )    | The maximum electrical payload that this power source can handle. Only for [Power Sources](#user-content-attrtype-connectortype ). Unit: voltampere.        |
| Voltage             | [Float](#user-content-attrtype-float )    | The voltage output that this power source can handle. Only for [Power Sources](#user-content-attrtype-connectortype ). Unit: volt.                     |
| SignalLayer         | [Integer](#user-content-attrtype-integer )  | The layer of the Signal Type. In one device, all wiring geometry that use the same Signal Layers are connected. Special value 0: Connected to all geometries. |
| CosPhi              | [Float](#user-content-attrtype-float )    | The Power Factor of the device. Only for consumers.                                               |
| FuseCurrent         | [Float](#user-content-attrtype-float )    | The fuse value. Only for fuses. Unit: ampere.                                                                   |
| FuseRating          | [Enum](#user-content-attrtype-enum )      | Fuse Rating. Defined values are "B", "C", "D", "K", "Z".                                          |
| Orientation         | [Enum](#user-content-attrtype-enum )      | Where the pins are placed on the object. Defined values are "Left", "Right", "Top", "Bottom".     |
| WireGroup           | [String](#user-content-attrtype-string )  | Name of the group to which this wiring object belong.                                             |


</div>

The wiring object has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).
In addition, it also has pin patch (XML node `<PinPatch>`) children.

#### Pin Patch

This XML node (XML node `<PinPatch>`) specifies how the different sockets of its parent
wiring object are connected to the pins of other wiring objects. The currently
defined XML attributes of a pin patch are specified in [table 51](#user-content-table-51 ).

<div id="table-51">

#### Table 51. *Pin Patch Attributes*

| XML Attribute Name  | Value Type                               | Description                                                                                            |
|----|----|----|
| ToWiringObject      | [Node](#user-content-attrtype-node )     | Link to the wiring object connected through this pin patch.                                         |
| FromPin          | [Int](#user-content-attrtype-int )       | The pin number used by the parent wiring object to connect to the targeted wiring object "ToWiringObject". |
| ToPin            | [Int](#user-content-attrtype-int )       | The pin number used by the targeted wiring object "ToWiringObject" to connect to the parent wiring object. |


</div>

The pin patch doesn't have any children.

### Geometry Type Inventory

This type of geometry is used to describe a geometry used for the inventory (XML node `<Inventory>`). The currently
defined XML attributes of an inventory geometry are specified in
[table 52](#user-content-table-52 ).

<div id="table-52">

#### Table 52. *Inventory Attributes*

| XML Attribute Name  | Value Type                               | Description                                                    |
|----|----|----|
| Name                | [Name](#user-content-attrtype-name )     | The unique name of the geometry.                               |
| Model               | [Name](#user-content-attrtype-name )     | Link to the corresponding model.                               |
| Position            | [Matrix](#user-content-attrtype-matrix ) | Relative position of geometry; Default value: Identity Matrix  |
| Count               | [Int](#user-content-attrtype-int )       | The default count for new objects.                             |


</div>

The inventory geometry has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

### Geometry Type Structure

This type of geometry is used to describe a structure (XML node `<Structure>`). The currently
defined XML attributes of a structure geometry are specified in
[table 53](#user-content-table-53 ).

<div id="table-53">

#### Table 53. *Structure Attributes*

| XML Attribute Name        | Value Type                                | Description                                                             |
|----|----|----|
| Name                      | [Name](#user-content-attrtype-name )      | The unique name of the geometry.                                        |
| Model                     | [Name](#user-content-attrtype-name )      | Link to the corresponding model.                                        |
| Position                  | [Matrix](#user-content-attrtype-matrix )  | Relative position of geometry; Default value: Identity Matrix           |
| LinkedGeometry            | [Name](#user-content-attrtype-name )      | The linked geometry.                                                    |
| StructureType             | [Enum](#user-content-attrtype-enum )      | The type of structure. Defined values are "CenterLineBased", "Detail".  |
| CrossSectionType  <a id="attrtype-crosssectiontype" />        | [Enum](#user-content-attrtype-enum )      | The type of cross section. Defined values are "TrussFramework", "Tube".       |
| CrossSectionHeight        | [Float](#user-content-attrtype-float )    | The height of the cross section. Only for [Tubes](#user-content-attrtype-crosssectiontype ). Unit: meter.                        |
| CrossSectionWallThickness | [Float](#user-content-attrtype-float )    | The thickness of the wall of the cross section.Only for [Tubes](#user-content-attrtype-crosssectiontype ). Unit: meter.          |
| TrussCrossSection         | [String](#user-content-attrtype-string )  | The name of the truss cross section. Only for [Trusses](#user-content-attrtype-crosssectiontype ).                  |


</div>

The structure geometry has the same children types as the geometry
collect (see [table 34](#user-content-table-34)).

### Geometry Type Support

This type of geometry is used to describe a support (XML node `<Support>`). The currently
defined XML attributes of a support geometry are specified in
[table 54](#user-content-table-54 ).

<div id="table-54">

#### Table 54. *Support Attributes*

| XML Attribute Name        | Value Type                                | Description                                                                                                                            |
|----|----|----|
| Name                      | [Name](#user-content-attrtype-name )      | The unique name of the geometry.                                                                                                       |
| Model                     | [Name](#user-content-attrtype-name )      | Link to the corresponding model.                                                                                                       |
| Position                  | [Matrix](#user-content-attrtype-matrix )  | Relative position of geometry; Default value: Identity Matrix                                                                          |
| SupportType    <a id="attrtype-supporttype" />           | [Enum](#user-content-attrtype-enum )      | The type of support. Defined values are "Rope", "GroundSupport".                                        |
| RopeCrossSection          | [String](#user-content-attrtype-string )  | The name of the rope cross section. Only for [Ropes](#user-content-attrtype-supporttype ).                                             |
| RopeOffset                | [Vector3](#user-content-attrtype-vector3 )| The Offset of the rope from bottom to top. Only for [Ropes](#user-content-attrtype-supporttype ). Unit: meter.                                     |
| CapacityX                 | [Float](#user-content-attrtype-float )    | The allowable force on the X-Axis applied to the object according to the Eurocode. Unit: N.                                            |
| CapacityY                 | [Float](#user-content-attrtype-float )    | The allowable force on the Y-Axis applied to the object according to the Eurocode. Unit: N.                                            |
| CapacityZ                 | [Float](#user-content-attrtype-float )    | The allowable force on the Z-Axis applied to the object according to the Eurocode. Unit: N.                                            |
| CapacityXX                | [Float](#user-content-attrtype-float )    | The allowable moment around the X-Axis applied to the object according to the Eurocode. Unit: N/m.                                     |
| CapacityYY                | [Float](#user-content-attrtype-float )    | The allowable moment around the Y-Axis applied to the object according to the Eurocode. Unit: N/m.                                     |
| CapacityZZ                | [Float](#user-content-attrtype-float )    | The allowable moment around the Z-Axis applied to the object according to the Eurocode.  Unit: N/m.                                    |
| ResistanceX               | [Float](#user-content-attrtype-float )    | The compression ratio for this support along the X-Axis. Unit N/m. Only for [Ground Supports](#user-content-attrtype-supporttype ).   |
| ResistanceY               | [Float](#user-content-attrtype-float )    | The compression ratio for this support along the Y-Axis. Unit N/m. Only for [Ground Supports](#user-content-attrtype-supporttype ).   |
| ResistanceZ               | [Float](#user-content-attrtype-float )    | The compression ratio for this support along the Z-Axis. Unit N/m. Only for [Ground Supports](#user-content-attrtype-supporttype ).   |
| ResistanceXX              | [Float](#user-content-attrtype-float )    | The compression ratio for this support around the X-Axis. Unit N/m. Only for [Ground Supports](#user-content-attrtype-supporttype ).  |
| ResistanceYY              | [Float](#user-content-attrtype-float )    | The compression ratio for this support around the Y-Axis. Unit N/m. Only for [Ground Supports](#user-content-attrtype-supporttype ).  |
| ResistanceZZ              | [Float](#user-content-attrtype-float )    | The compression ratio for this support around the Z-Axis. Unit N/m. Only for [Ground Supports](#user-content-attrtype-supporttype ).  |


</div>

The support geometry has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

### Geometry Type Magnet

This type of geometry is used to describe a magnet, a point where other geometries should be attached (XML node `<Magnet>`). The currently
defined XML attributes of a magnet geometry are specified in
[table 55](#user-content-table-55 ).

<div id="table-55">

#### Table 55. *Magnet Attributes*

| XML Attribute Name        | Value Type                                | Description                                                                                     |
|----|----|----|
| Name                      | [Name](#user-content-attrtype-name )      | The unique name of the geometry.                                                                |
| Model                     | [Name](#user-content-attrtype-name )      | Link to the corresponding model.                                                                |
| Position                  | [Matrix](#user-content-attrtype-matrix )  | Relative position of geometry; Default value: Identity Matrix                                   |


</div>

The magnet geometry has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

### Geometry Type Speaker

This type of geometry is used to describe the position of the speaker which is a source of sound (XML node <Speaker>). 
The currently defined XML attributes of the speaker are specified in [table 56](#user-content-table-56 ).

<div id="table-56">

#### Table 56. *Speaker Attributes*

| XML Attribute Name        | Value Type                                | Description                                                                                     |
|----|----|----| 
| Name                      | [Name](#user-content-attrtype-name )      | The unique name of the geometry.                                                                |
| Model                     | [Name](#user-content-attrtype-name )      | Link to the corresponding model.                                                                |
| Position                  | [Matrix](#user-content-attrtype-matrix )  | Relative position of geometry; Default value: Identity Matrix                                   |
| FrequencyMin              | [Float](#user-content-attrtype-float )    | Minimal Frequency of the Speaker.                                                               |
| FrequencyMax              | [Float](#user-content-attrtype-float )    | Maximal Frequency of the Speaker.                                                               |
| AngleVertical             | [Float](#user-content-attrtype-float )    | Angle of the vertical distribution.                                                             |
| AngleHorizontal           | [Float](#user-content-attrtype-float )    | Angle of the horizontal distribution.                                                           |
| MaxSPL                    | [Float](#user-content-attrtype-float )    | Max Sound Pressure.                                                                             |
| Impedance                 | [Float](#user-content-attrtype-float )    | Nominal impedance of the speaker.                                                               |


</div>

The speaker geometry has the same children types as the geometry
collect (see [table 34](#user-content-table-34 )).

Use the Geometry Type "Speaker" to describe the position of the fixture's sound output. The origin of the Geometry Type "Speaker" should not be covered by 
any faces of other geometries in order to not block the rendered sound plane.

The speaker geometry emits its sound into negative Y direction.

## DMX Mode Collect
  
### General

This section is describes all DMX modes of the device. If firmware
revisions change a DMX footprint, then such revisions should be
specified as new DMX mode. The DMX mode collect currently does not have
any attributes (XML node `<DMXModes>`). As a child the fixture type DMX
mode collect has DMX modes.

### DMX Mode

Each DMX mode describes logical control part of the device in a specific
mode (XML node `<DMXMode>`). The currently defined XML attributes of the
DMX mode are specified in [table 57](#user-content-table-57 ).

<div id="table-57">

#### Table 57. *DMX Mode Attributes*

| XML Attribute Name | Value Type                        | Description                                                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name ) | The unique name of the DMX mode                                                               |
| Description        | [String](#user-content-attrtype-string ) | Description of the DMX mode                                                               |
| Geometry           | [Name](#user-content-attrtype-name ) | Name of the first geometry in the device; Only top level geometries are allowed to be linked. |


</div>

DMX mode children are specified in [table 58](#user-content-table-58 ).

<div id="table-58">

#### Table 58. *DMX Mode Children*

| XML node                                       | Mandatory | Description                                      |
|----|----|----|
| [DMXChannels](#user-content-dmx-channel-collect ) | Yes       | Description of all DMX channels used in the mode |
| [Relations](#user-content-relation-collect )      | No        | Description of relations between channels        |
| [FTMacros](#user-content-macro-collect )      | No        | Is used to describe macros of the manufacturer.  |


</div>

#### DMX Channel Collect
  
##### General

This section defines the DMX footprint of the device. The DMX channel
collect currently does not have any attributes (XML node `<DMXChannels>`).
As children the DMX channel collect has a list of a [DMX
channels](#user-content-dmx-channel ).

##### DMX Channel
  
###### General

This section defines the DMX channel (XML node `<DMXChannel>`). The name
of a DMX channel cannot be user-defined and must consist of a geometry
name and the attribute name of the first logical channel with separator
"\_". In one DMX Mode, this combination needs to be unique. Currently
defined XML attributes of the DMX channel are specified in [table
59](#user-content-table-59).

<div id="table-59">

#### Table 59. *DMX Channel Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                                                                    |
|----|----|----|
| DMXBreak           | [Int](#user-content-attrtype-int )           | Number of the DMXBreak; Default value: 1; Special value: “Overwrite” – means that this number will be overwritten by Geometry Reference; Size: 4 bytes                                                         |
| Offset             | [Array of Int](#user-content-attrtype-int )  | Relative addresses of the current DMX channel from highest to least significant; Separator of values is ","; Special value: “None” – does not have any addresses; Default value: “None”; Size per int: 4 bytes |
| InitialFunction    | [Node](#user-content-attrtype-node )         | Link to the channel function that will be activated by default for this DMXChannel. Default value is the first channel function of the first logical channel of this DMX channel.                                                                                                                            |
| Highlight          | [DMXValue](#user-content-attrtype-dmxvalue ) | Highlight value for current channel; Special value: “None”. Default value: “None”.                                                                                                                             |
| Geometry           | [Name](#user-content-attrtype-name )         | Name of the geometry the current channel controls.                                                                                                                                                             |

If the Offset is set as None the resolution for the DMX Channel is 16bit.

</div>

The `Geometry` should be the place in the tree of geometries where the function
of the DMX Channel (as defined by ChannelFunction) is located either physically
or logically. If the DMX channel doesn't have a location, put it in the top
level geometry of the geometry tree. Attributes follow a trickle down
principle, so they are inherited from top down.

In a DMX Mode, DMX Channels must form a continuous sequence of Offsets without
gaps. If a specific DMX Offset is unused, a corresponding DMX Channel shall
still be defined at that Offset, and its associated LogicalChannel shall have
the NoFeature Fixture Type Attribute assigned.

As children the DMX channel has a list of [logical
channels](#user-content-logical-channel ).

###### Logical Channel

The Fixture Type Attribute is assigned to a LogicalChannel and defines
the function of the LogicalChannel. All logical channels that are
children of the same DMX channel are mutually exclusive. In a DMX mode,
only one logical channel with the same attribute can reference the same
geometry at a time. The name of a Logical Channel cannot be user-defined
and is equal to the linked attribute name. The XML node of the logical
channel is `<LogicalChannel>`. The currently defined XML attributes of the
logical channel are specified in [table 59](#user-content-table-59 ).

<div id="table-60">

#### Table 60. *Logical Channel Attributes*

| XML Attribute Name | Value Type                          | Description                                                                                                                                                                                  |
|----|----|----|
| Attribute          | [Node](#user-content-attrtype-node )   | Link to the attribute; The starting point is the Attribute Collect (see [Annex A](#user-content-annex-a-normative-attribute-definitions)).                                                              |
| Snap               | [Enum](#user-content-attrtype-enum )   | If snap is enabled, the logical channel will not fade between values. Instead, it will jump directly to the new value.; Value: “Yes”, “No”, “On”, “Off”. Default value: “No”                 |
| Master             | [Enum](#user-content-attrtype-enum )   | Defines if all the subordinate channel functions react to a Group Control defined by the control system. Values: “None”, “Grand”, “Group”; Default value: “None”.                            |
| MibFade            | [Float](#user-content-attrtype-float ) | Minimum fade time for moves in black action. MibFade is defined for the complete DMX range. Default value: 0; Unit: second                                                                   |
| DMXChangeTimeLimit | [Float](#user-content-attrtype-float ) | Minimum fade time for the subordinate channel functions to change DMX values by the control system. DMXChangeTimeLimit is defined for the complete DMX range. Default value: 0; Unit: second |


</div>

As a child the logical channel has a list of a [channel
function](#user-content-channel-function ).

###### Channel Function

The Fixture Type Attribute is assigned to a Channel Function and defines
the function of its DMX Range. (XML node `<ChannelFunction>`). The
currently defined XML attributes of channel function are specified in
[table 61](#user-content-table-61 ).

<div id="table-61">

#### Table 61. *Channel Function Attributes*

| XML Attribute Name | Value Type                                   | Description                                                                                                                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | Unique name; Default value: Name of Attribute and 1-based index of Channel Function inside the Logical Channel, separated by a space; Example: "Dimmer 1".                                                                                 |
| Attribute          | [Node](#user-content-attrtype-node )         | Link to attribute; Starting point is the attributes node. Default value: “NoFeature”.                                                                         |
| OriginalAttribute  | [String](#user-content-attrtype-string )     | The manufacturer's original name of the attribute; Default: empty                                                                                             |
| DMXFrom            | [DMXValue](#user-content-attrtype-dmxvalue ) | Start DMX value; The end DMX value is calculated as a DMXFrom of the next channel function – 1 or the maximum value of the DMX channel. Default value: "0/1". |
| Default            | [DMXValue](#user-content-attrtype-dmxvalue ) | Default DMX value of channel function when activated by the control system. Default value: value of the DMXFrom field                                         |
| PhysicalFrom       | [Float](#user-content-attrtype-float )       | Physical start value; Default value: 0                                                                                                                        |
| PhysicalTo         | [Float](#user-content-attrtype-float )       | Physical end value; Default value: 1                                                                                                                          |
| RealFade           | [Float](#user-content-attrtype-float )       | Time in seconds to move from min to max of the Channel Function; Default value: 0                                                                             |
| RealAcceleration   | [Float](#user-content-attrtype-float )       | Time in seconds to accelerate from stop to maximum velocity; Default value: 0                                                                                 |
| Wheel              | [Node](#user-content-attrtype-node )         | Optional. Link to a wheel; Starting point: Wheel Collect                                                                                                      |
| Emitter            | [Node](#user-content-attrtype-node )         | Optional. Link to an emitter in the physical description; Starting point: Emitter Collect                                                                     |
| Filter             | [Node](#user-content-attrtype-node )         | Optional. Link to a filter in the physical description; Starting point: Filter Collect                                                                        |
| ColorSpace         | [Node](#user-content-attrtype-node )         | Optional. Link to a color space in the physical description; Starting point: Physical Descriptions Collect                                                    |
| Gamut              | [Node](#user-content-attrtype-node )         | Optional. Link to a gamut in the physical description; Starting point: Gamut Collect                                                                          |
| ModeMaster         | [Node](#user-content-attrtype-node )         | Optional. Link to DMX Channel or Channel Function; Starting point DMX mode.                                                                                   |
| ModeFrom           | [DMXValue](#user-content-attrtype-dmxvalue ) | Only used together with ModeMaster; DMX start value; Default value: 0/1                                                                                       |
| ModeTo             | [DMXValue](#user-content-attrtype-dmxvalue ) | Only used together with ModeMaster; DMX end value; Default value: 0/1                                                                                         |
| DMXProfile         | [Node](#user-content-attrtype-node )         | Optional link to DMX Profile; Starting point: DMX Profile Collect                                                                                             |
| Min                | [Float](#user-content-attrtype-float )       | Minimum Physical Value that will be used for the DMX Profile. Default: Value from PhysicalFrom                                                                |
| Max                | [Float](#user-content-attrtype-float )       | Maximum Physical Value that will be used for the DMX Profile. Default: Value from PhysicalTo                                                                  |
| CustomName         | [String](#user-content-attrtype-string )     | Custom Name that can he used do adress this channel function with other command based protocols like OSC. Default: Node Name of the Channel function Example: Head_Dimmer.Dimmer.Dimmer   |
| PhotometricFrom         | [Resource](#user-content-attrtype-resource )         | Optional. IES or LDT file name without extension containing the spectral data for the start for the Active Channel Function for all Beams of the fixture. |
| PhotometricTo         | [Resource](#user-content-attrtype-resource )         | Optional. IES or LDT file name without extension containing the spectral data for the end for the Active Channel Function for all Beams of the fixture. |



</div>

Note:  
For command based control systems, you can control the fixture by sending it a string in the following style:  
`"/FIXTURE_ID/CUSTOM_NAME_CHANNELFUCTION ,f FLOAT_VALUE_PHYSICAL"`  
or   
`"/FIXTURE_ID/CUSTOM_NAME_CHANNELFUCTION/percent ,f FLOAT_VALUE_PERCENT"`

Where:  
- FIXTURE_ID is the fixture ID is the value defined for the fixture instance.
- CUSTOM_NAME_CHANNELFUCTION is the Custom Name for the ChannelFunction. Note that all "." Separators can be replaced with "/".
- FLOAT_VALUE_PHYSICAL is the physical value that the fixture should adopt. The values will be capped by the fixture by PhysicalFrom and PhysicalTo.
- FLOAT_VALUE_PERCENT is the percent value that the fixture should adopt. The values can be between 0 and 100.


As children the channel function has list of a [channel
sets](#user-content-channel-set ) and a [subchannel
sets](#user-content-sub-channel-set ).

###### Channel Set

This section defines the channel sets of the channel function (XML node
<ChannelSet>). The currently defined XML attributes of the channel set
are specified in [table 62](#user-content-table-62 ).

<div id="table-62">

#### Table 62. *Channel Set Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                                                                                                                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | The name of the channel set. Default: Empty                                                                                                                                             |
| DMXFrom            | [DMXValue](#user-content-attrtype-dmxvalue ) | Start DMX value; The end DMX value is calculated as a DMXFrom of the next channel set – 1 or the maximum value of the current channel function; Default value: 0/1                      |
| PhysicalFrom       | [Float](#user-content-attrtype-float )       | Physical start value. Default value is the PhysicalFrom from the parent channel function.                                                                                               |
| PhysicalTo         | [Float](#user-content-attrtype-float )       | Physical end value. Default value is the PhysicalTo from the parent channel function.                                                                                                   |
| WheelSlotIndex     | [Int](#user-content-attrtype-int )           | If the channel function has a link to a wheel and if the channel function attribute indicates wheel slot usage, a corresponding slot index shall be specified. The wheel slot index results from the order of slots of the wheel which is linked in the channel function. The wheel slot index is normalized to 1. Size: 4 bytes |


</div>

The channel set does not have any children.

###### SubChannel Set

This section defines the subchannel sets of the channel function (XML node
<SubChannelSet>). The currently defined XML attributes of the sub channel set
are specified in [table 63](#user-content-table-63 ).

<div id="table-63">

#### Table 63. *SubChannel Set Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                                                                                                                     |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )         | The name of the subchannel set. Default: Empty                                                                                                                                                                                                              |
| PhysicalFrom       | [Float](#user-content-attrtype-float )       | Physical start value                                                                                                                                                                                                                                         |
| PhysicalTo         | [Float](#user-content-attrtype-float )       | Physical end value                                                                                                                                                                                                                                           |
| SubPhysicalUnit    | [Node](#user-content-attrtype-node )         | Link to the subphysical unit; Starting Point: Attribute                                                                                                                                                                                                     |
| DMXProfile         | [Node](#user-content-attrtype-node )         | Optional link to the DMX Profile; Starting Point: DMX Profile Collect                                                                                                                                                                                        |


</div>

The subchannel set does not have any children.

###### PhotometricSet

This section defines the PhotometricSets of the channel function (XML node
<PhotometricSet>). The currently defined XML attributes of the PhotometricSet
are specified in [table 62](#user-content-table-62 ).

<div id="table-62">

#### Table 62. *PhotometricSet Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                                                                                                                                                                                     |
|----|----|----|
| Beam         | [Name](#user-content-attrtype-name )         | Optional link to the Beam Geometry this is for |
| DMXFrom            | [DMXValue](#user-content-attrtype-dmxvalue ) | Start DMX value; The end DMX value is calculated as a DMXFrom of the next PhotometricSet – 1 or the maximum value of the current channel function; Default value: 0/1                      |
| PhotometricFrom       | [Node](#user-content-attrtype-node)       | Photometric start value to start interpolating to. function.                                                                                               |
| PhotometricTo         | [Node](#user-content-attrtype-node)       | Photometric end value.  function.                                                                                                   |


</div>

The PhotometricSet does not have any children.


#### Relation Collect
  
##### General

This section describes the dependencies between DMX channels and channel
functions, such as multiply and override. The relation collect currently
does not have any XML attributes (XML node `<Relations>`). As children the
relation collect has a list of a [relation](#user-content-relation ).

##### Relation

This section defines the relation between the master DMX channel and the
following logical channel (XML node `<Relation>`). The currently defined
XML attributes of the relations are specified in [table 64](#user-content-table-64 ).

<div id="table-64">

#### Table 64. *Relation Attributes*

| XML Attribute Name | Value Type                               | Description                                                      |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name )     | The unique name of the relation                                  |
| Master             | [Node](#user-content-attrtype-node )     | Link to the master DMX channel; Starting point: DMX mode         |
| Follower           | [Node](#user-content-attrtype-node )     | Link to the following channel function; Starting point: DMX mode |
| Type               | [Enum](#user-content-attrtype-enum )     | Type of the relation; Values: “Multiply”, “Override”             |


</div>

The relation does not have any children. [Listing
DMX Mode With Relations](#listing-dmx-mode-with-relations) shows an example of a simple DMX mode
described in XML.

<div id="listing-dmx-mode-with-relations">

#### Listing *DMX Mode With Relations*

```
<DMXMode Name="Default" Geometry="Body">

   <DMXChannels>  
       <DMXChannel Highlight="255/1" Geometry="Pixel">  
           <LogicalChannel Attribute="Dimmer" Master="Grand">  
               <ChannelFunction Attribute="Dimmer" DMXFrom="0/1">  
                   <ChannelSet Name="closed" DMXFrom="0/1" PhysicalTo="0" />  
                   <ChannelSet DMXFrom="1/1" />  
                   <ChannelSet Name="open" DMXFrom="255/1" PhysicalFrom="1" />  
               </ChannelFunction>  
           </LogicalChannel>  
       </DMXChannel>  
       <DMXChannel DMXBreak="Overwrite" Offset="1" Default="255/1" Highlight="255/1" Geometry="Pixel">  
           <LogicalChannel Attribute="ColorAdd_R">  
               <ChannelFunction Attribute="ColorAdd_R" DMXFrom="0/1"/>  
           </LogicalChannel>  
       </DMXChannel>  
       <DMXChannel DMXBreak="Overwrite" Offset="2" Default="255/1" Highlight="255/1" Geometry="Pixel">  
           <LogicalChannel Attribute="ColorAdd_G">  
               <ChannelFunction Attribute="ColorAdd_G" DMXFrom="0/1"/>  
           </LogicalChannel>  
       </DMXChannel>  
       <DMXChannel DMXBreak="Overwrite" Offset="3" Default="255/1" Highlight="255/1" Geometry="Pixel">  
           <LogicalChannel Attribute="ColorAdd_B">  
               <ChannelFunction Attribute="ColorAdd_B" DMXFrom="0/1"/>  
           </LogicalChannel>  
       </DMXChannel>  
   </DMXChannels>  
   <Relations>  
       <Relation Name="VirtualDimmer 1" Master="Pixel_Dimmer" Follower="Pixel_ColorAdd_R.ColorAdd_R.ColorAdd_R 1" Type="Multiply" />  
       <Relation Name="VirtualDimmer 2" Master="Pixel_Dimmer" Follower="Pixel_ColorAdd_G.ColorAdd_G.ColorAdd_G 1" Type="Multiply" />  
       <Relation Name="VirtualDimmer 3" Master="Pixel_Dimmer" Follower="Pixel_ColorAdd_B.ColorAdd_B.ColorAdd_B 1" Type="Multiply" />  
   </Relations>
</DMXMode> 

```





#### Macro Collect
 
##### General

This section describes DMX sequences to be executed by the control
system. The macro collect currently does not have any XML attributes
(XML node `<FTMacros>`). As children the macro collect has a list of a
[macro](#user-content-macro ).

##### Macro
  
###### General

This section defines a DMX sequence. (XML node `<FTMacro>`). The currently
defined XML attributes of the macro are specified in [table
65](#user-content-table-65 ).

<div id="table-65">

#### Table 65. *Macro Attributes*

| XML Attribute Name | Value Type                        | Description                   |
|----|----|----|
| Name               | [Name](#user-content-attrtype-name ) | The unique name of the macro. |
| ChannelFunction    | [Node](#user-content-attrtype-node ) | Optional. Link to channel function; Starting point [DMX Mode](#user-content-dmx-mode) |


</div>

Macro children are specified in [table 66](#user-content-table-66 )

<div id="table-66">

#### Table 66. *Macro Children*

| XML node                          | Mandatory | Description                          |
|----|----|----|
| [MacroDMX](#user-content-macro-dmx ) | No        | This section defines a DMX sequence. |


</div>

###### Macro DMX

This section defines the sequence of DMX values which are sent by a
control system. (XML node `<MacroDMX>`). As children the macro DMX has a
list of [MacroDMXStep](#user-content-macro-dmx-step ).

###### Macro DMX Step

This section defines a DMX step (XML node `<MacroDMXStep>`). The currently
defined XML attributes of the macro DMX step are specified in [table
67](#user-content-table-67 ).

<div id="table-67">

#### Table 67. *Macro DMX Step Attributes*

| XML Attribute Name | Value Type                          | Description                                          |
|----|----|----|
| Duration           | [Float](#user-content-attrtype-float ) | Duration of a step; Default value: 1; Unit: seconds. |


</div>

As children the macro DMX -Step has a list of a [DMX
Value](#user-content-dmx-value ).

###### DMX Value

This section defines the value for DMX channel (XML node
<MacroDMXValue>). The currently defined XML attributes of the DMX Value
are specified in [table 68](#user-content-table-68 ).

<div id="table-68">

#### Table 68. *DMX Value Attributes*

| XML Attribute Name | Value Type                                | Description                                                                                  |
|----|----|----|
| Value              | [DMXValue](#user-content-attrtype-dmxvalue ) | Value of the DMX channel                                                                     |
| DMXChannel         | [Node](#user-content-attrtype-node )         | Link to a DMX channel. Starting node [DMX Channel collect](#user-content-dmx-channel-collect ). |


</div>

The DMX value does not have any children.

## Revision Collect
  
### General

This section defines the history of device type. Revision collect
currently does not have any XML attributes (XML node `<Revisions>`). As
children the revision collect has a list of a
[revision](#user-content-revision ).

### Revision

This section defines one revision of a the device type (XML node
`Revision>`). Revisions are optional. Every time a GDTF file is uploaded
to the database, a revision with the actual time and UserID is created
by the database. The currently defined XML attributes of the revision
are specified in [table 69](#user-content-table-69 ).

<div id="table-69">

#### Table 69. *Revision Attributes*

| XML Attribute Name | Value Type                            | Description                                                                          |
|----|----|----|
| Text               | [String](#user-content-attrtype-string ) | User-defined text for this revision; Default value: empty                            |
| Date               | [Date](#user-content-attrtype-date )     | Revision date and time                                                               |
| UserID             | [Uint](#user-content-attrtype-uint )     | UserID of the user that has uploaded the GDTF file to the database; Default value: 0 |
| ModifiedBy         | [String](#user-content-attrtype-string ) | Name of the software that modified this revision; Default value: empty               |


</div>

The revision does not have any children.


## Fixture Type Preset Collect
  
### General

This section defines fixture type specific presets. It currently does
not have any XML attributes (XML node `FTPresets>`). As children the
Fixture Preset Collect has a list of [FTPreset](#user-content-fixture-type-preset-collect )
(fixture type preset).

### Fixture Type Preset

This section has not yet been defined (XML node `<FTPreset>`).

## Supported Protocol Collect
  
### General

If the device supports one or several additional protocols, these
protocol specific information have to be specified. The supported
protocol collect currently does not have any XML attributes (XML node
`<Protocols>`). Children of supported protocol collect are specified in
[table 70](#user-content-table-70 ).

<div id="table-70">

#### Table 70. *Supported Protocol Collect Children*

| XML node                                                      | Mandatory | Amount | Description                            |
|----|----|----|----|
| [FTRDM](#user-content-rdm-section )                           | No   |  0 or 1     | Describes Fixture Type RDM information |
| [Art-Net](#user-content-art-net-section )                     | No   |  0 or 1     | Describes Art-Net information          |
| [sACN](#user-content-streaming-acn-section )                  | No   |  0 or 1     | Describes sACN information             |
| [PosiStageNet](#user-content-posi-stage-net-section )         | No   |  0 or 1     | Describes PosiStageNet information     |
| [OpenSoundControl](#user-content-open-sound-control-section ) | No   |  0 or 1     | Describes OpenSoundControl information |
| [CITP](#user-content-citp-section )                           | No   |  0 or 1     | Describes CITP information             |

</div>

### RDM Section

If the device supports the RDM protocol, this section defines the
corresponding information (XML node `<FTRDM>`). The currently defined XML
attributes of RDM are specified in [table 71](#user-content-table-71 ).

<div id="table-71">

#### Table 71. *FTRDM Attributes*

| XML Attribute Name | Value Type                      | Description            |
|----|----|----|
| ManufacturerID     | [Hex](#user-content-attrtype-hex ) | Manufacturer ESTA ID   |
| DeviceModelID      | [Hex](#user-content-attrtype-hex ) | Unique device model ID |


</div>


The ManufacturerID corresponds to the RDM "ESTA Manufacturer ID".

The DeviceModelID corresponds to the RDM "Device Model ID" in PID 0x0060 DEVICE_INFO.


As children the FTRDM has a list of `SoftwareVersionID`.

#### SoftwareVersionID
  
##### General

For each supported software version add an XML node `<SoftwareVersionID>`.
The currently defined XML attributes are specified in [table 72](#user-content-table-72 ).

<div id="table-72">

#### Table 72. *SoftwareVersionID*

| XML Attribute Name | Value Type                      | Description         |
|----|----|----|
| Value              | [Hex](#user-content-attrtype-hex ) | Software version ID |


</div>

The Value of SoftwareVersionID corresponds to the RDM "Software Version ID" in PID 0x0060 DEVICE_INFO.

As children the SoftwareVersionID has a list of `DMXPersonality`.

##### DMXPersonality

To define the supported software versions add an XML node
`<DMXPersonality>`. The currently defined XML attributes are specified in
[table 73](#user-content-table-73 ).

<div id="table-73">

#### Table 73. *DMXPersonality*

| XML Attribute Name | Value Type                        | Description                                                       |
|----|----|----|
| Value              | [Hex](#user-content-attrtype-hex )   | Hex Value of the DMXPersonality                                   |
| DMXMode            | [Name](#user-content-attrtype-name ) | Link to the DMX Mode that can be used with this software version. |


</div>

The Value of DMXPersonality corresponds to the RDM PID 0x00E0 DMX_PERSONALITY.

The DMXPersonality does not have any children.

### Art-Net Section
  
#### General

If the device supports the Art-Net protocol, this section defines the
corresponding information (XML node `<Art-Net>`).

As children the Art-Net has a list of [Maps](#user-content-map).

To define a custom mapping between Art-Net values and DMX Stream values you can add an XML node
`<Map>` as a child. The currently defined XML attributes are specified in
[table 74](#user-content-table-74 ).

By default, it is assumed that all the values are mapped 1:1, so only when you differ from that you can add a custom map.

#### Map

<div id="table-74">

#### Table 74. *Map Attributes*

| XML Attribute Name  | Value Type                            | Description                                                       |
|----|----|----|
| Key                 | [Uint](#user-content-attrtype-uint )  | Value of the Artnet value.                                        |
| Value               | [Uint](#user-content-attrtype-uint )  | Value of the DMX value.                                           |

</div>

### Streaming ACN Section
  
#### General

If the device supports the Streaming ACN protocol, this section defines the
corresponding information (XML node `<sACN>`).

As children the Streaming ACN has a list of [Maps](#user-content-map).

To define a custom mapping between Streaming ACN values and DMX Stream values you can add an XML node
`<Map>` as a child. The currently defined XML attributes are specified in
[table 74](#user-content-table-74 ).

By default, it is assumed that all the values are mapped 1:1, so only when you differ from that you can add a custom map.

### Posi Stage Net Section

This section has not yet been defined (XML node `<PosiStageNet>`).

### Open Sound Control Section

This is intentionally left empty. Future settings for custom OpenSoundControl behavior can be defined in later version. (XML node `<OpenSoundControl>`).


### CITP Section

This section has not yet been defined (XML node `<CITP>`).

## Annex A. (normative) Attribute Definitions

To describe the fixture types attributes are used. Attributes define the
function. (n) and (m) are wildcards for the enumeration of attributes
like Gobo(n) - Gobo1 and Gobo2 or VideoEffect(n)Parameter(m) -
VideoEffect1Parameter1 and VideoEffect1Parameter2. Fixture Type
Attributes without wildcards (n) or (m) are not enumerated. The
enumeration starts with 1. The currently defined Fixture Type Attributes
are specified in [table A1](#user-content-table-a1).

Note 1: The predefined Fixture Type Attributes are the preferred to use Fixture
Type Attribute. At any time user defined attributes can be introduced as well.

<div id="table-a1">

#### Table A1. *Structure of Attribute*

| Attribute                      | Description                                                                                                                                                                                                                                                                                                 
|----------------------------------|-----------------------------| 
| Dimmer                           | Controls the intensity of a fixture.                                                                                                                                                                                                                                                                      |
| Pan                              | Controls the fixture's sideward movement (horizontal axis).                                                                                                                                                                                                                                               |
| Tilt                             | Controls the fixture's upward and the downward movement (vertical axis).                                                                                                                                                                                                                                  |
| PanRotate                        | Controls the speed of the fixture's continuous pan movement (horizontal axis).                                                                                                                                                                                                                            |
| TiltRotate                       | Controls the speed of the fixture's continuous tilt movement (vertical axis).                                                                                                                                                                                                                             |
| PositionEffect                   | Selects the predefined position effects that are built into the fixture.                                                                                                                                                                                                                                  |
| PositionEffectRate               | Controls the speed of the predefined position effects that are built into the fixture.                                                                                                                                                                                                                    |
| PositionEffectFade               | Snaps or smooth fades with timing in running predefined position effects.                                                                                                                                                                                                                                 |
| XYZ\_X                           | Defines a fixture’s x-coordinate within an XYZ coordinate system.                                                                                                                                                                                                                                         |
| XYZ\_Y                           | Defines a fixture’s y-coordinate within an XYZ coordinate system.                                                                                                                                                                                                                                         |
| XYZ\_Z                           | Defines a fixture‘s z-coordinate within an XYZ coordinate system.                                                                                                                                                                                                                                         |
| Rot\_X                           | Defines rotation around X axis.                                                                                                                                                                                                                                                                           |
| Rot\_Y                           | Defines rotation around Y axis.                                                                                                                                                                                                                                                                           |
| Rot\_Z                           | Defines rotation around Z axis.                                                                                                                                                                                                                                                                           |
| Scale\_X                         | Scaling on X axis.                                                                                                                                                                                                                                                                                        |
| Scale\_Y                         | Scaling on Y axis.                                                                                                                                                                                                                                                                                        |
| Scale\_Z                         | Scaling on Y axis.                                                                                                                                                                                                                                                                                        |
| Scale\_XYZ                       | Unified scaling on all axis.                                                                                                                                                                                                                                                                              |
| Gobo(n)                          | The fixture’s gobo wheel (n). This is the main attribute of gobo wheel’s (n) wheel control. Selects gobos in gobo wheel (n). A different channel function sets the angle of the indexed position in the selected gobo or the angular speed of its continuous rotation.                                    |
| Gobo(n)SelectSpin                | Selects gobos whose rotation is continuous in gobo wheel (n) and controls the angular speed of the gobo’s spin within the same channel function. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled.                 |
| Gobo(n)SelectShake               | Selects gobos which shake in gobo wheel (n) and controls the frequency of the gobo’s shake within the same channel function.                                                                                                                                                                              |
| Gobo(n)SelectEffects             | Selects gobos which run effects in gobo wheel (n).                                                                                                                                                                                                                                                        |
| Gobo(n)WheelIndex                | Controls angle of indexed rotation of gobo wheel (n).                                                                                                                                                                                                                                                     |
| Gobo(n)WheelSpin                 | Controls the speed and direction of continuous rotation of gobo wheel (n).                                                                                                                                                                                                                                |
| Gobo(n)WheelShake                | Controls frequency of the shake of gobo wheel (n).                                                                                                                                                                                                                                                        |
| Gobo(n)WheelRandom               | Controls speed of gobo wheel´s (n) random gobo slot selection.                                                                                                                                                                                                                                            |
| Gobo(n)WheelAudio                | Controls audio-controlled functionality of gobo wheel (n).                                                                                                                                                                                                                                                |
| Gobo(n)Pos                       | Controls angle of indexed rotation of gobos in gobo wheel (n). This is the main attribute of gobo wheel’s (n) wheel slot control.                                                                                                                                                                         |
| Gobo(n)PosRotate                 | Controls the speed and direction of continuous rotation of gobos in gobo wheel (n).                                                                                                                                                                                                                       |
| Gobo(n)PosShake                  | Controls frequency of the shake of gobos in gobo wheel (n).                                                                                                                                                                                                                                               |
| AnimationWheel(n)                | This is the main attribute of the animation wheel's (n) wheel control. Selects slots in the animation wheel. A different channel function sets the angle of the indexed position in the selected slot or the angular speed of its continuous rotation. Is used for animation effects with multiple slots. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. |
| AnimationWheel(n)Audio           | Controls audio-controlled functionality of animation wheel (n).                                                                                                                                                                                                                                           |
| AnimationWheel(n)Macro           | Selects predefined effects in animation wheel (n).                                                                                                                                                                                                                                                        |
| AnimationWheel(n)Random          | Controls frequency of animation wheel (n) random slot selection.                                                                                                                                                                                                                                          |
| AnimationWheel(n)SelectEffects   | Selects slots which run effects in animation wheel (n).                                                                                                                                                                                                                                                   |
| AnimationWheel(n)SelectShake     | Selects slots which shake in animation wheel and controls the frequency of the slots shake within the same channel function.                                                                                                                                                                              |
| AnimationWheel(n)SelectSpin      | Selects slots whose rotation is continuous in animation wheel and controls the angular speed of the slot spin within the same channel function                                                                                                                                                            |
| AnimationWheel(n)Pos             | Controls angle of indexed rotation of slots in animation wheel. This is the main attribute of animation wheel (n) wheel slot control.                                                                                                                                                                     |
| AnimationWheel(n)PosRotate       | Controls the speed and direction of continuous rotation of slots in animation wheel (n).                                                                                                                                                                                                                  |
| AnimationWheel(n)PosShake        | Controls frequency of the shake of slots in animation wheel (n).                                                                                                                                                                                                                                          |
| AnimationSystem(n)               | This is the main attribute of the animation system insertion control. Controls the insertion of the fixture's animation system in the light output. Is used for animation effects where a disk is inserted into the light output.                                                                         |
| AnimationSystem(n)Ramp           | Sets frequency of animation system (n) insertion ramp.                                                                                                                                                                                                                                                    |
| AnimationSystem(n)Shake          | Sets frequency of animation system (n) insertion shake.                                                                                                                                                                                                                                                   |
| AnimationSystem(n)Audio          | Controls audio-controlled functionality of animation system (n) insertion.                                                                                                                                                                                                                                |
| AnimationSystem(n)Random         | Controls frequency of animation system (n) random insertion.                                                                                                                                                                                                                                              |
| AnimationSystem(n)Pos            | This is the main attribute of the animation system spinning control. Controls angle of indexed rotation of animation system (n) disk.                                                                                                                                                                     |
| AnimationSystem(n)PosRotate      | Controls the speed and direction of continuous rotation of animation system (n) disk.                                                                                                                                                                                                                     |
| AnimationSystem(n)PosShake       | Controls frequency of the shake of animation system (n) disk.                                                                                                                                                                                                                                             |
| AnimationSystem(n)PosRandom      | Controls random speed of animation system (n) disk.                                                                                                                                                                                                                                                       |
| AnimationSystem(n)PosAudio       | Controls audio-controlled functionality of animation system (n) disk.                                                                                                                                                                                                                                     |
| AnimationSystem(n)Macro          | Selects predefined effects in animation system (n).                                                                                                                                                                                                                                                       |
| MediaFolder(n)                   | Selects folder that contains media content.                                                                                                                                                                                                                                                               |
| MediaContent(n)                  | Selects file with media content.                                                                                                                                                                                                                                                                          |
| ModelFolder(n)                   | Selects folder that contains 3D model content. For example 3D meshes for mapping.                                                                                                                                                                                                                         |
| ModelContent(n)                  | Selects file with 3D model content.                                                                                                                                                                                                                                                                       |
| Playmode                         | Defines media playback mode.                                                                                                                                                                                                                                                                              |
| PlayBegin                        | Defines starting point of media content playback.                                                                                                                                                                                                                                                         |
| PlayEnd                          | Defines end point of media content playback.                                                                                                                                                                                                                                                              |
| PlaySpeed                        | Adjusts playback speed of media content.                                                                                                                                                                                                                                                                  |
| ColorEffects(n)                  | Selects predefined color effects built into the fixture.                                                                                                                                                                                                                                                  |
| Color(n)                         | The fixture’s color wheel (n). Selects colors in color wheel (n). This is the main attribute of color wheel’s (n) wheel control.                                                                                                                                                                          |
| Color(n)WheelIndex               | Controls angle of indexed rotation of color wheel (n)                                                                                                                                                                                                                                                     |
| Color(n)WheelSpin                | Controls the speed and direction of continuous rotation of color wheel (n).                                                                                                                                                                                                                               |
| Color(n)WheelRandom              | Controls frequency of color wheel´s (n) random color slot selection.                                                                                                                                                                                                                                      |
| Color(n)WheelAudio               | Controls audio-controlled functionality of color wheel (n).                                                                                                                                                                                                                                               |
| ColorAdd\_R                      | Controls the intensity of the fixture's red emitters for direct additive color mixing.                                                                                                                                                                                                                    |
| ColorAdd\_G                      | Controls the intensity of the fixture's green emitters for direct additive color mixing                                                                                                                                                                                                                   |
| ColorAdd\_B                      | Controls the intensity of the fixture's blue emitters for direct additive color mixing.                                                                                                                                                                                                                   |
| ColorAdd\_C                      | Controls the intensity of the fixture's cyan emitters for direct additive color mixing.                                                                                                                                                                                                                   |
| ColorAdd\_M                      | Controls the intensity of the fixture's magenta emitters for direct additive color mixing.                                                                                                                                                                                                                |
| ColorAdd\_Y                      | Controls the intensity of the fixture's yellow emitters for direct additive color mixing.                                                                                                                                                                                                                 |
| ColorAdd\_RY                     | Controls the intensity of the fixture's amber emitters for direct additive color mixing.                                                                                                                                                                                                                  |
| ColorAdd\_GY                     | Controls the intensity of the fixture's lime emitters for direct additive color mixing.                                                                                                                                                                                                                   |
| ColorAdd\_GC                     | Controls the intensity of the fixture's blue-green emitters for direct additive color mixing.                                                                                                                                                                                                             |
| ColorAdd\_BC                     | Controls the intensity of the fixture's light-blue emitters for direct additive color mixing.                                                                                                                                                                                                             |
| ColorAdd\_BM                     | Controls the intensity of the fixture's purple emitters for direct additive color mixing.                                                                                                                                                                                                                 |
| ColorAdd\_RM                     | Controls the intensity of the fixture's pink emitters for direct additive color mixing.                                                                                                                                                                                                                   |
| ColorAdd\_W                      | Controls the intensity of the fixture's white emitters for direct additive color mixing.                                                                                                                                                                                                                  |
| ColorAdd\_WW                     | Controls the intensity of the fixture's warm white emitters for direct additive color mixing.                                                                                                                                                                                                             |
| ColorAdd\_CW                     | Controls the intensity of the fixture's cool white emitters for direct additive color mixing.                                                                                                                                                                                                             |
| ColorAdd\_UV                     | Controls the intensity of the fixture's UV emitters for direct additive color mixing.                                                                                                                                                                                                                     |
| ColorSub\_R                      | Controls the insertion of the fixture's red filter flag for direct subtractive color mixing.                                                                                                                                                                                                              |
| ColorSub\_G                      | Controls the insertion of the fixture's green filter flag for direct subtractive color mixing.                                                                                                                                                                                                            |
| ColorSub\_B                      | Controls the insertion of the fixture's blue filter flag for direct subtractive color mixing.                                                                                                                                                                                                             |
| ColorSub\_C                      | Controls the insertion of the fixture's cyan filter flag for direct subtractive color mixing.                                                                                                                                                                                                             |
| ColorSub\_M                      | Controls the insertion of the fixture's magenta filter flag for direct subtractive color mixing.                                                                                                                                                                                                          |
| ColorSub\_Y                      | Controls the insertion of the fixture's yellow filter flag for direct subtractive color mixing.                                                                                                                                                                                                           |
| ColorMacro(n)                    | Selects predefined colors that are programmed in the fixture's firmware.                                                                                                                                                                                                                                  |
| ColorMacro(n)Rate                | Controls the time between Color Macro steps.                                                                                                                                                                                                                                                              |
| CTO                              | Controls the fixture's "Correct to orange" wheel or mixing system.                                                                                                                                                                                                                                        |
| CTC                              | Controls the fixture's "Correct to color" wheel or mixing system.                                                                                                                                                                                                                                         |
| CTB                              | Controls the fixture's "Correct to blue" wheel or mixing system.                                                                                                                                                                                                                                          |
| Tint                             | Controls the fixture's "Correct green to magenta" wheel or mixing system.                                                                                                                                                                                                                                 |
| HSB\_Hue                         | Controls the fixture's color attribute regarding the hue.                                                                                                                                                                                                                                                 |
| HSB\_Saturation                  | Controls the fixture's color attribute regarding the saturation.                                                                                                                                                                                                                                          |
| HSB\_Brightness                  | Controls the fixture's color attribute regarding the brightness.                                                                                                                                                                                                                                          |
| HSB\_Quality                     | Controls the fixture's color attribute regarding the quality.                                                                                                                                                                                                                                             |
| CIE\_X                           | Controls the fixture's CIE 1931 color attribute regarding the chromaticity x.                                                                                                                                                                                                                             |
| CIE\_Y                           | Controls the fixture's CIE 1931 color attribute regarding the chromaticity y.                                                                                                                                                                                                                             |
| CIE\_Brightness                  | Controls the fixture's CIE 1931 color attribute regarding the brightness (Y).                                                                                                                                                                                                                             |
| ColorRGB\_Red                    | Controls the fixture's red attribute for indirect RGB color mixing.                                                                                                                                                                                                                                       |
| ColorRGB\_Green                  | Controls the fixture's green attribute for indirect RGB color mixing.                                                                                                                                                                                                                                     |
| ColorRGB\_Blue                   | Controls the fixture's blue attribute for indirect RGB color mixing.                                                                                                                                                                                                                                      |
| ColorRGB\_Cyan                   | Controls the fixture's cyan attribute for indirect CMY color mixing.                                                                                                                                                                                                                                      |
| ColorRGB\_Magenta                | Controls the fixture's magenta attribute for indirect CMY color mixing.                                                                                                                                                                                                                                   |
| ColorRGB\_Yellow                 | Controls the fixture's yellow attribute for indirect CMY color mixing.                                                                                                                                                                                                                                    |
| ColorRGB\_Quality                | Controls the fixture's quality attribute for indirect color mixing.                                                                                                                                                                                                                                       |
| VideoBoost\_R                    | Adjusts color boost red of content.                                                                                                                                                                                                                                                                       |
| VideoBoost\_G                    | Adjusts color boost green of content.                                                                                                                                                                                                                                                                     |
| VideoBoost\_B                    | Adjusts color boost blue of content.                                                                                                                                                                                                                                                                      |
| VideoHueShift                    | Adjusts color hue shift of content.                                                                                                                                                                                                                                                                       |
| VideoSaturation                  | Adjusts saturation of content.                                                                                                                                                                                                                                                                            |
| VideoBrightness                  | Adjusts brightness of content.                                                                                                                                                                                                                                                                            |
| VideoContrast                    | Adjusts contrast of content.                                                                                                                                                                                                                                                                              |
| VideoKeyColor\_R                 | Adjusts red color for color keying.                                                                                                                                                                                                                                                                       |
| VideoKeyColor\_G                 | Adjusts green color for color keying.                                                                                                                                                                                                                                                                     |
| VideoKeyColor\_B                 | Adjusts blue color for color keying.                                                                                                                                                                                                                                                                      |
| VideoKeyIntensity                | Adjusts intensity of color keying.                                                                                                                                                                                                                                                                        |
| VideoKeyTolerance                | Adjusts tolerance of color keying.                                                                                                                                                                                                                                                                        |
| StrobeDuration                   | Controls the length of a strobe flash.                                                                                                                                                                                                                                                                    |
| StrobeRate                       | Controls the time between strobe flashes.                                                                                                                                                                                                                                                                 |
| StrobeFrequency                  | Controls the frequency of strobe flashes.                                                                                                                                                                                                                                                                 |
| StrobeModeShutter                | Strobe mode shutter. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                         |
| StrobeModeStrobe                 | Strobe mode strobe. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                          |
| StrobeModePulse                  | Strobe mode pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                           |
| StrobeModePulseOpen              | Strobe mode opening pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                   |
| StrobeModePulseClose             | Strobe mode closing pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                   |
| StrobeModeRandom                 | Strobe mode random strobe. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                   |
| StrobeModeRandomPulse            | Strobe mode random pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                                    |
| StrobeModeRandomPulseOpen        | Strobe mode random opening pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                            |
| StrobeModeRandomPulseClose       | Strobe mode random closing pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                            |
| StrobeModeEffect                 | Strobe mode random shutter effect feature. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe.                                                                                                                                                                   |
| Shutter(n)                       | Controls the fixture´s mechanical or electronical shutter feature.                                                                                                                                                                                                                                        |
| Shutter(n)Strobe                 | Controls the frequency of the fixture´s mechanical or electronical strobe shutter feature.                                                                                                                                                                                                                |
| Shutter(n)StrobePulse            | Controls the frequency of the fixture´s mechanical or electronical pulse shutter feature.                                                                                                                                                                                                                 |
| Shutter(n)StrobePulseClose       | Controls the frequency of the fixture´s mechanical or electronical closing pulse shutter feature. The pulse is described by a ramp function.                                                                                                                                                              |
| Shutter(n)StrobePulseOpen        | Controls the frequency of the fixture´s mechanical or electronical opening pulse shutter feature. The pulse is described by a ramp function.                                                                                                                                                              |
| Shutter(n)StrobeRandom           | Controls the frequency of the fixture´s mechanical or electronical random strobe shutter feature.                                                                                                                                                                                                         |
| Shutter(n)StrobeRandomPulse      | Controls the frequency of the fixture´s mechanical or electronical random pulse shutter feature.                                                                                                                                                                                                          |
| Shutter(n)StrobeRandomPulseClose | Controls the frequency of the fixture´s mechanical or electronical random closing pulse shutter feature. The pulse is described by a ramp function.                                                                                                                                                       |
| Shutter(n)StrobeRandomPulseOpen  | Controls the frequency of the fixture´s mechanical or electronical random opening pulse shutter feature. The pulse is described by a ramp function.                                                                                                                                                       |
| Shutter(n)StrobeEffect           | Controls the frequency of the fixture´s mechanical or electronical shutter effect feature.                                                                                                                                                                                                                |
| Iris                             | Controls the diameter of the fixture's beam.                                                                                                                                                                                                                                                              |
| IrisStrobe                       | Sets frequency of the iris's strobe feature.                                                                                                                                                                                                                                                              |
| IrisStrobeRandom                 | Sets frequency of the iris's random movement.                                                                                                                                                                                                                                                             |
| IrisPulseClose                   | Sets frequency of iris's closing pulse.                                                                                                                                                                                                                                                                   |
| IrisPulseOpen                    | Sets frequency of iris's opening pulse.                                                                                                                                                                                                                                                                   |
| IrisRandomPulseClose             | Sets frequency of iris's random closing pulse.                                                                                                                                                                                                                                                            |
| IrisRandomPulseOpen              | Sets frequency of iris's random opening pulse.                                                                                                                                                                                                                                                            |
| Frost(n)                         | The ability to soften the fixture's spot light with a frosted lens.                                                                                                                                                                                                                                       |
| Frost(n)PulseOpen                | Sets frequency of frost's opening pulse                                                                                                                                                                                                                                                                   |
| Frost(n)PulseClose               | Sets frequency of frost's closing pulse.                                                                                                                                                                                                                                                                  |
| Frost(n)Ramp                     | Sets frequency of frost's ramp.                                                                                                                                                                                                                                                                           |
| Prism(n)                         | The fixture’s prism wheel (n). Selects prisms in prism wheel (n). A different channel function sets the angle of the indexed position in the selected prism or the angular speed of its continuous rotation. This is the main attribute of prism wheel’s (n) wheel control.                               |
| Prism(n)SelectSpin               | Selects prisms whose rotation is continuous in prism wheel (n) and controls the angular speed of the prism’s spin within the same channel function.                                                                                                                                                       |
| Prism(n)Macro                    | Macro functions of prism wheel (n).                                                                                                                                                                                                                                                                       |
| Prism(n)Pos                      | Controls angle of indexed rotation of prisms in prism wheel (n). This is the main attribute of prism wheel’s 1 wheel slot control.                                                                                                                                                                        |
| Prism(n)PosRotate                | Controls the speed and direction of continuous rotation of prisms in prism wheel (n).                                                                                                                                                                                                                     |
| Effects(n)                       | Generically predefined macros and effects of a fixture.                                                                                                                                                                                                                                                   |
| Effects(n)Rate                   | Frequency of running effects.                                                                                                                                                                                                                                                                             |
| Effects(n)Fade                   | Snapping or smooth look of running effects.                                                                                                                                                                                                                                                               |
| Effects(n)Adjust(m)              | Controls parameter (m) of effect (n)                                                                                                                                                                                                                                                                      |
| Effects(n)Pos                    | Controls angle of indexed rotation of slot/effect in effect wheel/macro (n). This is the main attribute of effect wheel/macro (n) slot/effect control.                                                                                                                                                    |
| Effects(n)PosRotate              | Controls speed and direction of slot/effect in effect wheel (n).                                                                                                                                                                                                                                          |
| EffectsSync                      | Sets offset between running effects and effects 2.                                                                                                                                                                                                                                                        |
| BeamShaper                       | Activates fixture's beam shaper.                                                                                                                                                                                                                                                                          |
| BeamShaperMacro                  | Predefined presets for fixture's beam shaper positions.                                                                                                                                                                                                                                                   |
| BeamShaperPos                    | Indexing of fixture's beam shaper.                                                                                                                                                                                                                                                                        |
| BeamShaperPosRotate              | Continuous rotation of fixture's beam shaper.                                                                                                                                                                                                                                                             |
| Zoom                             | Controls the spread of the fixture's beam/spot.                                                                                                                                                                                                                                                           |
| ZoomModeSpot                     | Selects spot mode of zoom.                                                                                                                                                                                                                                                                                |
| ZoomModeBeam                     | Selects beam mode of zoom.                                                                                                                                                                                                                                                                                |
| DigitalZoom                      | Controls the image size within the defined projection. Used on digital projection based devices                                                                                                                                                                                                           |
| Focus(n)                         | Controls the sharpness of the fixture's spot light. Can blur or sharpen the edge of the spot.                                                                                                                                                                                                             |
| Focus(n)Adjust                   | Autofocuses functionality using presets.                                                                                                                                                                                                                                                                  |
| Focus(n)Distance                 | Autofocuses functionality using distance.                                                                                                                                                                                                                                                                 |
| Control(n)                       | Controls the channel of a fixture.                                                                                                                                                                                                                                                                        |
| DimmerMode                       | Selects different modes of intensity.                                                                                                                                                                                                                                                                     |
| DimmerCurve                      | Selects different dimmer curves of the fixture.                                                                                                                                                                                                                                                           |
| BlackoutMode                     | Close the light output under certain conditions (movement correction, gobo movement, etc.).                                                                                                                                                                                                               |
| LEDFrequency                     | Controls LED frequency.                                                                                                                                                                                                                                                                                   |
| LEDZoneMode                      | Changes zones of LEDs.                                                                                                                                                                                                                                                                                    |
| PixelMode                        | Controls behavior of LED pixels.                                                                                                                                                                                                                                                                          |
| PanMode                          | Selects fixture's pan mode. Selects between a limited pan range (e.g. -270 to 270) or a continuous pan range.                                                                                                                                                                                             |
| TiltMode                         | Selects fixture's pan mode. Selects between a limited tilt range (e.g. -130 to 130) or a continuous tilt range.                                                                                                                                                                                           |
| PanTiltMode                      | Selects fixture's pan/tilt mode. Selects between a limited pan/tilt range or a continuous pan/tilt range.                                                                                                                                                                                                 |
| PositionModes                    | Selects the fixture's position mode.                                                                                                                                                                                                                                                                      |
| Gobo(n)WheelMode                 | Changes control between selecting, indexing, and rotating the gobos of gobo wheel (n).                                                                                                                                                                                                                    |
| GoboWheelShortcutMode            | Defines whether the gobo wheel takes the shortest distance between two positions.                                                                                                                                                                                                                         |
| AnimationWheel(n)Mode            | Changes control between selecting, indexing, and rotating the slots of animation wheel (n).                                                                                                                                                                                                               |
| AnimationWheelShortcutMode       | Defines whether the animation wheel takes the shortest distance between two positions.                                                                                                                                                                                                                    |
| Color(n)Mode                     | Changes control between selecting, continuous selection, half selection, random selection, color spinning, etc. in colors of color wheel (n).                                                                                                                                                             |
| ColorWheelShortcutMode           | Defines whether the color wheel takes the shortest distance between two colors.                                                                                                                                                                                                                           |
| CyanMode                         | Controls how Cyan is used within the fixture's cyan CMY-mixing feature.                                                                                                                                                                                                                                   |
| MagentaMode                      | Controls how Magenta is used within the fixture's magenta CMY-mixing.                                                                                                                                                                                                                                     |
| YellowMode                       | Controls how Yellow is used within the fixture's yellow CMY-mixing feature.                                                                                                                                                                                                                               |
| ColorMixMode                     | Changes control between selecting continuous selection, half selection, random selection, color spinning, etc. in color mixing.                                                                                                                                                                           |
| ChromaticMode                    | Selects chromatic behavior of the device.                                                                                                                                                                                                                                                                 |
| ColorCalibrationMode             | Sets calibration mode (for example on/off).                                                                                                                                                                                                                                                               |
| ColorConsistency                 | Controls consistent behavior of color.                                                                                                                                                                                                                                                                    |
| ColorControl                     | Controls special color related functions.                                                                                                                                                                                                                                                                 |
| ColorModelMode                   | Controls color model (CMY/RGB/HSV...).                                                                                                                                                                                                                                                                    |
| ColorSettingsReset               | Resets settings of color control channel.                                                                                                                                                                                                                                                                 |
| ColorUniformity                  | Controls behavior of color uniformity.                                                                                                                                                                                                                                                                    |
| CRIMode                          | Controls CRI settings of output.                                                                                                                                                                                                                                                                          |
| CustomColor                      | Custom color related functions (save, recall..).                                                                                                                                                                                                                                                          |
| UVStability                      | Settings for UV stability color behavior.                                                                                                                                                                                                                                                                 |
| WavelengthCorrection             | Settings for Wavelength correction of colors.                                                                                                                                                                                                                                                             |
| WhiteCount                       | Controls if White LED is proportionally added to RGB.                                                                                                                                                                                                                                                     |
| StrobeMode                       | Changes strobe style - strobe, pulse, random strobe, etc. - of the shutter attribute.                                                                                                                                                                                                                     |
| ZoomMode                         | Changes modes of the fixture´s zoom.                                                                                                                                                                                                                                                                      |
| FocusMode                        | Changes modes of the fixture’s focus - manual or auto- focus.                                                                                                                                                                                                                                             |
| IrisMode                         | Changes modes of the fixture’s iris - linear, strobe, pulse.                                                                                                                                                                                                                                              |
| FanMode                          | Controls fan (n) mode.                                                                                                                                                                                                                                                                                    |
| FollowSpotMode                   | Selects follow spot control mode.                                                                                                                                                                                                                                                                         |
| BeamEffectIndexRotateMode        | Changes mode to control either index or rotation of the beam effects.                                                                                                                                                                                                                                     |
| IntensityMSpeed                  | Movement speed of the fixture's intensity.                                                                                                                                                                                                                                                                |
| PositionMSpeed                   | Movement speed of the fixture's pan/tilt.                                                                                                                                                                                                                                                                 |
| ColorMixMSpeed                   | Movement speed of the fixture's ColorMix presets.                                                                                                                                                                                                                                                         |
| ColorWheelSelectMSpeed           | Movement speed of the fixture's color wheel.                                                                                                                                                                                                                                                              |
| GoboWheel(n)MSpeed               | Movement speed of the fixture's gobo wheel (n).                                                                                                                                                                                                                                                           |
| IrisMSpeed                       | Movement speed of the fixture's iris.                                                                                                                                                                                                                                                                     |
| Prism(n)MSpeed                   | Movement speed of the fixture's prism wheel (n).                                                                                                                                                                                                                                                          |
| FocusMSpeed                      | Movement speed of the fixture's focus.                                                                                                                                                                                                                                                                    |
| Frost(n)MSpeed                   | Movement speed of the fixture's frost (n).                                                                                                                                                                                                                                                                |
| ZoomMSpeed                       | Movement speed of the fixture's zoom.                                                                                                                                                                                                                                                                     |
| FrameMSpeed                      | Movement speed of the fixture's shapers.                                                                                                                                                                                                                                                                  |
| GlobalMSpeed                     | General speed of fixture's features.                                                                                                                                                                                                                                                                      |
| ReflectorAdjust                  | Movement speed of the fixture's frost.                                                                                                                                                                                                                                                                    |
| FixtureGlobalReset               | Generally resets the entire fixture.                                                                                                                                                                                                                                                                      |
| DimmerReset                      | Resets the fixture's dimmer.                                                                                                                                                                                                                                                                              |
| ShutterReset                     | Resets the fixture's shutter.                                                                                                                                                                                                                                                                             |
| BeamReset                        | Resets the fixture's beam features.                                                                                                                                                                                                                                                                       |
| ColorMixReset                    | Resets the fixture's color mixing system.                                                                                                                                                                                                                                                                 |
| ColorWheelReset                  | Resets the fixture's color wheel.                                                                                                                                                                                                                                                                         |
| FocusReset                       | Resets the fixture's focus.                                                                                                                                                                                                                                                                               |
| FrameReset                       | Resets the fixture's shapers.                                                                                                                                                                                                                                                                             |
| GoboWheelReset                   | Resets the fixture's gobo wheel.                                                                                                                                                                                                                                                                          |
| IntensityReset                   | Resets the fixture's intensity.                                                                                                                                                                                                                                                                           |
| IrisReset                        | Resets the fixture's iris.                                                                                                                                                                                                                                                                                |
| PositionReset                    | Resets the fixture's pan/tilt.                                                                                                                                                                                                                                                                            |
| PanReset                         | Resets the fixture's pan.                                                                                                                                                                                                                                                                                 |
| TiltReset                        | Resets the fixture's tilt.                                                                                                                                                                                                                                                                                |
| ZoomReset                        | Resets the fixture's zoom.                                                                                                                                                                                                                                                                                |
| CTBReset                         | Resets the fixture's CTB.                                                                                                                                                                                                                                                                                 |
| CTOReset                         | Resets the fixture's CTO.                                                                                                                                                                                                                                                                                 |
| CTCReset                         | Resets the fixture's CTC.                                                                                                                                                                                                                                                                                 |
| AnimationSystemReset             | Resets the fixture's animation system features.                                                                                                                                                                                                                                                           |
| FixtureCalibrationReset          | Resets the fixture's calibration.                                                                                                                                                                                                                                                                         |
| Function                         | Generally controls features of the fixture.                                                                                                                                                                                                                                                               |
| LampControl                      | Controls the fixture's lamp on/lamp off feature.                                                                                                                                                                                                                                                          |
| DisplayIntensity                 | Adjusts intensity of display                                                                                                                                                                                                                                                                              |
| DMXInput                         | Selects DMX Input                                                                                                                                                                                                                                                                                         |
| NoFeature                        | Ranges without a functionality.                                                                                                                                                                                                                                                                           |
| Dummy                            | Ranges without a functionality.                                                                                                                                                                                                                                                                           |
| Blower(n)                        | Fog or hazer‘s blower feature.                                                                                                                                                                                                                                                                            |
| Fan(n)                           | Fog or hazer's Fan feature.                                                                                                                                                                                                                                                                               |
| Fog(n)                           | Fog or hazer's Fog feature.                                                                                                                                                                                                                                                                               |
| Haze(n)                          | Fog or hazer's Haze feature.                                                                                                                                                                                                                                                                              |
| LampPowerMode                    | Controls the energy consumption of the lamp.                                                                                                                                                                                                                                                              |
| Fans                             | Controls a fixture or device fan.                                                                                                                                                                                                                                                                         |
| Blade(n)A                        | 1 of 2 shutters that shape the top/right/bottom/left of the beam.                                                                                                                                                                                                                                         |
| Blade(n)B                        | 2 of 2 shutters that shape the top/right/bottom/left of the beam.                                                                                                                                                                                                                                         |
| Blade(n)Rot                      | Rotates position of blade(n).                                                                                                                                                                                                                                                                             |
| ShaperRot                        | Rotates position of blade assembly.                                                                                                                                                                                                                                                                       |
| ShaperMacros                     | Predefined presets for shaper positions.                                                                                                                                                                                                                                                                  |
| ShaperMacrosSpeed                | Speed of predefined effects on shapers.                                                                                                                                                                                                                                                                   |
| BladeSoft(n)A                    | 1 of 2 soft edge blades that shape the top/right/bottom/left of the beam.                                                                                                                                                                                                                                 |
| BladeSoft(n)B                    | 2 of 2 soft edge blades that shape the top/right/bottom/left of the beam.                                                                                                                                                                                                                                 |
| KeyStone(n)A                     | 1 of 2 corners that shape the top/right/bottom/left of the beam.                                                                                                                                                                                                                                          |
| KeyStone(n)B                     | 2 of 2 corners that shape the top/right/bottom/left of the beam.                                                                                                                                                                                                                                          |
| Video                            | Controls video features.                                                                                                                                                                                                                                                                                  |
| VideoEffect(n)Type               | Selects dedicated effects which are used for media.                                                                                                                                                                                                                                                       |
| VideoEffect(n)Parameter(m)       | Controls parameter (m) of VideoEffect(n)Type.                                                                                                                                                                                                                                                             |
| VideoCamera(n)                   | Selects the video camera(n).                                                                                                                                                                                                                                                                              |
| VideoSoundVolume(n)              | Adjusts sound volume.                                                                                                                                                                                                                                                                                     |
| VideoBlendMode                   | Defines mode of video blending.                                                                                                                                                                                                                                                                           |
| InputSource                      | Defines media input source e.g. a camera input.                                                                                                                                                                                                                                                           |
| FieldOfView                      | Defines field of view.                                                                                                                                                                                                                                                                                    |

</div>


## Annex B (normative) Attribute Listing

(n) and (m) are wildcards for enumeration of attributes e.g., Gobo(n) -
Gobo1 and Gobo2 or VideoEffect(n)Parameter(m) - VideoEffect1Parameter1
and VideoEffect1Parameter2. Attributes without the wildcards (n) or (m)
are not enumerated. The enumeration starts with 1. Attributes names are
considered as normalized. The upper and lower case of attribute names is
not taken into account.

```

<?xml version="1.0"?>
<AttributeDefinitions>
  <ActivationGroups>
    <ActivationGroup
      Name="PanTilt"/>
    <ActivationGroup
      Name="XYZ"/>
    <ActivationGroup
      Name="Rot_XYZ"/>
    <ActivationGroup
      Name="Scale_XYZ"/>
    <ActivationGroup
      Name="ColorRGB"/>
    <ActivationGroup
      Name="ColorHSB"/>
    <ActivationGroup
      Name="ColorCIE"/>
    <ActivationGroup
      Name="ColorIndirect"/>
    <ActivationGroup
      Name="Gobo(n)"/>
    <ActivationGroup
      Name="Gobo(n)Pos"/>
    <ActivationGroup
      Name="AnimationWheel(n)"/>
    <ActivationGroup
      Name="AnimationWheel(n)Pos"/>
    <ActivationGroup
      Name="AnimationSystem(n)"/>
    <ActivationGroup
      Name="AnimationSystem(n)Pos"/>
    <ActivationGroup
      Name="Prism"/>
    <ActivationGroup
      Name="BeamShaper"/>
    <ActivationGroup
      Name="Shaper"/>
  </ActivationGroups>
  <FeatureGroups>
    <FeatureGroup
      Name="Dimmer">
      <Feature
        Name="Dimmer"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Position">
      <Feature
        Name="PanTilt"/>
      <Feature
        Name="XYZ"/>
      <Feature
        Name="Rotation"/>
      <Feature
        Name="Scale"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Gobo">
      <Feature
        Name="Gobo"/>
      <Feature
        Name="Media"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Color">
      <Feature
        Name="Color"/>
      <Feature
        Name="RGB"/>
      <Feature
        Name="HSB"/>
      <Feature
        Name="CIE"/>
      <Feature
        Name="Indirect"/>
      <Feature
        Name="ColorCorrection"/>
      <Feature
        Name="HSBC_Shift"/>
      <Feature
        Name="ColorKey"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Beam">
      <Feature
        Name="Beam"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Focus">
      <Feature
        Name="Focus"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Control">
      <Feature
        Name="Control"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Shapers">
      <Feature
        Name="Shapers"/>
    </FeatureGroup>
    <FeatureGroup
      Name="Video">
      <Feature
        Name="Video"/>
    </FeatureGroup>
  </FeatureGroups>
  <Attributes>
    <Attribute
      Name="Dimmer"
      Pretty="Dim"
      Feature="Dimmer.Dimmer"
      Definition="Controls the intensity of a fixture."
      Explanation="Gradual (fading) change of intensity or brightness or in some cases even opacity shall be controlled with this attribute. Physical values go from 0 = no output, to 1 = full output. If a software makes use of an overall intensity control such as a grandmaster, it is important for the application to understand which attribute to change. In that scenario the dimmer attribute shall be the main intensity, brightness or opacity change."
      Label="Dimmer"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Pan"
      Pretty="P"
      ActivationGroup="PanTilt"
      Feature="Position.PanTilt"
      PhysicalUnit="Angle"
      Definition="Controls the fixture's sideward movement (horizontal axis)."
      Explanation="PAN is one part of the movement that usually controls the horizontal movement. In regards to the fixture the Attribute of PAN will control the overall rotation around the basement of the fixture. If the fixture is mounted hanging it usually moves around the Z-axis. But PAN can also be used for virtual control of media server layers or other objects in virtual 3D environments. Usually PAN is used in relation with TILT."
      Label="Pan"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Tilt"
      Pretty="T"
      ActivationGroup="PanTilt"
      Feature="Position.PanTilt"
      PhysicalUnit="Angle"
      Definition="Controls the fixture's upward and the downward movement (vertical axis)."
      Explanation="TILT is one part of the movement that usually controls the vertical movement .In regards to the fixture the Attribute of TILT will control the overall rotation around the yoke-axis of the fixture. If the fixture is mounted hanging it usually moves around the x-axis or y-axis, depending on the PAN. TILT can also be used for virtual control of media server layers or other objects in virtual 3D environments. Usually TILT is used in relation with PAN."
      Label="Tilt"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PanRotate"
      Pretty="P Rotate"
      Feature="Position.PanTilt"
      PhysicalUnit="AngularSpeed"
      Definition="Controls the speed of the fixture's continuous pan movement (horizontal axis)."
      Explanation="For fixtures with the ability to have a continuous pan rotation, the “Pan Rotate” control defines how fast (speed) a fixture can rotate about the pan axis. Usually, the horizontal axis."
      Label="Pan Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="TiltRotate"
      Pretty="T Rotate"
      Feature="Position.PanTilt"
      PhysicalUnit="AngularSpeed"
      Definition="Controls the speed of the fixture's continuous tilt movement (vertical axis)."
      Explanation="For fixtures with the ability to have a continuous tilt rotation, the “Tilt Rotate” control defines how fast (speed) a fixture can rotate about the tilt axis. Usually, the vertical axis."
      Label="Tilt Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PositionEffect"
      Pretty="Pos FX"
      Feature="Position.PanTilt"
      Definition="Selects the predefined position effects that are built into the fixture."
      Explanation="Effects which are built into the fixture, are based on movement and are of manufacturer specific nature so they cannot really be visualized are described with this attribute."
      Label="Position Effect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PositionEffectRate"
      Pretty="Pos FX Rate"
      Feature="Position.PanTilt"
      Definition="Controls the speed of the predefined position effects that are built into the fixture."
      Explanation="Adjusting speed of some predefined movement effects is described with this attribute."
      Label="Position Effect Rate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PositionEffectFade"
      Pretty="Pos FX Fade"
      Feature="Position.PanTilt"
      Definition="Snaps or smooth fades with timing in running predefined position effects."
      Explanation="Use this attribute to describe functions that are adjusting fading or snapping behavior of some movement effects."
      Label="Position Effect Fade"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="XYZ_X"
      Pretty="X"
      ActivationGroup="XYZ"
      Feature="Position.XYZ"
      PhysicalUnit="Length"
      Definition="Defines a fixture’s x-coordinate within an XYZ coordinate system."
      Explanation="Devices that can move straight in X-direction in space (opposite to pan or tilt circular movement) describe the movement with this attribute. A typical usage is left/right movement of a video-layer in space."
      Label="XYZ X"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="XYZ_Y"
      Pretty="Y"
      ActivationGroup="XYZ"
      Feature="Position.XYZ"
      PhysicalUnit="Length"
      Definition="Defines a fixture’s y-coordinate within an XYZ coordinate system."
      Explanation="Devices that can move straight in Y-direction in space (opposite to pan or tilt circular movement) describe the movement with this attribute. A typical usage is forward/backward movement of a video-layer in space."
      Label="XYZ Y"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="XYZ_Z"
      Pretty="Z"
      ActivationGroup="XYZ"
      Feature="Position.XYZ"
      PhysicalUnit="Length"
      Definition="Defines a fixture‘s z-coordinate within an XYZ coordinate system."
      Explanation="Devices that can move straight in Z-direction in space (opposite to distance of a pan/tilt device) describe the movement with this attribute. A typical usage is up/down movement of a video-layer in space."
      Label="XYZ Z"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Rot_X"
      Pretty="Rot X"
      ActivationGroup="Rot_XYZ"
      Feature="Position.Rotation"
      PhysicalUnit="Angle"
      Definition="Defines rotation around X axis."
      Explanation="Devices that can be rotated around the X-axis in space use this attribute. A typical usage is horizontal rotation of a video-layer in space (pitch axis)."
      Label="Rot X"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Rot_Y"
      Pretty="Rot Y"
      ActivationGroup="Rot_XYZ"
      Feature="Position.Rotation"
      PhysicalUnit="Angle"
      Definition="Defines rotation around Y axis."
      Explanation="Devices that can be rotated around the Y-axis in space use this attribute. A typical usage is rolling of a video-layer in space (roll axis)."
      Label="Rot Y"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Rot_Z"
      Pretty="Rot Z"
      ActivationGroup="Rot_XYZ"
      Feature="Position.Rotation"
      PhysicalUnit="Angle"
      Definition="Defines rotation around Z axis."
      Explanation="Devices that can be rotated around the Z-axis in space use this attribute. A typical usage is vertical rotation of a video-layer in space (yaw axis)."
      Label="Rot Z"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Scale_X"
      Pretty="Scale X"
      ActivationGroup="Scale_XYZ"
      Feature="Position.Scale"
      PhysicalUnit="Percent"
      Definition="Scaling on X axis."
      Explanation="Use this attribute to describe a function that scales the percentage of movement on an X axis."
      Label="Scale X"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Scale_Y"
      Pretty="Scale Y"
      ActivationGroup="Scale_XYZ"
      Feature="Position.Scale"
      PhysicalUnit="Percent"
      Definition="Scaling on Y axis."
      Explanation="Use this attribute to describe a function that scales the percentage of movement on an Y axis."
      Label="Scale Y"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Scale_Z"
      Pretty="Scale Z"
      ActivationGroup="Scale_XYZ"
      Feature="Position.Scale"
      PhysicalUnit="Percent"
      Definition="Scaling on Y axis."
      Explanation="Use this attribute to describe a function that scales the percentage of movement on an Z axis."
      Label="Scale Z"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Scale_XYZ"
      Pretty="Scale XYZ"
      ActivationGroup="Scale_XYZ"
      Feature="Position.Scale"
      PhysicalUnit="Percent"
      Definition="Unified scaling on all axis."
      Explanation="Use this attribute to describe a function that scales the percentage of movement on all X, Y and Z axes."
      Label="Scale XYZ"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Gobo(n)"
      Pretty="G(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      Definition="The fixture’s gobo wheel (n). This is the main attribute of gobo wheel’s (n) wheel control. Selects gobos in gobo wheel (n). A different channel function sets the angle of the indexed position in the selected gobo or the angular speed of its continuous rotation."
      Explanation="Use this attribute to select gobo in a gobo wheel for fixtures that provide gobo selection on one channel and gobo rotation/indexing on another channel(s). The actual gobo selection way - continuous or steps (when continuous, you can freely index the gobo wheel) is defined via physical properties of channel sets of this attribute. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Gobo"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Gobo(n)SelectSpin"
      Pretty="Select Spin"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="AngularSpeed"
      Definition="Selects gobos whose rotation is continuous in gobo wheel (n) and controls the angular speed of the gobo’s spin within the same channel function. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Explanation="Use this attribute to control selection and spin speed of gobos, with continuous rotation in gobo wheel, within the same channel function. When there is more than one gobo wheel a wild card (numerical identifier (n)) will be automatically added to indicate which wheel is being controlled. When using this Gobo(n)SelectSpin as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)SelectSpin as the Logical Channel attribute."
      Label="Gobo Select Spin"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Gobo(n)SelectShake"
      Pretty="Select Shake"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Definition="Selects gobos which shake in gobo wheel (n) and controls the frequency of the gobo’s shake within the same channel function."
      Explanation="Use this attribute to control selection and shake speed of gobos, with gobo shake effect in gobo wheel, within the same channel function When using this Gobo(n)SelectShake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)SelectShake as the Logical Channel attribute."
      Label="Gobo Select Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <SubPhysicalUnit
      Type="Amplitude"
      PhysicalUnit="Percent"
      PhysicalFrom="20"
      PhysicalTo="20"
      Description="This is the amount of shake as a percentage of the image size and defines the peak amplitude of the shake"/>
    <Attribute
      Name="Gobo(n)SelectEffects"
      Pretty="Select Effects"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      Definition="Selects gobos which run effects in gobo wheel (n)."
      Explanation="Use this attribute for manufacturer defined fixture specific effects on a gobo wheel. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)SelectEffects as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)SelectEffects as the Logical Channel attribute."
      Label="Gobo Select Effects"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Gobo(n)WheelIndex"
      Pretty="Wheel Index"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Angle"
      Definition="Controls angle of indexed rotation of gobo wheel (n)."
      Explanation="Use this attribute to define indexed rotation angle of the gobo wheel for the gobos on the wheel When using this Gobo(n)WheelIndex as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)WheelIndex as the Logical Channel attribute."
      Label="Gobo Wheel Index"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Gobo(n)WheelSpin"
      Pretty="Wheel Spin"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="AngularSpeed"
      Definition="Controls the speed and direction of continuous rotation of gobo wheel (n)."
      Explanation="Speed and direction of a continuous rotation of a gobo wheel ('gobo rainbow effect') is control with this attribute. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)WheelSpin as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)WheelSpin as the Logical Channel attribute."
      Label="Gobo Wheel Spin"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Gobo(n)WheelShake"
      Pretty="Wheel Shake"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Definition="Controls frequency of the shake of gobo wheel (n)."
      Explanation="For gobo wheel that provides wheel shaking function, this attribute allows to set the frequency of the shake. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)WheelShake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)WheelShake as the Logical Channel attribute."
      Label="Gobo Wheel Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <SubPhysicalUnit
      Type="Amplitude"
      PhysicalUnit="Percent"
      PhysicalFrom="20"
      PhysicalTo="20"
      Description="This is the amount of shake as a percentage of the image size and defines the peak amplitude of the shake"/>
    <Attribute
      Name="Gobo(n)WheelRandom"
      Pretty="Wheel Random"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Definition="Controls speed of gobo wheel´s (n) random gobo slot selection."
      Explanation="Use this attribute to set the frequency of a random gobo selection. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)WheelRandom as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)WheelRandom as the Logical Channel attribute."
      Label="Gobo Wheel Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Gobo(n)WheelAudio"
      Pretty="Wheel Audio"
      MainAttribute="Gobo(n)"
      ActivationGroup="Gobo(n)"
      Feature="Gobo.Gobo"
      Definition="Controls audio-controlled functionality of gobo wheel (n)."
      Explanation="Use this attribute to turn on audio based gobo functions, like random gobo selection in the beat of the music. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)WheelAudio as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n). In case that Gobo(n) already exists in the same geometry, you can use the Gobo(n)WheelAudio as the Logical Channel attribute."
      Label="Gobo Wheel Audio"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Gobo(n)Pos"
      Pretty="G(n) &lt;&gt;"
      ActivationGroup="Gobo(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="Angle"
      Definition="Controls angle of indexed rotation of gobos in gobo wheel (n). This is the main attribute of gobo wheel’s (n) wheel slot control."
      Explanation="This attribute allows to set indexed position (angle) of a gobo in a gobo wheel and is typically used together with Gobo(n) attribute which selects the gobo. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Gobo Pos"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Gobo(n)PosRotate"
      Pretty="Rotate"
      MainAttribute="Gobo(n)Pos"
      ActivationGroup="Gobo(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="AngularSpeed"
      Definition="Controls the speed and direction of continuous rotation of gobos in gobo wheel (n)."
      Explanation="This attribute allows to set speed and direction of continuous rotation of a gobo in a gobo wheel and is typically used together with Gobo(n) attribute which selects the gobo. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)PosRotate as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n)Pos. In case that Gobo(n)Pos already exists in the same geometry, you can use the Gobo(n)PosRotate as the Logical Channel attribute."
      Label="Gobo Pos Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Gobo(n)PosShake"
      Pretty="Shake"
      MainAttribute="Gobo(n)Pos"
      ActivationGroup="Gobo(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Definition="Controls frequency of the shake of gobos in gobo wheel (n)."
      Explanation="This attribute allows to set frequency of shaking of a gobo in a gobo wheel and is typically used together with Gobo(n) attribute which selects the gobo. If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Gobo(n)PosShake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Gobo(n)Pos. In case that Gobo(n)Pos already exists in the same geometry, you can use the Gobo(n)PosShake as the Logical Channel attribute."
      Label="Gobo Pos Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Amplitude"
      PhysicalUnit="Percent"
      PhysicalFrom="20"
      PhysicalTo="20"
      Description="This defines the peak amplitude of the shake"/>
    <Attribute
      Name="AnimationWheel(n)"
      ActivationGroup="AnimationWheel(n)"
      Pretty="Anim(n)"
      Feature="Gobo.Gobo"
      Definition="This is the main attribute of the animation wheel's (n) wheel control. Selects slots in the animation wheel. A different channel function sets the angle of the indexed position in the selected slot or the angular speed of its continuous rotation. Is used for animation effects with multiple slots. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Explanation="Use this attribute to select one of the possible animators on an animation wheel for fixtures that provide animation selection on one channel and animation rotation/indexing on another channel(s). The actual animator selection way - continuous or steps (when continuous, you can freely index the animation wheel) is defined via physical properties of channel sets of this attribute. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Animation Wheel"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="AnimationWheel(n)Audio"
      ActivationGroup="AnimationWheel(n)"
      MainAttribute="AnimationWheel(n)"
      Feature="Gobo.Gobo"
      Pretty="Anim Audio"
      Definition="Controls audio-controlled functionality of animation wheel (n)."
      Explanation="This attribute controls how the animation wheel will behave when responding to an audio source for use with the AnimationWheel(n). When using this AnimationWheel(n)Audio as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n). In case that AnimationWheel(n) already exists in the same geometry, you can use the AnimationWheel(n)Audio as the Logical Channel attribute."
      Label="Animation Wheel Audio"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="AnimationWheel(n)Macro"
      ActivationGroup="AnimationWheel(n)"
      MainAttribute="AnimationWheel(n)"
      Feature="Gobo.Gobo"
      Pretty="Anim FX"
      Definition="Selects predefined effects in animation wheel (n)."
      Explanation="This attribute allows for selecting a fixture's predefined macro functions for the AnimationWheel(n). When using this AnimationWheel(n)Macro as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n). In case that AnimationWheel(n) already exists in the same geometry, you can use the AnimationWheel(n)Macro as the Logical Channel attribute."
      Label="Animation Wheel Macro"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationWheel(n)Random"
      ActivationGroup="AnimationWheel(n)"
      MainAttribute="AnimationWheel(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Pretty="Anim Random"
      Definition="Controls frequency of animation wheel (n) random slot selection."
      Explanation="Use this attribute to describe random effects of the Animation wheel prepared by the manufacturer of the fixture. When using this AnimationWheel(n)Random as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n). In case that AnimationWheel(n) already exists in the same geometry, you can use the AnimationWheel(n)Random as the Logical Channel attribute."
      Label="Animation Wheel Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="AnimationWheel(n)SelectEffects"
      ActivationGroup="AnimationWheel(n)"
      MainAttribute="AnimationWheel(n)"
      Feature="Gobo.Gobo"
      Pretty="Anim Select FX"
      Definition="Selects slots which run effects in animation wheel (n)."
      Explanation="Use this attribute to describe some effects of the AnimationWheel(n) prepared by the manufacturer of the fixture. When using this AnimationWheel(n)SelectEffects as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n). In case that AnimationWheel(n) already exists in the same geometry, you can use the AnimationWheel(n)SelectEffects as the Logical Channel attribute."
      Label="Animation Wheel Select Effects"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationWheel(n)SelectShake"
      ActivationGroup="AnimationWheel(n)"
      MainAttribute="AnimationWheel(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Pretty="Anim Select Shake"
      Definition="Selects slots which shake in animation wheel and controls the frequency of the slots shake within the same channel function."
      Explanation="When selecting a shake of an animation wheel slot and defining the frequency of the shake withing the same channel function, choose this attribute to describe the behavior. When using this AnimationWheel(n)SelectShake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n). In case that AnimationWheel(n) already exists in the same geometry, you can use the AnimationWheel(n)SelectShake as the Logical Channel attribute."
      Label="Animation Wheel Select Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <SubPhysicalUnit
      Type="Amplitude"
      PhysicalUnit="Percent"
      PhysicalFrom="20"
      PhysicalTo="20"
      Description="This defines the peak amplitude of the shake"/>
    <Attribute
      Name="AnimationWheel(n)SelectSpin"
      ActivationGroup="AnimationWheel(n)"
      MainAttribute="AnimationWheel(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="AngularSpeed"
      Pretty="Anim Select Spin"
      Definition="Selects slots whose rotation is continuous in animation wheel and controls the angular speed of the slot spin within the same channel function"
      Explanation="When selecting a rotation of an animation wheel slot and defining the angular speed of the rotation  withing the same channel function, choose this attribute to describe the behavior. When using this AnimationWheel(n)SelectSpin as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n). In case that AnimationWheel(n) already exists in the same geometry, you can use the AnimationWheel(n)SelectSpin as the Logical Channel attribute."
      Label="Animation Wheel Select Spin"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="AnimationWheel(n)Pos"
      ActivationGroup="AnimationWheel(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="Angle"
      Pretty="Anim Pos"
      Definition="Controls angle of indexed rotation of slots in animation wheel. This is the main attribute of animation wheel (n) wheel slot control."
      Explanation="This attribute allows to set indexed position (angle) of a animation wheel and is typically used together with AnimationWheel(n) attribute which selects the animation. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Animation Wheel Pos"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationWheel(n)PosRotate"
      ActivationGroup="AnimationWheel(n)Pos"
      MainAttribute="AnimationWheel(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="AngularSpeed"
      Pretty="Anim Rotate"
      Definition="Controls the speed and direction of continuous rotation of slots in animation wheel (n)."
      Explanation="This attribute allows to set speed and direction of continuous rotation of an animation wheel and is typically used together with AnimationWheel(n) attribute which selects the animation. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this AnimationWheel(n)PosRotate as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n)Pos. In case that AnimationWheel(n)Pos already exists in the same geometry, you can use the AnimationWheel(n)PosRotate as the Logical Channel attribute."
      Label="Animation Wheel Pos Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationWheel(n)PosShake"
      ActivationGroup="AnimationWheel(n)Pos"
      MainAttribute="AnimationWheel(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Pretty="Anim Shake"
      Definition="Controls frequency of the shake of slots in animation wheel (n)."
      Explanation="This attribute allows to set frequency of shaking of an animation wheel and is typically used together with AnimationWheel(n) attribute which selects the animation. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this AnimationWheel(n)PosShake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationWheel(n)Pos. In case that AnimationWheel(n)Pos already exists in the same geometry, you can use the AnimationWheel(n)PosShake as the Logical Channel attribute."
      Label="Animation Wheel Pos Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Amplitude"
      PhysicalUnit="Percent"
      PhysicalFrom="20"
      PhysicalTo="20"
      Description="This defines the peak amplitude of the shake"/>
    <Attribute
      Name="AnimationSystem(n)"
      ActivationGroup="AnimationSystem(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Percent"
      Pretty="Anim System"
      Definition="This is the main attribute of the animation system insertion control. Controls the insertion of the fixture's animation system in the light output. Is used for animation effects where a disk is inserted into the light output."
      Explanation="Use this attribute to select or engage an animation wheel for fixtures that provide animation selection on one channel and animation rotation/indexing on another channel(s). The actual animator selection way - continuous or steps (when continuous, you can freely index the animation wheel) is defined via physical properties of channel sets of this attribute. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Animation System"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)Ramp"
      ActivationGroup="AnimationSystem(n)"
      MainAttribute="AnimationSystem(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Pretty="Anim System Ramp"
      Definition="Sets frequency of animation system (n) insertion ramp."
      Explanation="When using this AnimationSystem(n)Ramp as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n). In case that AnimationSystem(n) already exists in the same geometry, you can use the AnimationSystem(n)Ramp as the Logical Channel attribute."
      Label="Animation System Ramp"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="50"
      PhysicalTo="50"
      Description="This defines the duration of the ramp in relation to the period."/>
    <SubPhysicalUnit
      Type="AmplitudeMin"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum position in relation to the whole way of the spline"/>
    <SubPhysicalUnit
      Type="AmplitudeMax"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the maximum position in relation to the whole way of the spline"/>
    <Attribute
      Name="AnimationSystem(n)Shake"
      ActivationGroup="AnimationSystem(n)"
      MainAttribute="AnimationSystem(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Pretty="Anim System Shake"
      Definition="Sets frequency of animation system (n) insertion shake."
      Explanation="When using this AnimationSystem(n)Shake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n). In case that AnimationSystem(n) already exists in the same geometry, you can use the AnimationSystem(n)Shake as the Logical Channel attribute."
      Label="Animation System Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="AmplitudeMin"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum position in relation to the whole way of the spline"/>
    <SubPhysicalUnit
      Type="AmplitudeMax"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the maximum position in relation to the whole way of the spline"/>
    <Attribute
      Name="AnimationSystem(n)Audio"
      ActivationGroup="AnimationSystem(n)"
      MainAttribute="AnimationSystem(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="None"
      Pretty="Anim System Audio"
      Definition="Controls audio-controlled functionality of animation system (n) insertion."
      Explanation="When using this AnimationSystem(n)Audio as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n). In case that AnimationSystem(n) already exists in the same geometry, you can use the AnimationSystem(n)Audio as the Logical Channel attribute."
      Label="Animation System Audio"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)Random"
      ActivationGroup="AnimationSystem(n)"
      MainAttribute="AnimationSystem(n)"
      Feature="Gobo.Gobo"
      PhysicalUnit="None"
      Pretty="Anim System Random"
      Definition="Controls frequency of animation system (n) random insertion."
      Explanation="When using this AnimationSystem(n)Random as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n). In case that AnimationSystem(n) already exists in the same geometry, you can use the AnimationSystem(n)Random as the Logical Channel attribute."
      Label="Animation System Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)Pos"
      ActivationGroup="AnimationSystem(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="Angle"
      Pretty="Anim System Pos"
      Definition="This is the main attribute of the animation system spinning control. Controls angle of indexed rotation of animation system (n) disk."
      Explanation="This attribute allows to set indexed position (angle) of a animation wheel and is typically used together with AnimationSystem(n) attribute which selects/engages the animation. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Animation System Pos"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)PosRotate"
      ActivationGroup="AnimationSystem(n)Pos"
      MainAttribute="AnimationSystem(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="AngularSpeed"
      Pretty="Anim System Rotate"
      Definition="Controls the speed and direction of continuous rotation of animation system (n) disk."
      Explanation="This attribute allows to set speed and direction of continuous rotation of an animation wheel and is typically used together with AnimationSystem(n) attribute which selects/engages the animation. If there is more than one animation wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this AnimationSystem(n)PosRotate as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n)Pos. In case that AnimationSystem(n)Pos already exists in the same geometry, you can use the AnimationSystem(n)PosRotate as the Logical Channel attribute."
      Label="Animation System Pos Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)PosShake"
      ActivationGroup="AnimationSystem(n)Pos"
      MainAttribute="AnimationSystem(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="Frequency"
      Pretty="Anim System Shake"
      Definition="Controls frequency of the shake of animation system (n) disk."
      Explanation="When using this AnimationSystem(n)PosShake as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n)Pos. In case that AnimationSystem(n)Pos already exists in the same geometry, you can use the AnimationSystem(n)PosShake as the Logical Channel attribute."
      Label="Animation System Pos Shake"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Amplitude"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the peak amplitude of the shake"/>
    <Attribute
      Name="AnimationSystem(n)PosRandom"
      ActivationGroup="AnimationSystem(n)Pos"
      MainAttribute="AnimationSystem(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="None"
      Pretty="Anim System Rot Random"
      Definition="Controls random speed of animation system (n) disk."
      Explanation="When using this AnimationSystem(n)PosRandom as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n)Pos. In case that AnimationSystem(n)Pos already exists in the same geometry, you can use the AnimationSystem(n)PosRandom as the Logical Channel attribute."
      Label="Animation System Pos Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)PosAudio"
      ActivationGroup="AnimationSystem(n)Pos"
      MainAttribute="AnimationSystem(n)Pos"
      Feature="Gobo.Gobo"
      PhysicalUnit="None"
      Pretty="Anim System Rot Audio"
      Definition="Controls audio-controlled functionality of animation system (n) disk."
      Explanation="When using this AnimationSystem(n)PosAudio as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to AnimationSystem(n)Pos. In case that AnimationSystem(n)Pos already exists in the same geometry, you can use the AnimationSystem(n)PosAudio as the Logical Channel attribute."
      Label="Animation System Pos Audio"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystem(n)Macro"
      Feature="Gobo.Gobo"
      PhysicalUnit="None"
      Pretty="Anim System Macro"
      Definition="Selects predefined effects in animation system (n)."
      Explanation="This attribute allows for selecting a fixture's predefined macro functions for the AnimationSystem(n)"
      Label="Animation System Macro"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="MediaFolder(n)"
      Pretty="Media Folder(n)"
      Feature="Gobo.Media"
      Definition="Selects folder that contains media content."
      Explanation="This attribute selects one of multiple folders that (usually) contain media. Any folder selection process is possible with this attribute."
      Label="Media Folder"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="MediaContent(n)"
      Pretty="Media Content(n)"
      Feature="Gobo.Media"
      Definition="Selects file with media content."
      Explanation="This attribute selects content that usually is located in one of the folders selected. Any content selection process is possible with this attribute."
      Label="Media Content"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ModelFolder(n)"
      Pretty="Model Folder(n)"
      Feature="Gobo.Media"
      PhysicalUnit="None"
      Definition="Selects folder that contains 3D model content. For example 3D meshes for mapping."
      Explanation="This attribute is selects specifically one of multiple folders for 3D content. Any folder selection process is possible with this attribute. If there is more than one folder the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Model Folder"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ModelContent(n)"
      Pretty="Model Content(n)"
      Feature="Gobo.Media"
      PhysicalUnit="None"
      Definition="Selects file with 3D model content."
      Explanation="This attribute selects a 3D model that usually is located in one of the 3D folders selected. Any content selection process is possible with this attribute. If there is more than one content folder the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Model Content"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Playmode"
      Pretty="Playmode"
      Definition="Defines media playback mode."
      Feature="Gobo.Media"
      Explanation="For devices that allow to set a mode of media playback, for example play and loop, play and stop..., use  this attribute to describe this behavior."
      Label="Media Playmode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PlayBegin"
      Pretty="Play Begin"
      Feature="Gobo.Media"
      PhysicalUnit="Time"
      Definition="Defines starting point of media content playback."
      Explanation="Use this attribute to describe a function that allows to set the starting time of media content playback."
      Label="Media Play Begin"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PlayEnd"
      Pretty="Play End"
      Feature="Gobo.Media"
      PhysicalUnit="Time"
      Definition="Defines end point of media content playback."
      Explanation="Use this attribute to describe a function that allows to set the end time of media content playback."
      Label="Media Play End"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PlaySpeed"
      Pretty="Play Speed"
      Feature="Gobo.Media"
      PhysicalUnit="Percent"
      Definition="Adjusts playback speed of media content."
      Explanation="Use this attribute to control the speed of media content playback"
      Label="Media Play Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorEffects(n)"
      Pretty="Color FX(n)"
      Feature="Color.Color"
      Definition="Selects predefined color effects built into the fixture."
      Explanation="Use this attribute to control selecting predefined color effects built into the fixture"
      Label="Color Effects"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Color(n)"
      Pretty="C(n)"
      ActivationGroup="ColorRGB"
      Feature="Color.Color"
      Definition="The fixture’s color wheel (n). Selects colors in color wheel (n). This is the main attribute of color wheel’s (n) wheel control."
      Explanation="Any device that can create colors by changing a mechanical color wheel inside the device uses this attribute to describe the different colors possible. If there is more than one color wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Color"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="True"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Color(n)WheelIndex"
      Pretty="Wheel Index"
      MainAttribute="Color(n)"
      ActivationGroup="ColorRGB"
      Feature="Color.Color"
      PhysicalUnit="Angle"
      Definition="Controls angle of indexed rotation of color wheel (n)"
      Explanation="The color wheel index describes an agle of rotation of the color wheel to exactly reproduce any mixture/position of the color wheel itself. The wild card will identify which color wheel will be indexed. When using this Color(n)WheelIndex as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Color(n). In case that Color(n) already exists in the same geometry, you can use the Color(n)WheelIndex as the Logical Channel attribute."
      Label="Color Wheel Index"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Color(n)WheelSpin"
      Pretty="Wheel Spin"
      MainAttribute="Color(n)"
      ActivationGroup="ColorRGB"
      Feature="Color.Color"
      PhysicalUnit="AngularSpeed"
      Definition="Controls the speed and direction of continuous rotation of color wheel (n)."
      Explanation="For special effects of a continuous rotating color wheel this attribute controls the direction of ration and the speed of rotation. If there is more than one color wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Color(n)WheelSpin as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Color(n). In case that Color(n) already exists in the same geometry, you can use the Color(n)WheelSpin as the Logical Channel attribute."
      Label="Color Wheel Spin"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Color(n)WheelRandom"
      Pretty="Wheel Random"
      MainAttribute="Color(n)"
      ActivationGroup="ColorRGB"
      Feature="Color.Color"
      PhysicalUnit="Frequency"
      Definition="Controls frequency of color wheel´s (n) random color slot selection."
      Explanation="The device internal random color wheel selection frequency will be controlled by this attribute. If there is more than one color wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Color(n)WheelRandom as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Color(n). In case that Color(n) already exists in the same geometry, you can use the Color(n)WheelRandom as the Logical Channel attribute."
      Label="Color Wheel Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="Color(n)WheelAudio"
      Pretty="Wheel Audio"
      MainAttribute="Color(n)"
      ActivationGroup="ColorRGB"
      Feature="Color.Color"
      Definition="Controls audio-controlled functionality of color wheel (n)."
      Explanation="The device internal audio-based color wheel selection frequency will be controlled by this attribute. If there is more than one color wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Color(n)WheelAudio as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Color(n). In case that Color(n) already exists in the same geometry, you can use the Color(n)WheelAudio as the Logical Channel attribute."
      Label="Color Wheel Audio"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="PlacementOffset"
      PhysicalUnit="Degree"
      PhysicalFrom="270"
      PhysicalTo="270"/>
    <Attribute
      Name="ColorAdd_R"
      Pretty="R"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.64,0.33,21.3"
      Definition="Controls the intensity of the fixture's red emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Red color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Red Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_G"
      Pretty="G"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.3,0.6,71.5"
      Definition="Controls the intensity of the fixture's green emitters for direct additive color mixing"
      Explanation="Gradual (fading) change of intensity or saturation of an additive Green color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Green Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_B"
      Pretty="B"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.15,0.06,7.2"
      Definition="Controls the intensity of the fixture's blue emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Blue color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Blue Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_C"
      Pretty="C"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.225,0.329,78.7"
      Definition="Controls the intensity of the fixture's cyan emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Cyan color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Cyan Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_M"
      Pretty="M"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.321,0.154,28.5"
      Definition="Controls the intensity of the fixture's magenta emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Magenta color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Magenta Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_Y"
      Pretty="Y"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.419,0.505,92.8"
      Definition="Controls the intensity of the fixture's yellow emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Yellow color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Yellow Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_RY"
      Pretty="Amber"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.477,0.460,57.0"
      Definition="Controls the intensity of the fixture's amber emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Amber color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Amber Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_GY"
      Pretty="Lime"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.372,0.543,82.1"
      Definition="Controls the intensity of the fixture's lime emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Lime color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Lime Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_GC"
      Pretty="Blue-Green"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.250,0.419,75.1"
      Definition="Controls the intensity of the fixture's blue-green emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Blue-Green color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Blue-Green Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_BC"
      Pretty="Light-Blue "
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.200,0.239,43.0"
      Definition="Controls the intensity of the fixture's light-blue emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Light Blue color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Light-Blue Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_BM"
      Pretty="Purple"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.254,0.117,17.9"
      Definition="Controls the intensity of the fixture's purple emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Purple (Deep Blue) color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Purple Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_RM"
      Pretty="Pink"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.403,0.200,24.9"
      Definition="Controls the intensity of the fixture's pink emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Pink color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Pink Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_W"
      Pretty="White"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.313,0.329,100.0"
      Definition="Controls the intensity of the fixture's white emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive White color/emitter with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="White Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_WW"
      Pretty="WW"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.319,0.340,99.3"
      Definition="Controls the intensity of the fixture's warm white emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Warm White color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Warm-White Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_CW"
      Pretty="CW"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.306,0.329,97.9"
      Definition="Controls the intensity of the fixture's cool white emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Cool White color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Cool-White Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorAdd_UV"
      Pretty="UV"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.176,0.005,0.6"
      Definition="Controls the intensity of the fixture's UV emitters for direct additive color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive UV color/emitter/flag with direct access to the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="UV Additive Direct"
      UseEmitter="True"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSub_R"
      Pretty="R"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.64,0.33,21.3"
      Definition="Controls the insertion of the fixture's red filter flag for direct subtractive color mixing."
      Explanation="Gradual (fading) change of insertion or saturation of a subtractive Red color flag/filter with direct access to the color. The color is the resulting color when the filter is fully inserted. Physical values go from 0 = no insertion/no color, to 1 = full insertion/full color saturation."
      Label="Red Subtractive"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSub_G"
      Pretty="G"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.3,0.6,71.5"
      Definition="Controls the insertion of the fixture's green filter flag for direct subtractive color mixing."
      Explanation="Gradual (fading) change of insertion or saturation of a subtractive Green color flag/filter with direct access to the color. The color is the resulting color when the filter is fully inserted. Physical values go from 0 = no insertion/no color, to 1 = full insertion/full color saturation."
      Label="Green Subtractive"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSub_B"
      Pretty="B"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.15,0.06,7.2"
      Definition="Controls the insertion of the fixture's blue filter flag for direct subtractive color mixing."
      Explanation="Gradual (fading) change of insertion or saturation of a subtractive Blue color flag/filter with direct access to the color. The color is the resulting color when the filter is fully inserted. Physical values go from 0 = no insertion/no color, to 1 = full insertion/full color saturation."
      Label="Blue Subtractive"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSub_C"
      Pretty="C"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.225,0.329,78.7"
      Definition="Controls the insertion of the fixture's cyan filter flag for direct subtractive color mixing."
      Explanation="Gradual (fading) change of insertion or saturation of a subtractive Cyan color flag/filter/emitter with direct access to the color. The color is the resulting color when the filter is fully inserted. Physical values go from 0 = no insertion/no color, to 1 = full insertion/full color saturation."
      Label="Cyan Subtractive"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSub_M"
      Pretty="M"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.321,0.154,28.5"
      Definition="Controls the insertion of the fixture's magenta filter flag for direct subtractive color mixing."
      Explanation="Gradual (fading) change of insertion or saturation of a subtractive Magenta color flag/filter/emitter with direct access to the color. The color is the resulting color when the filter is fully inserted. Physical values go from 0 = no insertion/no color, to 1 = full insertion/full color saturation."
      Label="Magenta Subtractive"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSub_Y"
      Pretty="Y"
      ActivationGroup="ColorRGB"
      Feature="Color.RGB"
      PhysicalUnit="ColorComponent"
      Color="0.419,0.505,92.8"
      Definition="Controls the insertion of the fixture's yellow filter flag for direct subtractive color mixing."
      Explanation="Gradual (fading) change of insertion or saturation of a subtractive Yellow color flag/filter/emitter with direct access to the color. The color is the resulting color when the filter is fully inserted. Physical values go from 0 = no insertion/no color, to 1 = full insertion/full color saturation."
      Label="Yellow Subtractive"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorMacro(n)"
      Pretty="Color Macro(n)"
      Feature="Color.RGB"
      Definition="Selects predefined colors that are programmed in the fixture's firmware."
      Explanation="Choose this attribute to control the selection of predefined fixed colors, like Color Presets or Swatchbook Colors. The individual colors are defined by linking wheel slots to channel sets. If there is more than one color macro the wild-card (n) will be incremented and the number then indicates which color macro will be controlled."
      Label="Color Macro"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="True"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorMacro(n)Rate"
      Pretty="Color Macro(n) Rate"
      Feature="Color.RGB"
      Definition="Controls the time between Color Macro steps."
      Explanation="Use this attribute to describe a function which is setting the time or speed of the Color Macro steps."
      Label="Color Macro Rate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CTO"
      Pretty="CTO"
      Feature="Color.Color"
      PhysicalUnit="Temperature"
      Definition="Controls the fixture's &quot;Correct to orange&quot; wheel or mixing system."
      Explanation="Choose this attribute to control a function that modifies the Color Temperature of a fixture's light output. CTO decreases the Color Temperature from its default. Physical values describe the resulting Color Temperature."
      Label="CTO"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CTC"
      Pretty="CTC"
      Feature="Color.Color"
      PhysicalUnit="Temperature"
      Definition="Controls the fixture's &quot;Correct to color&quot; wheel or mixing system."
      Explanation="Choose this attribute to control a function that modifies the Color Temperature of a fixture's light output. CTC either increases or decreases the Color Temperature from its default. Physical values describe the resulting Color Temperature."
      Label="CTC"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CTB"
      Pretty="CTB"
      Feature="Color.Color"
      PhysicalUnit="Temperature"
      Definition="Controls the fixture's &quot;Correct to blue&quot; wheel or mixing system."
      Explanation="Choose this attribute to control a function that modifies the Color Temperature of a fixture's light output. CTB increases the Color Temperature from its default. Physical values describe the resulting Color Temperature."
      Label="CTB"
      UseEmitter="False"
      UseFilter="True"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Tint"
      Pretty="Tint"
      Feature="Color.Color"
      Definition="Controls the fixture's &quot;Correct green to magenta&quot; wheel or mixing system."
      Explanation="Choose this attribute to control a function that adjusts the Green/Magenta shift of a fixture's light output."
      Label="Tint"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="HSB_Hue"
      Pretty="H"
      ActivationGroup="ColorHSB"
      Feature="Color.HSB"
      PhysicalUnit="Angle"
      Definition="Controls the fixture's color attribute regarding the hue."
      Explanation="Use this attribute to control the fixture's Hue (color)"
      Label="HSB Hue"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="HSB_Saturation"
      Pretty="S"
      ActivationGroup="ColorHSB"
      Feature="Color.HSB"
      PhysicalUnit="Percent"
      Definition="Controls the fixture's color attribute regarding the saturation."
      Explanation="Use this attribute to control a fixture's color Saturation (richness)"
      Label="HSB Saturation"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="HSB_Brightness"
      Pretty="B"
      ActivationGroup="ColorHSB"
      Feature="Color.HSB"
      PhysicalUnit="Percent"
      Definition="Controls the fixture's color attribute regarding the brightness."
      Explanation="Use this attribute to control a fixture's color Brightness"
      Label="HSB Brightness"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="HSB_Quality"
      Pretty="Q"
      ActivationGroup="ColorHSB"
      Feature="Color.HSB"
      PhysicalUnit="Percent"
      Definition="Controls the fixture's color attribute regarding the quality."
      Explanation="For devices that allow to adjust quality of HSB colors, use this attribute to describe this feature."
      Label="HSB Quality"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="CIE_X"
      Pretty="X"
      ActivationGroup="ColorCIE"
      Feature="Color.CIE"
      Definition="Controls the fixture's CIE 1931 color attribute regarding the chromaticity x."
      Explanation="Use this attribute to describe a feature that sets the x parameter of chromaticity of CIE 1931 based color definition."
      Label="CIE X"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="CIE_Y"
      Pretty="Y"
      ActivationGroup="ColorCIE"
      Feature="Color.CIE"
      Definition="Controls the fixture's CIE 1931 color attribute regarding the chromaticity y."
      Explanation="Use this attribute to describe a feature that sets the y parameter of chromaticity of CIE 1931 based color definition."
      Label="CIE Y"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="CIE_Brightness"
      Pretty="B"
      ActivationGroup="ColorCIE"
      Feature="Color.CIE"
      PhysicalUnit="Percent"
      Definition="Controls the fixture's CIE 1931 color attribute regarding the brightness (Y)."
      Explanation="Use this attribute to describe a feature that sets the brightness of chromaticity of CIE 1931 based color definition."
      Label="CIE Brightness"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorRGB_Red"
      Pretty="R"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's red attribute for indirect RGB color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Red color/emitter/flag, where the device is making internal adjustments of the color and the operator thus has an indirect control of the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Red Additive Indirect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="ColorRGB_Green"
      Pretty="G"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's green attribute for indirect RGB color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Green color/emitter/flag, where the device is making internal adjustments of the color and the operator thus has an indirect control of the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Green Additive Indirect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="ColorRGB_Blue"
      Pretty="B"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's blue attribute for indirect RGB color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Blue color/emitter/flag, where the device is making internal adjustments of the color and the operator thus has an indirect control of the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Blue Additive Indirect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="ColorRGB_Cyan"
      Pretty="C"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's cyan attribute for indirect CMY color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Cyan color/emitter/flag, where the device is making internal adjustments of the color and the operator thus has an indirect control of the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Cyan Additive Indirect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="ColorRGB_Magenta"
      Pretty="M"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's magenta attribute for indirect CMY color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive Magenta color/emitter/flag, where the device is making internal adjustments of the color and the operator thus has an indirect control of the color. Physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Magenta Additive Indirect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="ColorRGB_Yellow"
      Pretty="Y"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's yellow attribute for indirect CMY color mixing."
      Explanation="Gradual (fading) change of intensity or saturation of an additive yellow color/emitter/flag, where the device is making internal adjustments of the color and the operator thus has an indirect control of the color. physical values go from 0 = no output, to 1 = full output/saturation."
      Label="Yellow Additive Indirect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="ColorRGB_Quality"
      Pretty="Q"
      ActivationGroup="ColorIndirect"
      Feature="Color.Indirect"
      Definition="Controls the fixture's quality attribute for indirect color mixing."
      Explanation="Use this attribute to describe a function of the device that allows the operator to control the quality parameter of the device's color mixing."
      Label="Additive Indirect Quality"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="True"
      UseColorSpace="True"/>
    <Attribute
      Name="VideoBoost_R"
      Feature="Color.ColorCorrection"
      PhysicalUnit="None"
      Pretty="Boost R"
      Color="0.64,0.33,21.3"
      Definition="Adjusts color boost red of content."
      Explanation="Use this attribute to describe a function that allows to raise up intensity of red color in the media content."
      Label="Video Boost Red"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoBoost_G"
      Pretty="Boost G"
      Feature="Color.ColorCorrection"
      PhysicalUnit="None"
      Color="0.3,0.6,71.5"
      Definition="Adjusts color boost green of content."
      Explanation="Use this attribute to describe a function that allows to raise up intensity of green color in the media content."
      Label="Video Boost Green"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoBoost_B"
      Pretty="Boost B"
      Feature="Color.ColorCorrection"
      PhysicalUnit="None"
      Color="0.15,0.06,7.2"
      Definition="Adjusts color boost blue of content."
      Explanation="Use this attribute to describe a function that allows to raise up intensity of green color in the media content."
      Label="Video Boost Blue"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoHueShift"
      Pretty="Hue Shift"
      Feature="Color.HSBC_Shift"
      PhysicalUnit="Angle"
      Definition="Adjusts color hue shift of content."
      Explanation="Use this attribute to describe a function that allows to set color hue shift of media content."
      Label="Video Hue Shift"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoSaturation"
      Pretty="S"
      Feature="Color.HSBC_Shift"
      PhysicalUnit="Percent"
      Definition="Adjusts saturation of content."
      Explanation="Use this attribute to describe a function that allows to set saturation of media content."
      Label="Video Saturation"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoBrightness"
      Pretty="B"
      Feature="Color.HSBC_Shift"
      PhysicalUnit="Percent"
      Definition="Adjusts brightness of content."
      Explanation="Use this attribute to describe a function that allows to set brightness of media content."
      Label="Video Brightness"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoContrast"
      Pretty="C"
      Feature="Color.HSBC_Shift"
      PhysicalUnit="Percent"
      Definition="Adjusts contrast of content."
      Explanation="Use this attribute to describe a function that allows to set contrast of media content."
      Label="Video Contrast"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoKeyColor_R"
      Pretty="R"
      Feature="Color.ColorKey"
      PhysicalUnit="None"
      Color="0.64,0.33,21.3"
      Definition="Adjusts red color for color keying."
      Explanation="Use this attribute to describe a function that provides media content color keying by red color."
      Label="Video Key Color Red"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoKeyColor_G"
      Pretty="G"
      Feature="Color.ColorKey"
      PhysicalUnit="None"
      Color="0.3,0.6,71.5"
      Definition="Adjusts green color for color keying."
      Explanation="Use this attribute to describe a function that provides media content color keying by green color."
      Label="Video Key Color Green"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoKeyColor_B"
      Pretty="B"
      Feature="Color.ColorKey"
      PhysicalUnit="None"
      Definition="Adjusts blue color for color keying."
      Color="0.15,0.06,7.2"
      Explanation="Use this attribute to describe a function that provides media content color keying by blue color."
      Label="Video Color Key Blue"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoKeyIntensity"
      Pretty="Intensity"
      Feature="Color.ColorKey"
      PhysicalUnit="Percent"
      Definition="Adjusts intensity of color keying."
      Explanation="Use this attribute to describe a function that adjusts the intensity of color keying."
      Label="Video Key Intensity"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoKeyTolerance"
      Pretty="Tolerance"
      Feature="Color.ColorKey"
      PhysicalUnit="None"
      Definition="Adjusts tolerance of color keying."
      Explanation="Use this attribute to describe a function that adjusts the tolerance value of color keying."
      Label="Video Key Tolerance"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeDuration"
      Pretty="Strobe Duration"
      Feature="Beam.Beam"
      PhysicalUnit="Time"
      Definition="Controls the length of a strobe flash."
      Explanation="Use this attribute to describe a function that can adjust the duration of an individual flash."
      Label="Strobe Duration"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeRate"
      Pretty="Strobe Rate"
      Feature="Beam.Beam"
      Definition="Controls the time between strobe flashes."
      Explanation="Use this attribute to describe a function that can adjust the time between individual flashes."
      Label="Strobe Rate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeFrequency"
      Pretty="Strobe Frequency"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of strobe flashes."
      Explanation="Setting the frequency of strobing is described with this attribute."
      Label="Strobe Frequency"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeShutter"
      Pretty="StrobeM Shutter"
      Feature="Beam.Beam"
      Definition="Strobe mode shutter. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a Shutter Mode."
      Label="Strobe Mode Shutter"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeStrobe"
      Pretty="StrobeM Strobe"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode strobe. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a Strobe Mode. When using this StrobeModeStrobe as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModeStrobe as the Logical Channel attribute."
      Label="Strobe Mode Strobe"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModePulse"
      Pretty="StrobeM Pulse"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a Pulsing Strobe Mode. When using this StrobeModePulse as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModePulse as the Logical Channel attribute."
      Label="Strobe Mode Pulse"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModePulseOpen"
      Pretty="StrobeM PulseOpen"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode opening pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a mode where the shutter pulses with slower opening and faster closing behavior. When using this StrobeModePulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModePulseOpen as the Logical Channel attribute."
      Label="Strobe Mode Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModePulseClose"
      Pretty="StrobeM Pulse Close"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode closing pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a mode where the shutter pulses with slower closing and faster opening behavior. When using this StrobeModePulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModePulseClose as the Logical Channel attribute."
      Label="Strobe Mode Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeRandom"
      Pretty="StrobeM Random"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode random strobe. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a mode where the shutter into a mode of random strobing. When using this StrobeModeRandom as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModeRandom as the Logical Channel attribute."
      Label="Strobe Mode Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeRandomPulse"
      Pretty="StrobeM Random Pulse"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode random pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a mode where the shutter into a mode of random pulse based strobing. When using this StrobeModeRandomPulse as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModeRandomPulse as the Logical Channel attribute."
      Label="Strobe Mode Random Pulse"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeRandomPulseOpen"
      Pretty="StrobeM Random Pulse Open"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode random opening pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a mode where the shutter pulses in random intervals with slower opening and faster closing behavior. When using this StrobeModeRandomPulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModeRandomPulseOpen as the Logical Channel attribute."
      Label="Strobe Mode Random Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeRandomPulseClose"
      Pretty="StrobeM Random Pulse Close"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode random closing pulse. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="Use this attribute do describe a function that allows to set to shutter/strobe into a mode where the shutter pulses in random intervals with slower closing and faster opening behavior. When using this StrobeModeRandomPulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModeRandomPulseClose as the Logical Channel attribute."
      Label="Strobe Mode Random Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeModeEffect"
      Pretty="StrobeM Effect"
      MainAttribute="StrobeModeShutter"
      Feature="Beam.Beam"
      Definition="Strobe mode random shutter effect feature. Use this attribute together with StrobeFrequency to define the type of the shutter / strobe."
      Explanation="When using this StrobeModeEffect as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to StrobeModeShutter. In case that StrobeModeShutter already exists in the same geometry, you can use the StrobeModeEffect as the Logical Channel attribute."
      Label="Strobe Mode Effect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Shutter(n)"
      Pretty="Sh(n)"
      Feature="Beam.Beam"
      Definition="Controls the fixture´s mechanical or electronical shutter feature."
      Explanation="Open/close style of change of intensity or brightness. Physical values go between 0 = closed, to 1 = open. If there is more than one shutter the wild-card (n) will be incremented and the number then indicates which shutter will be controlled."
      Label="Shutter"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Shutter(n)Strobe"
      Pretty="Strobe(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical strobe shutter feature."
      Explanation="When using this Shutter(n)Strobe as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)Strobe as the Logical Channel attribute."
      Label="Shutter Strobe"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Duration"
      PhysicalUnit="Time"
      PhysicalFrom="0.025"
      PhysicalTo="0.025"
      Description="This defines the duration of the on time of the strobe."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the strobe from the start as percentage of the total period."/>
    <Attribute
      Name="Shutter(n)StrobePulse"
      Pretty="Pulse(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical pulse shutter feature."
      Explanation="When using this Shutter(n)StrobePulse as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobePulse as the Logical Channel attribute."
      Label="Shutter Strobe Pulse"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the pulse is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the pulse from the start as percentage of the total period."/>
    <Attribute
      Name="Shutter(n)StrobePulseClose"
      Pretty="Pulse Close(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical closing pulse shutter feature. The pulse is described by a ramp function."
      Explanation="When using this Shutter(n)StrobePulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobePulseClose as the Logical Channel attribute."
      Label="Shutter Strobe Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the ramp is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the ramp from the start as percentage of the total period."/>
    <Attribute
      Name="Shutter(n)StrobePulseOpen"
      Pretty="Pulse Open(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical opening pulse shutter feature. The pulse is described by a ramp function."
      Explanation="When using this Shutter(n)StrobePulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobePulseOpen as the Logical Channel attribute."
      Label="Shutter Strobe Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the ramp is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the ramp from the start as percentage of the total period."/>
    <Attribute
      Name="Shutter(n)StrobeRandom"
      Pretty="Random(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical random strobe shutter feature."
      Explanation="When using this Shutter(n)StrobeRandom as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobeRandom as the Logical Channel attribute."
      Label="Shutter Strobe Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Duration"
      PhysicalUnit="Time"
      PhysicalFrom="0.025"
      PhysicalTo="0.025"
      Description="This defines the duration of the on time of the strobe."/>
    <Attribute
      Name="Shutter(n)StrobeRandomPulse"
      Pretty="Random Pulse(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical random pulse shutter feature."
      Explanation="When using this Shutter(n)StrobeRandomPulse as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobeRandomPulse as the Logical Channel attribute."
      Label="Shutter Strobe Random Pulse"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Shutter(n)StrobeRandomPulseClose"
      Pretty="Random Pulse Close(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical random closing pulse shutter feature. The pulse is described by a ramp function."
      Explanation="When using this Shutter(n)StrobeRandomPulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobeRandomPulseClose as the Logical Channel attribute."
      Label="Shutter Strobe Random Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Shutter(n)StrobeRandomPulseOpen"
      Pretty="Random Pulse Open(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical random opening pulse shutter feature. The pulse is described by a ramp function."
      Explanation="When using this Shutter(n)StrobeRandomPulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobeRandomPulseOpen as the Logical Channel attribute."
      Label="Shutter Strobe Random Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Shutter(n)StrobeEffect"
      Pretty="Effect(n)"
      MainAttribute="Shutter(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Controls the frequency of the fixture´s mechanical or electronical shutter effect feature."
      Explanation="When using this Shutter(n)StrobeEffect as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Shutter(n). In case that Shutter(n) already exists in the same geometry, you can use the Shutter(n)StrobeEffect as the Logical Channel attribute."
      Label="Shutter Strobe Effect"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Iris"
      Pretty="Iris"
      Feature="Beam.Beam"
      Definition="Controls the diameter of the fixture's beam."
      Explanation="An iris diaphragm made of movable leaves which allows to gradually change the diameter of the beam is described with this attribute."
      Label="Iris"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="IrisStrobe"
      Pretty="Strobe"
      MainAttribute="Iris"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of the iris's strobe feature."
      Explanation="Strobing function created by fast movements of an iris is described with this attribute. When using this IrisStrobe as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Iris. In case that Iris already exists in the same geometry, you can use the IrisStrobe as the Logical Channel attribute."
      Label="Iris Strobe"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Duration"
      PhysicalUnit="Time"
      PhysicalFrom="0.3"
      PhysicalTo="0.3"
      Description="This defines the duration of the on time of the iris."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the strobe from the start as percentage of the total period."/>
    <SubPhysicalUnit
      Type="MinimumOpening"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum percentage to which the iris closes."/>
    <Attribute
      Name="IrisStrobeRandom"
      Pretty="Random Strobe"
      MainAttribute="Iris"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of the iris's random movement."
      Explanation="Strobing in random intervals created by fast movements of an iris is described with this attribute. When using this IrisStrobeRandom as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Iris. In case that Iris already exists in the same geometry, you can use the IrisStrobeRandom as the Logical Channel attribute."
      Label="Iris Strobe Random"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="Duration"
      PhysicalUnit="Time"
      PhysicalFrom="0.3"
      PhysicalTo="0.3"
      Description="This defines the duration of the on time of the iris."/>
    <SubPhysicalUnit
      Type="MinimumOpening"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum percentage to which the iris closes."/>
    <Attribute
      Name="IrisPulseClose"
      Pretty="Pulse Close"
      MainAttribute="Iris"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of iris's closing pulse."
      Explanation="A function that allows to adjust frequency of an iris based strobing where the iris pulses with slower closing and faster opening behavior. When using this IrisPulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Iris. In case that Iris already exists in the same geometry, you can use the IrisPulseClose as the Logical Channel attribute."
      Label="Iris Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the pulse of the iris is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the pulse from the start as percentage of the total period."/>
    <SubPhysicalUnit
      Type="MinimumOpening"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum percentage to which the iris closes."/>
    <Attribute
      Name="IrisPulseOpen"
      Pretty="Pulse Open"
      MainAttribute="Iris"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of iris's opening pulse."
      Explanation="A function that allows to adjust frequency of an iris based strobing where the iris pulses with slower opening and faster closing behavior. When using this IrisPulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Iris. In case that Iris already exists in the same geometry, you can use the IrisPulseOpen as the Logical Channel attribute."
      Label="Iris Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the pulse of the iris is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the pulse from the start as percentage of the total period."/>
    <SubPhysicalUnit
      Type="MinimumOpening"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum percentage to which the iris closes."/>
    <Attribute
      Name="IrisRandomPulseClose"
      Pretty="Random Pulse Close"
      MainAttribute="Iris"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of iris's random closing pulse."
      Explanation="A function that allows to enable an iris based strobing in random intervals where the iris pulses with slower opening and faster closing behavior. When using this IrisRandomPulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Iris. In case that Iris already exists in the same geometry, you can use the IrisRandomPulseClose as the Logical Channel attribute."
      Label="Iris Random Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="MinimumOpening"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum percentage to which the iris closes."/>
    <Attribute
      Name="IrisRandomPulseOpen"
      Pretty="Random Pulse Open"
      MainAttribute="Iris"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of iris's random opening pulse."
      Explanation="A function that allows to enable an iris based strobing in random intervals where the iris pulses with slower closing and faster opening behavior. When using this IrisRandomPulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Iris. In case that Iris already exists in the same geometry, you can use the IrisRandomPulseOpen as the Logical Channel attribute."
      Label="Iris Random Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="MinimumOpening"
      PhysicalUnit="Percent"
      PhysicalFrom="0"
      PhysicalTo="0"
      Description="This defines the minimum percentage to which the iris closes."/>
    <Attribute
      Name="Frost(n)"
      Pretty="Frost(n)"
      Feature="Beam.Beam"
      Definition="The ability to soften the fixture's spot light with a frosted lens."
      Explanation="For devices that allow to control insertion of frost lens or flag into the beam, to soften it, use this attribute to describe this function."
      Label="Frost"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Frost(n)PulseOpen"
      Pretty="Pulse Open (n)"
      MainAttribute="Frost(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of frost's opening pulse"
      Explanation="Use this attribute do describe a function that allows to set to frost into a mode where the frost pulses with slower opening and faster closing behavior. When using this Frost(n)PulseOpen as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Frost(n). In case that Frost(n) already exists in the same geometry, you can use the Frost(n)PulseOpen as the Logical Channel attribute."
      Label="Frost Pulse Open"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the pulse of the frost is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the pulse from the start as percentage of the total period."/>
    <Attribute
      Name="Frost(n)PulseClose"
      Pretty="Pulse Close (n)"
      MainAttribute="Frost(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of frost's closing pulse."
      Explanation="Use this attribute do describe a function that allows to set to frost into a mode where the frost pulses with slower closing and faster opening behavior. When using this Frost(n)PulseClose as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Frost(n). In case that Frost(n) already exists in the same geometry, you can use the Frost(n)PulseClose as the Logical Channel attribute."
      Label="Frost Pulse Close"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the pulse of the frost is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the pulse from the start as percentage of the total period."/>
    <Attribute
      Name="Frost(n)Ramp"
      Pretty="Ramp (n)"
      MainAttribute="Frost(n)"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Sets frequency of frost's ramp."
      Explanation="When using this Frost(n)Ramp as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Frost(n). In case that Frost(n) already exists in the same geometry, you can use the Frost(n)Ramp as the Logical Channel attribute."
      Label="Frost Ramp"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="DutyCycle"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the fraction of one period in which the ramp of the frost is on."/>
    <SubPhysicalUnit
      Type="TimeOffset"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the offset of the end of the ramp from the start as percentage of the total period."/>
    <Attribute
      Name="Prism(n)"
      Pretty="Prism(n)"
      ActivationGroup="Prism"
      Feature="Beam.Beam"
      Definition="The fixture’s prism wheel (n). Selects prisms in prism wheel (n). A different channel function sets the angle of the indexed position in the selected prism or the angular speed of its continuous rotation. This is the main attribute of prism wheel’s (n) wheel control."
      Explanation="Use this attribute to select a prism in a prism wheel for fixtures that provide prism selection on one channel and prism rotation/indexing on another channel(s). If there is more than one prism wheel or carousel, the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Prism"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Prism(n)SelectSpin"
      Pretty="Select Spin(n)"
      MainAttribute="Prism(n)"
      ActivationGroup="Prism"
      Feature="Beam.Beam"
      PhysicalUnit="AngularSpeed"
      Definition="Selects prisms whose rotation is continuous in prism wheel (n) and controls the angular speed of the prism’s spin within the same channel function."
      Explanation="Selects prism whose rotation is continuous in prism wheel (n) and controls the angular speed of the prism’s spin within the same channel function. If there is more than one prism wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Prism(n)SelectSpin as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Prism(n). In case that Prism(n) already exists in the same geometry, you can use the Prism(n)SelectSpin as the Logical Channel attribute."
      Label="Prism Select Spin"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Prism(n)Macro"
      Pretty="Prism(n) Macro"
      MainAttribute="Prism(n)"
      ActivationGroup="Prism"
      Feature="Beam.Beam"
      Definition="Macro functions of prism wheel (n)."
      Explanation="Use this attribute for manufacturer defined fixture specific effects on a prisms. If there is more than one prism wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Prism(n)Macro as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Prism(n). In case that Prism(n) already exists in the same geometry, you can use the Prism(n)Macro as the Logical Channel attribute."
      Label="Prism Macro"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Prism(n)Pos"
      Pretty="Prism(n) Pos"
      Feature="Beam.Beam"
      PhysicalUnit="AngularSpeed"
      Definition="Controls angle of indexed rotation of prisms in prism wheel (n). This is the main attribute of prism wheel’s 1 wheel slot control."
      Explanation="This attribute allows to set indexed position (angle) of a prism in a prism wheel and is typically used together with Prism(n) attribute which selects the prism. If there is more than one prism wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Prism Pos"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Prism(n)PosRotate"
      Pretty="Rotate(n)"
      MainAttribute="Prism(n)Pos"
      ActivationGroup="Prism"
      Feature="Beam.Beam"
      PhysicalUnit="AngularSpeed"
      Definition="Controls the speed and direction of continuous rotation of prisms in prism wheel (n)."
      Explanation="This attribute allows to set speed and direction of continuous rotation of a prism in a prism wheel and is typically used together with Prism(n) attribute which selects the prism. If there is more than one prism wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled. When using this Prism(n)PosRotate as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Prism(n)Pos. In case that Prism(n)Pos already exists in the same geometry, you can use the Prism(n)PosRotate as the Logical Channel attribute."
      Label="Prism Pos Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Effects(n)"
      Pretty="FX(n)"
      Feature="Beam.Beam"
      Definition="Generically predefined macros and effects of a fixture."
      Explanation="Use this attribute to describe some effects and macros that are not possible to describe with some specific attribute."
      Label="Effects"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Effects(n)Rate"
      Pretty="FX(n) Rate"
      Feature="Beam.Beam"
      PhysicalUnit="Frequency"
      Definition="Frequency of running effects."
      Explanation="Use this attribute to set frequency of some unspecified, generic effects."
      Label="Effects Rate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Effects(n)Fade"
      Pretty="FX(n) Fade"
      Feature="Beam.Beam"
      Definition="Snapping or smooth look of running effects."
      Explanation="Use this attribute to set fade of some unspecified, generic effects."
      Label="Effects Fade"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Effects(n)Adjust(m)"
      Pretty="FX(n) Adjust(m)"
      Feature="Beam.Beam"
      Definition="Controls parameter (m) of effect (n)"
      Explanation="Use this to set some parameter of some generic effect."
      Label="Effects Adjust"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Effects(n)Pos"
      Pretty="FX(n) Pos"
      Feature="Beam.Beam"
      PhysicalUnit="Angle"
      Definition="Controls angle of indexed rotation of slot/effect in effect wheel/macro (n). This is the main attribute of effect wheel/macro (n) slot/effect control."
      Explanation="Use this to set angle parameter of some generic effect."
      Label="Effects Pos"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Effects(n)PosRotate"
      Pretty="FX(n) Rotate"
      MainAttribute="Effects(n)Pos"
      Feature="Beam.Beam"
      PhysicalUnit="AngularSpeed"
      Definition="Controls speed and direction of slot/effect in effect wheel (n)."
      Explanation="When using this Effects(n)PosRotate as a Channel Function attribute, make sure that the attribute for the Logical Channel is set to Effects(n)Pos. In case that Effects(n)Pos already exists in the same geometry, you can use the Effects(n)PosRotate as the Logical Channel attribute."
      Label="Effects Pos Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="EffectsSync"
      Pretty="FX Sync"
      Feature="Beam.Beam"
      Definition="Sets offset between running effects and effects 2."
      Explanation="Use this attribute to describe offsets between some generic effects."
      Label="Effects Sync"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BeamShaper"
      Pretty="Beam Shaper"
      ActivationGroup="BeamShaper"
      Feature="Beam.Beam"
      Definition="Activates fixture's beam shaper."
      Explanation="Use this attribute to describe beam shaper function of the device."
      Label="Beam Shaper"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <SubPhysicalUnit
      Type="RatioHorizontal"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the size of the beam compared to the original size."/>
    <SubPhysicalUnit
      Type="RatioVertical"
      PhysicalUnit="Percent"
      PhysicalFrom="100"
      PhysicalTo="100"
      Description="This defines the size of the beam compared to the original size."/>
    <Attribute
      Name="BeamShaperMacro"
      Pretty="Beam Shaper Macro"
      ActivationGroup="BeamShaper"
      Feature="Beam.Beam"
      Definition="Predefined presets for fixture's beam shaper positions."
      Explanation="Use this attribute to describe predefined macros of the beam shaper function of the device."
      Label="Beam Shaper Macro"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BeamShaperPos"
      Pretty="Beam Shaper &lt;&gt;"
      ActivationGroup="BeamShaper"
      Feature="Beam.Beam"
      PhysicalUnit="Angle"
      Definition="Indexing of fixture's beam shaper."
      Explanation="Use this attribute to describe indexing of the beam shaper function of the device."
      Label="Beam Shaper Pos"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BeamShaperPosRotate"
      Pretty="Beam Shaper Rotate"
      ActivationGroup="BeamShaper"
      Feature="Beam.Beam"
      PhysicalUnit="AngularSpeed"
      Definition="Continuous rotation of fixture's beam shaper."
      Explanation="Use this attribute to describe spinning/rotation of the beam shaper function of the device."
      Label="Beam Shaper Pos Rotate"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Zoom"
      Pretty="Zoom"
      Feature="Focus.Focus"
      PhysicalUnit="Angle"
      Definition="Controls the spread of the fixture's beam/spot."
      Explanation="This attribute is used to adjust the beam angle of the light source."
      Label="Zoom"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ZoomModeSpot"
      Pretty="Zoom Spot"
      Feature="Focus.Focus"
      PhysicalUnit="Angle"
      Definition="Selects spot mode of zoom."
      Explanation="On devices with a Zoom which can be set to various types of projections, use this attribute to describe a Zoom mode with a flat projection field definition."
      Label="Zoom Mode Spot"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ZoomModeBeam"
      Pretty="Zoom Beam"
      Feature="Focus.Focus"
      PhysicalUnit="Angle"
      Definition="Selects beam mode of zoom."
      Explanation="On devices with a Zoom which can be set to various types of projections, use this attribute to describe a Zoom mode with a beamy, hot-spoty type of projection."
      Label="Zoom Mode Beam"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="DigitalZoom"
      Pretty="DZoom"
      Feature="Focus.Focus"
      PhysicalUnit="Angle"
      Definition="Controls the image size within the defined projection. Used on digital projection based devices"
      Explanation="Use this to describe a zoom of for example a digital projector, where the image changes size but the beam angle remains the same."
      Label="Digital Zoom"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Focus(n)"
      Pretty="Focus(n)"
      Feature="Focus.Focus"
      Definition="Controls the sharpness of the fixture's spot light. Can blur or sharpen the edge of the spot."
      Explanation="Use this attribute to describe the sharpening/focusing function of the device. Some may call it the Edge."
      Label="Focus"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Focus(n)Adjust"
      Pretty="Focus(n) Adjust"
      Feature="Focus.Focus"
      Definition="Autofocuses functionality using presets."
      Explanation="Use this attribute to describe a function which sets some parameters or behaviors that make the optical system of the device to automatically keep the projection focused."
      Label="Focus Adjust"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Focus(n)Distance"
      Pretty="Focus(n) Distance"
      Feature="Focus.Focus"
      PhysicalUnit="Length"
      Definition="Autofocuses functionality using distance."
      Explanation="Use this attribute to describe a function which sets a distance at which the optical system of the device will automatically keep the projection focused."
      Label="Focus Distance"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Control(n)"
      Pretty="Ctrl(n)"
      Feature="Control.Control"
      Definition="Controls the channel of a fixture."
      Explanation="Use this attribute do describe a function (typically a DMX channel) which provides access to settings and to controls allowing changes of the behavior of the device, like striking and dousing of the lamp and so on. These individual settings or for example lamp controls are then described by their specific attributes. If there is more than one control channel the wild-card (n) will be incremented and the number then indicates which control channel will be controlled."
      Label="Control"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="DimmerMode"
      Pretty="Dim Mode"
      Feature="Control.Control"
      Definition="Selects different modes of intensity."
      Explanation="Switching between different types of dimming modes is described with this attribute."
      Label="Dimmer Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="DimmerCurve"
      Pretty="Dim Curve"
      Feature="Control.Control"
      Definition="Selects different dimmer curves of the fixture."
      Explanation="Switching between different types of dimming curves provided by the device is described with this attribute."
      Label="Dimmer Curve"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BlackoutMode"
      Pretty="Blackout Mode"
      Feature="Control.Control"
      Definition="Close the light output under certain conditions (movement correction, gobo movement, etc.)."
      Explanation="If the device provides a way to disable light output when gobo, color or other elements are moving or when for example movement position is being restored after external manual intervention, use this attribute to describe this behavior/settings."
      Label="Blackout Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="LEDFrequency"
      Pretty="LED Frequency"
      Feature="Control.Control"
      PhysicalUnit="Frequency"
      Definition="Controls LED frequency."
      Explanation="Use this attribute to describe a function which allows to change frequency of LEDs."
      Label="LED Frequency"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="LEDZoneMode"
      Pretty="LED Zone Mode"
      Feature="Control.Control"
      Definition="Changes zones of LEDs."
      Explanation="For multipixel LED devices that allow to choose which zones of LEDs are being used, use this attribute to describe this function."
      Label="LED Zone Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PixelMode"
      Pretty="Pixel Mode"
      Feature="Control.Control"
      Definition="Controls behavior of LED pixels."
      Explanation="For multipixel devices that allow to set behavior of pixel control (for example order of LEDs), use this attribute to describe such behavior/settings."
      Label="Pixel Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PanMode"
      Pretty="Pan Mode"
      Feature="Control.Control"
      Definition="Selects fixture's pan mode. Selects between a limited pan range (e.g. -270 to 270) or a continuous pan range."
      Explanation="For devices that allow different modes of pan behavior, use this attribute to describe the behavior."
      Label="Pan Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="TiltMode"
      Pretty="Tilt Mode"
      Feature="Control.Control"
      Definition="Selects fixture's pan mode. Selects between a limited tilt range (e.g. -130 to 130) or a continuous tilt range."
      Explanation="For devices that allow different modes of tilt behavior, use this attribute to describe the behavior."
      Label="Tilt Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PanTiltMode"
      Pretty="PanTilt Mode"
      Feature="Control.Control"
      Definition="Selects fixture's pan/tilt mode. Selects between a limited pan/tilt range or a continuous pan/tilt range."
      Explanation="For devices that allow different modes of behavior of pan and tilt, use this attribute to describe the behavior."
      Label="Pan Tilt Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PositionModes"
      Pretty="Pos Modes"
      Feature="Control.Control"
      Definition="Selects the fixture's position mode."
      Explanation="For devices that allow different modes of behavior of their positioning system, use this attribute to describe the behavior."
      Label="Position Modes"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Gobo(n)WheelMode"
      Pretty="G(n) Mode"
      Feature="Control.Control"
      Definition="Changes control between selecting, indexing, and rotating the gobos of gobo wheel (n)."
      Explanation="This attribute describes selecting, indexing, and rotating of gobos in a gobo wheel (n)."
      Label="Gobo Wheel Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="GoboWheelShortcutMode"
      Pretty="Gobo Shortcut Mode"
      Feature="Control.Control"
      Definition="Defines whether the gobo wheel takes the shortest distance between two positions."
      Explanation="This attribute describes whether the gobo wheel takes the shortest distance between two positions."
      Label="Gobo Wheel Shortcut Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationWheel(n)Mode"
      Feature="Control.Control"
      Pretty="Anim Mode"
      Definition="Changes control between selecting, indexing, and rotating the slots of animation wheel (n)."
      Explanation="This attribute describes selecting, indexing, and rotating of slots in an animation wheel (n)."
      Label="Animation Wheel Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationWheelShortcutMode"
      Pretty="Anim Shortcut Mode"
      Feature="Control.Control"
      Definition="Defines whether the animation wheel takes the shortest distance between two positions."
      Explanation="This attribute describes whether the animation wheel takes the shortest distance between two positions."
      Label="Animation Wheel Shortcut Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Color(n)Mode"
      Pretty="C(n) Mode"
      Feature="Control.Control"
      Definition="Changes control between selecting, continuous selection, half selection, random selection, color spinning, etc. in colors of color wheel (n)."
      Explanation="This attribute describes between selecting, continuous selection, half selection, random selection, color spinning, etc. of colors in a color wheel (n)."
      Label="Color Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorWheelShortcutMode"
      Pretty="Color Wheel Shortcut Mode"
      Feature="Control.Control"
      Definition="Defines whether the color wheel takes the shortest distance between two colors."
      Explanation="This attribute describes whether the color wheel takes the shortest distance between two colors."
      Label="Color Wheel Shortcut Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CyanMode"
      Pretty="Cyan Mode"
      Feature="Control.Control"
      Definition="Controls how Cyan is used within the fixture's cyan CMY-mixing feature."
      Explanation="Use this attribute to describe the mode of operation of the Cyan."
      Label="Cyan Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="MagentaMode"
      Pretty="Magenta Mode"
      Feature="Control.Control"
      Definition="Controls how Magenta is used within the fixture's magenta CMY-mixing."
      Explanation="Use this attribute to describe the mode of operation of the Magenta."
      Label="Magenta Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="YellowMode"
      Pretty="Yellow Mode"
      Feature="Control.Control"
      Definition="Controls how Yellow is used within the fixture's yellow CMY-mixing feature."
      Explanation="Use this attribute to describe the mode of operation of the Yellow."
      Label="Yellow Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorMixMode"
      Pretty="Color Mix Mode"
      Feature="Control.Control"
      Definition="Changes control between selecting continuous selection, half selection, random selection, color spinning, etc. in color mixing."
      Explanation="For devices, that allow setting of mode of operation or relationship of elements of the color mixing system of the fixture, for example color wheel selection modes, or additive/subtractive/... relationship of color mixing systems within the fixture. "
      Label="Color Mix Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ChromaticMode"
      Pretty="Chroma Mode"
      Feature="Control.Control"
      Definition="Selects chromatic behavior of the device."
      Explanation="Use this attribute to describe a function that defines if CCT related channels (CTC, CTO, CTB...) influence only white colors or whether CCT is applied also to mixed colors."
      Label="Chromatic Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorCalibrationMode"
      Pretty="CCalib Mode"
      Feature="Control.Control"
      Definition="Sets calibration mode (for example on/off)."
      Explanation="Use this attribute to describe a feature that enable or disable color calibrations of the device."
      Label="Color Calibration Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorConsistency"
      Pretty="Color consistency"
      Feature="Control.Control"
      Definition="Controls consistent behavior of color."
      Explanation="Some devices allow to eliminate inconsistencies of color mixing output due to intensity drop caused by thermal management. In devices that allow to enable/disable internal color consistency setting, use this attribute to describe a such function."
      Label="Color Consistency"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorControl"
      Pretty="Color Ctrl"
      Feature="Control.Control"
      Definition="Controls special color related functions."
      Explanation="Use this to describe some color related control functions of the device."
      Label="Color Control"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorModelMode"
      Pretty="ColorModel"
      Feature="Control.Control"
      Definition="Controls color model (CMY/RGB/HSV...)."
      Explanation="In devices that have a function to allow switching between various ways of color mixing (CMY, RGB, HSV...), this attribute is used to describe this function."
      Label="Color Model Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorSettingsReset"
      Pretty="Color Ctrl Rst"
      Feature="Control.Control"
      Definition="Resets settings of color control channel."
      Explanation="Use this attribute to describe a function which allows to set various color related settings back to the default state."
      Label="Color Settings Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorUniformity"
      Pretty="ColorUniform"
      Feature="Control.Control"
      Definition="Controls behavior of color uniformity."
      Explanation="In devices that allow to set a color uniformity between multiple fixtures use this attribute to describe a such function."
      Label="Color Uniformity"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CRIMode"
      Pretty="CRI Mode"
      Feature="Control.Control"
      Definition="Controls CRI settings of output."
      Explanation="Use this attribute to describe a function that allows to choose a color mixing mode which is prioritizing higher Color Rendering Index."
      Label="CRI Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CustomColor"
      Pretty="Custom Color"
      Feature="Control.Control"
      Definition="Custom color related functions (save, recall..)."
      Explanation="Use this attribute to describe a function that allows to save a custom color into the lighting device."
      Label="Custom Color"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="UVStability"
      Pretty="UV Stab"
      Feature="Control.Control"
      Definition="Settings for UV stability color behavior."
      Explanation="Use this attribute to describe a function that allows to choose a color mixing mode which is prioritizing color stability and suppresses UV color."
      Label="UV Stability"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="WavelengthCorrection"
      Pretty="Wavelength"
      Feature="Control.Control"
      Definition="Settings for Wavelength correction of colors."
      Explanation="Use this attribute to describe a function that allows to adjust color mixing according to corresponding wavelengths in order to achieve same colors from multiple fixtures."
      Label="Wave Length Correction"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="WhiteCount"
      Pretty="White Count"
      Feature="Control.Control"
      Definition="Controls if White LED is proportionally added to RGB."
      Explanation="Some devices allow internal automatic intensity control of White LED  by the device, based on proportions of intensity of remaining LED emitters. Use this attribute to describe this behavior."
      Label="White Count"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="StrobeMode"
      Pretty="Strobe Mode"
      Feature="Control.Control"
      Definition="Changes strobe style - strobe, pulse, random strobe, etc. - of the shutter attribute."
      Explanation="Use this attribute to describe strobe, pulse, random strobe and other modes of the shutter attribute."
      Label="Strobe Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ZoomMode"
      Pretty="Zoom Mode"
      Feature="Control.Control"
      Definition="Changes modes of the fixture´s zoom."
      Explanation="Use this to describe the possibility to set different zoom modes, like beam mode or a spot mode."
      Label="Zoom Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FocusMode"
      Pretty="Focus Mode"
      Feature="Control.Control"
      Definition="Changes modes of the fixture’s focus - manual or auto- focus."
      Explanation="Use this to describe a function that allows to change the mode of the focus."
      Label="Focus Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="IrisMode"
      Pretty="Iris Mode"
      Feature="Control.Control"
      Definition="Changes modes of the fixture’s iris - linear, strobe, pulse."
      Explanation="Use this to describe a function that allows to change the mode of the iris."
      Label="Iris Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FanMode"
      Pretty="Fan Mode"
      Feature="Control.Control"
      Definition="Controls fan (n) mode."
      Explanation="Use this attribute to switch between different types of fan control modes (for example auto, high, silent)."
      Label="Fan Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FollowSpotMode"
      Pretty="FollowSpot Mode"
      Feature="Control.Control"
      Definition="Selects follow spot control mode."
      Explanation="For fixtures that allow remote enabling/disabling various types of follow spot related features, use this attribute to describe the behavior. "
      Label="Follow Spot Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BeamEffectIndexRotateMode"
      Pretty="Beam Effect Index Rotate Mode"
      Feature="Control.Control"
      Definition="Changes mode to control either index or rotation of the beam effects."
      Explanation="Use this to describe a function that allows to change the mode of operation of beam effects."
      Label="Beam Effect Index Rotate Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="IntensityMSpeed"
      Pretty="Intensity MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's intensity."
      Explanation="Use this attribute to set a speed of dimming behavior. "
      Label="Intensity Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PositionMSpeed"
      Pretty="Pos MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's pan/tilt."
      Explanation="Use this attribute to set a speed of movement for pan/tilt."
      Label="Position Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorMixMSpeed"
      Pretty="Color Mix MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's ColorMix presets."
      Explanation="Use this attribute to set a speed of movement for color mixing elements."
      Label="Color Mix Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorWheelSelectMSpeed"
      Pretty="Color Wheel Select MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's color wheel."
      Explanation="Use this attribute to set a speed of movement of color wheel(s)."
      Label="Color Wheel Select Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="GoboWheel(n)MSpeed"
      Pretty="Gobo Wheel(n) MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's gobo wheel (n)."
      Explanation="Use this attribute to set a speed of movement of color wheel(s). If there is more than one gobo wheel the wild-card (n) will be incremented and the number then indicates which wheel will be controlled."
      Label="Gobo Wheel Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="IrisMSpeed"
      Pretty="Iris MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's iris."
      Explanation="Use this attribute to set a speed of movement of iris(s)."
      Label="Iris Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Prism(n)MSpeed"
      Pretty="Prism(n) MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's prism wheel (n)."
      Explanation="Use this attribute to set a speed of movement of prism(s). If there is more than one prism or prism wheel the wild-card (n) will be incremented and the number then indicates which prism/wheel will be controlled."
      Label="Prism Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FocusMSpeed"
      Pretty="Focus MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's focus."
      Explanation="Use this attribute to set a speed of movement of focus."
      Label="Focus Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Frost(n)MSpeed"
      Pretty="Frost(n) MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's frost (n)."
      Explanation="Use this attribute to set a speed of movement of frost. If there is more than one frost the wild-card (n) will be incremented and the number then indicates which frost will be controlled."
      Label="Frost Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ZoomMSpeed"
      Pretty="Zoom MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's zoom."
      Explanation="Use this attribute to set a speed of movement of zoom."
      Label="Zoom Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FrameMSpeed"
      Pretty="Frame MSpeed"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's shapers."
      Explanation="Use this attribute to set a speed of movement of framing."
      Label="Frame Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="GlobalMSpeed"
      Pretty="Global MSpeed"
      Feature="Control.Control"
      Definition="General speed of fixture's features."
      Explanation="Use this attribute to set a speed of movement which is used on elements of the device."
      Label="Global M Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ReflectorAdjust"
      Pretty="Reflector Adj"
      Feature="Control.Control"
      Definition="Movement speed of the fixture's frost."
      Explanation="Adjustment of the reflector of the device (for example setting it to a hot-spot output or a flat-field output) is described with this attribute."
      Label="Reflector Adjust"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FixtureGlobalReset"
      Pretty="Fixture Global Reset"
      Feature="Control.Control"
      Definition="Generally resets the entire fixture."
      Explanation="This attribute is describing a function that allows the operator to trigger a complete internal reset of the fixture."
      Label="Fixture Global Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="DimmerReset"
      Pretty="Dimmer Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's dimmer."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's dimmer, dimmer flags or other dimming elements."
      Label="Dimmer Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ShutterReset"
      Pretty="Shutter Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's shutter."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's shutter flags or elements."
      Label="Shutter Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BeamReset"
      Pretty="Beam Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's beam features."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's beam lenses or elements."
      Label="Beam Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorMixReset"
      Pretty="Color Mix Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's color mixing system."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's color mixing system."
      Label="Color Mix Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ColorWheelReset"
      Pretty="Color Wheel Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's color wheel."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's color wheels."
      Label="Color Wheel Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FocusReset"
      Pretty="Focus Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's focus."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's framing shutter or focus lenses or elements."
      Label="Focus Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FrameReset"
      Pretty="Frame Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's shapers."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's framing shutter or framing elements."
      Label="Frame Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="GoboWheelReset"
      Pretty="G Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's gobo wheel."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's gobo wheels."
      Label="Gobo Wheel Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="IntensityReset"
      Pretty="Intensity Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's intensity."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's intensity"
      Label="Intensity Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="IrisReset"
      Pretty="Iris Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's iris."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's iris."
      Label="Iris Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PositionReset"
      Pretty="Pos Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's pan/tilt."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's positional system"
      Label="Position Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="PanReset"
      Pretty="Pan Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's pan."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's pan."
      Label="Pan Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="TiltReset"
      Pretty="Tilt Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's tilt."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's tilt."
      Label="Tilt Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ZoomReset"
      Pretty="Zoom Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's zoom."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's zoom lenses or elements."
      Label="Zoom Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CTBReset"
      Pretty="CTB Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's CTB."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's CTB flags or elements."
      Label="CTB Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CTOReset"
      Pretty="CTO Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's CTO."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's CTO flags or elements."
      Label="CTO Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="CTCReset"
      Pretty="CTC Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's CTC."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's CTC flags or elements."
      Label="CTC Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="AnimationSystemReset"
      Pretty="Anim Sytem Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's animation system features."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's animation wheels or elements."
      Label="Animation System Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FixtureCalibrationReset"
      Pretty="Fixture Calibration Reset"
      Feature="Control.Control"
      Definition="Resets the fixture's calibration."
      Explanation="This attribute is describing a function that allows the operator to trigger an internal reset of the fixture's calibrations."
      Label="Fixture Calibration Reset"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Function"
      Pretty="Function"
      Feature="Control.Control"
      Definition="Generally controls features of the fixture."
      Explanation="If you cannot find other attribute that would describe a feature of the Power/Control channel, use this generic attribute."
      Label="Function"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="LampControl"
      Pretty="Lamp Ctrl"
      Feature="Control.Control"
      Definition="Controls the fixture's lamp on/lamp off feature."
      Explanation="Use this attribute to describe functionality that allows to strike and douse the lamp of the fixture."
      Label="Lamp Control"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="DisplayIntensity"
      Pretty="Display Int"
      Feature="Control.Control"
      Definition="Adjusts intensity of display"
      Explanation="For fixtures with the possibility to adjust the brightness of their menu display screen, use this attribute to describe such functionality."
      Label="Display Intensity"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="DMXInput"
      Pretty="DMX Input"
      Feature="Control.Control"
      Definition="Selects DMX Input"
      Explanation="Use this attribute to describe behavior that allows changing the source of the DMX signal. "
      Label="DMX Input"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="NoFeature"
      Pretty="NoFeature"
      Feature="Control.Control"
      Definition="Ranges without a functionality."
      Explanation="Use this attribute for functions that do not define any functions. They might be for example reserved for later use."
      Label="No Feature"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Dummy"
      Pretty="Dummy"
      Feature="Control.Control"
      Definition="Ranges without a functionality."
      Explanation="Use this attribute for functions that do not define any functions. They might be for example reserved for later use."
      Label="Dummy"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Blower(n)"
      Pretty="Blower(n)"
      Feature="Control.Control"
      Definition="Fog or hazer‘s blower feature."
      Explanation="Use this attribute to describe a blower function."
      Label="Blower"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Fan(n)"
      Pretty="Fan(n)"
      Feature="Control.Control"
      Definition="Fog or hazer's Fan feature."
      Explanation="Use this to describe a function that controls a fan of a device."
      Label="Fan"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Fog(n)"
      Pretty="Fog(n)"
      Feature="Control.Control"
      Definition="Fog or hazer's Fog feature."
      Explanation="A function that controls fog/haze function of a fog machine."
      Label="Fog"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Haze(n)"
      Pretty="Haze(n)"
      Feature="Control.Control"
      Definition="Fog or hazer's Haze feature."
      Explanation="A function that controls fog/haze function of a haze machine."
      Label="Haze"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="LampPowerMode"
      Pretty="Lamp Power Mode"
      Feature="Control.Control"
      Definition="Controls the energy consumption of the lamp."
      Explanation="For devices that allow to set different lamp modes (Low Power mode, Eco mode...), use this attribute to describe this function."
      Label="Lamp Power Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Fans"
      Pretty="Fans"
      Feature="Control.Control"
      Definition="Controls a fixture or device fan."
      Explanation="For devices that allow to set a fan speed, use this attribute to describe this function."
      Label="Fans"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Blade(n)A"
      Pretty="Blade(n)A"
      ActivationGroup="Shaper"
      Feature="Shapers.Shapers"
      Definition="1 of 2 shutters that shape the top/right/bottom/left of the beam."
      Explanation="Use this attribute to describe framing shutters or barndoors of the device. When only the Blade(n)A is used, it is controlling insertion of the complete framing shutter by moving the long edge. Eventual rotation of this edge is controlled by Blade(n)Rot attribute. If both Blade(n)A and Blade(n)B are used, the Blade(n)A is controlling one corner and the Blade(n)B is controlling the second corner of the framing shutter, thus together these attributes are controlling the insertion and rotation at the same time. Use the (n) enumerator to set correct blade - when looking at the projection, 1 is bottom (from positive to negative values in Y axis), 2 is left (from negative to positive values on the X axis), 3 is top (from negative to positive values on the Y axis) and 4 is right (from positive to negative values on the X axis). (When looking into the device lens, 1 is top, 2 is left, 3 is bottom, 4 is right). The physical values describe the amount of insertion, where at 0 the blade is completely out of the beam and at 1 the blade is fully covering the diameter of the beam."
      Label="Blade A"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Blade(n)B"
      Pretty="Blade(n)B"
      ActivationGroup="Shaper"
      Feature="Shapers.Shapers"
      Definition="2 of 2 shutters that shape the top/right/bottom/left of the beam."
      Explanation="Use this attribute to describe framing shutters or barndoors of the device in which the framing shutter is controlled by adjusting it's corners. This Blade(n)B is used in conjunction with the Blade(n)A attribute, where the Blade(n)A is controlling one corner and the Blade(n)B is controlling the second corner of the framing shutter, thus together these attributes are controlling the insertion and rotation at the same time. Use the (n) enumerator to set correct blade - when looking at the projection, 1 is bottom (from positive to negative values in Y axis), 2 is left (from negative to positive values on the X axis), 3 is top (from negative to positive values on the Y axis) and 4 is right (from positive to negative values on the X axis). (When looking into the device lens, 1 is top, 2 is left, 3 is bottom, 4 is right). The physical values describe the amount of insertion, where at 0 the blade is completely out of the beam and at 1 the blade is fully covering the diameter of the beam."
      Label="Blade B"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Blade(n)Rot"
      Pretty="Blade(n) Rot"
      ActivationGroup="Shaper"
      Feature="Shapers.Shapers"
      PhysicalUnit="Angle"
      Definition="Rotates position of blade(n)."
      Explanation="Use this attribute to describe rotation of the blades of framing shutters or barndoors. Use the (n) enumerator to set correct blade, when looking at the projection, 1 is bottom, 2 is left, 3 is top and 4 is right. (When looking into the device lens, 1 is top, 2 is left, 3 is bottom, 4 is right)."
      Label="Blade Rot"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ShaperRot"
      Pretty="Shaper Rot"
      ActivationGroup="Shaper"
      Feature="Shapers.Shapers"
      PhysicalUnit="Angle"
      Definition="Rotates position of blade assembly."
      Explanation="This attribute allows you to describe a function which rotates the complete carousel of framing shutters or barndors."
      Label="Shaper Rot"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ShaperMacros"
      Pretty="Shaper Macros"
      Feature="Shapers.Shapers"
      Definition="Predefined presets for shaper positions."
      Explanation="This attribute allows for selecting a fixture's predefined macro functions for the Blades/Shapers."
      Label="Shaper Macros"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="ShaperMacrosSpeed"
      Pretty="Shaper Macros Speed"
      Feature="Shapers.Shapers"
      Definition="Speed of predefined effects on shapers."
      Explanation="Use this attribute to control the speed of effects of shapers"
      Label="Shaper Macros Speed"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BladeSoft(n)A"
      Pretty="BladeS(n)A"
      Feature="Shapers.Shapers"
      PhysicalUnit="None"
      Definition="1 of 2 soft edge blades that shape the top/right/bottom/left of the beam."
      Explanation="Use this attribute to describe soft edge framing shutters or barndoors of the device. When only the Blade(n)A is used, it is controlling insertion of the complete framing shutter by moving the long edge. If both Blade(n)A and Blade(n)B are used, the Blade(n)A is controlling one corner and the Blade(n)B is controlling the second corner of the framing shutter. Use the (n) enumerator to set correct blade - when looking at the projection, 1 is bottom (from positive to negative values in Y axis), 2 is left (from negative to positive values on the X axis), 3 is top (from negative to positive values on the Y axis) and 4 is right (from positive to negative values on the X axis). (When looking into the device lens, 1 is top, 2 is left, 3 is bottom, 4 is right). The physical values describe the amount of insertion, where at 0 the blade is completely out of the beam and at 1 the blade is fully covering the diameter of the beam."
      Label="Blade Soft A"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="BladeSoft(n)B"
      Pretty="BladeS(n)B"
      Feature="Shapers.Shapers"
      PhysicalUnit="None"
      Definition="2 of 2 soft edge blades that shape the top/right/bottom/left of the beam."
      Explanation="Use this attribute to describe soft edge framing shutters or barndoors of the device in which the framing shutter in controlled by adjusting it's corners. This Blade(n)B is used in conjunction with the Blade(n)A attribute, where the Blade(n)A is controlling one corner and the Blade(n)B is controlling the second corner of the framing shutter. Use the (n) enumerator to set correct blade - when looking at the projection, 1 is bottom (from positive to negative values in Y axis), 2 is left (from negative to positive values on the X axis), 3 is top (from negative to positive values on the Y axis) and 4 is right (from positive to negative values on the X axis). (When looking into the device lens, 1 is top, 2 is left, 3 is bottom, 4 is right). The physical values describe the amount of insertion, where at 0 the blade is completely out of the beam and at 1 the blade is fully covering the diameter of the beam."
      Label="Blade Soft B"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="KeyStone(n)A"
      Pretty="KS(n)A"
      Feature="Shapers.Shapers"
      PhysicalUnit="None"
      Definition="1 of 2 corners that shape the top/right/bottom/left of the beam."
      Explanation="This attribute describes a behavior typically used on video projection, to adjust parallax correction."
      Label="Key Stone A"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="KeyStone(n)B"
      Pretty="KS(n)B"
      Feature="Shapers.Shapers"
      PhysicalUnit="None"
      Definition="2 of 2 corners that shape the top/right/bottom/left of the beam."
      Explanation="This attribute describes a behavior typically used on video projection, to adjust parallax correction."
      Label="Key Stone B"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="Video"
      Pretty="Video"
      Feature="Video.Video"
      Definition="Controls video features."
      Explanation="Use this attribute to describe generic functions related to video controls."
      Label="Video"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoEffect(n)Type"
      Pretty="Video Effect(n) Type"
      Feature="Video.Video"
      Definition="Selects dedicated effects which are used for media."
      Explanation="Use this attribute to describe generic video effects."
      Label="Video Effect Type"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoEffect(n)Parameter(m)"
      Pretty="Video Effect(n) Parameter(m)"
      Feature="Video.Video"
      Definition="Controls parameter (m) of VideoEffect(n)Type."
      Explanation="Use this attribute to describe generic video effects parameters."
      Label="Video Effect Parameter"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoCamera(n)"
      Pretty="Video Camera(n)"
      Feature="Video.Video"
      Definition="Selects the video camera(n)."
      Explanation="Use this attribute to describe features related to a video camera."
      Label="Video Camera"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoSoundVolume(n)"
      Pretty="Volume(n)"
      Feature="Video.Video"
      PhysicalUnit="Percent"
      Definition="Adjusts sound volume."
      Explanation="Describes the audio volume function of a device."
      Label="Video Sound Volume"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="VideoBlendMode"
      Pretty="BlendMode"
      Feature="Video.Video"
      PhysicalUnit="None"
      Definition="Defines mode of video blending."
      Explanation="Use this attribute to describe a function that allows to choose a mode of blending of a video output."
      Label="Video Blend Mode"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="InputSource"
      Pretty="ISrc"
      Feature="Video.Video"
      PhysicalUnit="None"
      Definition="Defines media input source e.g. a camera input."
      Explanation="This attribute allows to set a video input source."
      Label="Input Source"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
    <Attribute
      Name="FieldOfView"
      Pretty="FOV"
      Feature="Video.Video"
      PhysicalUnit="Angle"
      Definition="Defines field of view."
      Explanation="Use this attribute to describe features controlling field of view of video projection."
      Label="Field Of View"
      UseEmitter="False"
      UseFilter="False"
      UseWheel="False"
      UseWheelSlot="False"
      UseGamut="False"
      UseColorSpace="False"/>
  </Attributes>
</AttributeDefinitions>
```

Example for enumeration:

```
   <Attribute Name="Gobo1" Pretty="G1" ActivationGroup="Gobo1" Feature="Gobo.Gobo" />  
   <Attribute Name="Gobo2" Pretty="G2" ActivationGroup="Gobo2" Feature="Gobo.Gobo" />
```


## Annex C (informative) Name character table

Names are UTF-8 literals. In the first 128 characters only use
characters listed below. All characters above `127` are available.

<div id="table-c1">

##### Table C1. *UTF-8 table*

| Unicode code point | Character | UTF-8 (dec.) | Name                   |
| ------------------ | --------- | ------------ | ---------------------- |
| U+0020             |           | 32           | SPACE                  |
| U+0022             | `"`       | 34           | QUOTATION MARK         |
| U+0023             | `#`       | 35           | NUMBER SIGN            |
| U+0025             | %         | 37           | PERCENT SIGN           |
| U+0027             | '         | 39           | APOSTROPHE             |
| U+0028             | (         | 40           | LEFT PARENTHESIS       |
| U+0029             | )         | 41           | RIGHT PARENTHESIS      |
| U+002A             | `*`       | 42           | ASTERISK               |
| U+002B             | \+        | 43           | PLUS SIGN              |
| U+002D             | \-        | 45           | HYPHEN-MINUS           |
| U+002F             | /         | 47           | SOLIDUS                |
| U+0030             | 0         | 48           | DIGIT ZERO             |
| U+0031             | 1         | 49           | DIGIT ONE              |
| U+0032             | 2         | 50           | DIGIT TWO              |
| U+0033             | 3         | 51           | DIGIT THREE            |
| U+0034             | 4         | 52           | DIGIT FOUR             |
| U+0035             | 5         | 53           | DIGIT FIVE             |
| U+0036             | 6         | 54           | DIGIT SIX              |
| U+0037             | 7         | 55           | DIGIT SEVEN            |
| U+0038             | 8         | 56           | DIGIT EIGHT            |
| U+0039             | 9         | 57           | DIGIT NINE             |
| U+003A             | `:`       | 58           | COLON                  |
| U+003B             | `;`       | 59           | SEMICOLON              |
| U+003C             | \<        | 60           | LESS-THAN SIGN         |
| U+003D             | \=        | 61           | EQUALS SIGN            |
| U+003E             | \>        | 62           | GREATER-THAN SIGN      |
| U+0040             | @         | 64           | COMMERCIAL AT          |
| U+0041             | A         | 65           | LATIN CAPITAL LETTER A |
| U+0042             | B         | 66           | LATIN CAPITAL LETTER B |
| U+0043             | C         | 67           | LATIN CAPITAL LETTER C |
| U+0044             | D         | 68           | LATIN CAPITAL LETTER D |
| U+0045             | E         | 69           | LATIN CAPITAL LETTER E |
| U+0046             | F         | 70           | LATIN CAPITAL LETTER F |
| U+0047             | G         | 71           | LATIN CAPITAL LETTER G |
| U+0048             | H         | 72           | LATIN CAPITAL LETTER H |
| U+0049             | I         | 73           | LATIN CAPITAL LETTER I |
| U+004A             | J         | 74           | LATIN CAPITAL LETTER J |
| U+004B             | K         | 75           | LATIN CAPITAL LETTER K |
| U+004C             | L         | 76           | LATIN CAPITAL LETTER L |
| U+004D             | M         | 77           | LATIN CAPITAL LETTER M |
| U+004E             | N         | 78           | LATIN CAPITAL LETTER N |
| U+004F             | O         | 79           | LATIN CAPITAL LETTER O |
| U+0050             | P         | 80           | LATIN CAPITAL LETTER P |
| U+0051             | Q         | 81           | LATIN CAPITAL LETTER Q |
| U+0052             | R         | 82           | LATIN CAPITAL LETTER R |
| U+0053             | S         | 83           | LATIN CAPITAL LETTER S |
| U+0054             | T         | 84           | LATIN CAPITAL LETTER T |
| U+0055             | U         | 85           | LATIN CAPITAL LETTER U |
| U+0056             | V         | 86           | LATIN CAPITAL LETTER V |
| U+0057             | W         | 87           | LATIN CAPITAL LETTER W |
| U+0058             | X         | 88           | LATIN CAPITAL LETTER X |
| U+0059             | Y         | 89           | LATIN CAPITAL LETTER Y |
| U+005A             | Z         | 90           | LATIN CAPITAL LETTER Z |
| U+005F             | \_        | 95           | LOW LINE               |
| U+0060             | \`        | 96           | GRAVE ACCENT           |
| U+0061             | a         | 97           | LATIN SMALL LETTER A   |
| U+0062             | b         | 98           | LATIN SMALL LETTER B   |
| U+0063             | c         | 99           | LATIN SMALL LETTER C   |
| U+0064             | d         | 100          | LATIN SMALL LETTER D   |
| U+0065             | e         | 101          | LATIN SMALL LETTER E   |
| U+0066             | f         | 102          | LATIN SMALL LETTER F   |
| U+0067             | g         | 103          | LATIN SMALL LETTER G   |
| U+0068             | h         | 104          | LATIN SMALL LETTER H   |
| U+0069             | i         | 105          | LATIN SMALL LETTER I   |
| U+006A             | j         | 106          | LATIN SMALL LETTER J   |
| U+006B             | k         | 107          | LATIN SMALL LETTER K   |
| U+006C             | l         | 108          | LATIN SMALL LETTER L   |
| U+006D             | m         | 109          | LATIN SMALL LETTER M   |
| U+006E             | n         | 110          | LATIN SMALL LETTER N   |
| U+006F             | o         | 111          | LATIN SMALL LETTER O   |
| U+0070             | p         | 112          | LATIN SMALL LETTER P   |
| U+0071             | q         | 113          | LATIN SMALL LETTER Q   |
| U+0072             | r         | 114          | LATIN SMALL LETTER R   |
| U+0073             | s         | 115          | LATIN SMALL LETTER S   |
| U+0074             | t         | 116          | LATIN SMALL LETTER T   |
| U+0075             | u         | 117          | LATIN SMALL LETTER U   |
| U+0076             | v         | 118          | LATIN SMALL LETTER V   |
| U+0077             | w         | 119          | LATIN SMALL LETTER W   |
| U+0078             | x         | 120          | LATIN SMALL LETTER X   |
| U+0079             | y         | 121          | LATIN SMALL LETTER Y   |
| U+007A             | z         | 122          | LATIN SMALL LETTER Z   |
|                    |           |              |                        |


</div>


## Annex D (informative) Predefined Connector Types

Table D.1 table shows the predefined connector types.

<div id="table-d1">

#### Table D1. *Predefined Connector Types*

| Type             | Description                |
| ---------------- | -------------------------- |
| Bare End         | Bare Ends cable            |
| BNC              | BNC connector              |
| TBLK             | Tag block                  |
| TAG              | Solder tag                 |
| KRN              | Krone block                |
| STJ              | Stereo jack                |
| MSTJ             | Mini stereo jack           |
| RCA              | Phono connector            |
| SCART            | SCART connector            |
| SVIDEO           | 4-pin mini-DIN             |
| MDIN4            | 4-pin mini-DIN             |
| MDIN5            | 5-pin mini-DIN             |
| MDIN6            | 6-pin mini-DIN             |
| XLR3             | 3-pin XLR                  |
| XLR4             | 4-pin XLR                  |
| XLR5             | 5-pin XLR                  |
| RJ45             | 10/100 BaseT ethernet type |
| XLRRJ45          | 10/100 BaseT ethernet type |
| RJ11             | Telephone type             |
| DB9              | 9-pin D-type               |
| DB15             | 15-pin D-type              |
| DB25             | 25-pin D-type              |
| DB37             | 37-pin D-type              |
| DB50             | 50-pin D-type              |
| HD15             | 15-pin D-type hi-density   |
| HD25             | 25-pin D-type hi-density   |
| DIN3             | 3-pin DIN                  |
| DIN5             | 5-pin DIN                  |
| EDAC20           | EDAC 20-pin                |
| EDAC38           | EDAC 38-pin                |
| EDAC56           | EDAC 56-pin                |
| EDAC90           | EDAC 90-pin                |
| EDAC120          | EDAC 120-pin               |
| DL96             | DL 96-pin                  |
| SCSI68           | SCSI connector 68-pin      |
| IEE488           | IEE488 connector 36-pin    |
| CENT50           | Centronics 50-pin          |
| CENT36           | Centronics 36-pin          |
| CENT24           | Centronics 24-pin          |
| DisplayPort      | DisplayPort connector      |
| DVI              | DVI connector              |
| HDMI             | HDMI connector             |
| PS2              | PS2 connector              |
| TL-ST            | TosLink connector          |
| LCDUP            | Fiber optic LC DUPLEX-type |
| SCDUP            | Fiber optic SC DUPLEX-type |
| SC               | Fiber optic SC-type        |
| ST               | Fiber optic ST-type        |
| CACOM            | 8-pin LS conn              |
| USB              | USB connector              |
| N-CON            | N connector                |
| F-CON            | F connector                |
| IEC 60320-C7/C8  | Eurostecker                |
| CEE 7/7          | Schutzkontakt              |
| IEC 60320-C13/14 | IEC 60320                  |
| Edison           | Edison                     |
| Wieland          | Wieland                    |
| 16A-CEE-2P       | 16A-Blue                   |
| 16A-CEE-2P-110   | 16A-Yellow                 |
| 16A-CEE          | 16A-CEE                    |
| 32A-CEE          | 32A-CEE                    |
| 32A-CEE-2P       | 32A-Blue                   |
| 32A-CEE-2P-110   | 32A-Yellow                 |
| 63A-CEE          | 63A-CEE                    |
| 125A-CEE         | 125A-CEE                   |
| Powerlock        | Powerlock                  |
| Powerlock 120A   | Powerlock 120A             |
| Powerlock 400A   | Powerlock 400A             |
| Powerlock 660A   | Powerlock 660A             |
| Powerlock 800A   | Powerlock 800A             |
| Camlock          | Camlock                    |
| PowerTwist15     | Power Twist 15A            |
| PowerTwist20     | Power Twist 20A            |
| PowerTwistCBC    | Power Twist CBC            |
| SpeakerTwist2    | Speaker Twist 2            |
| SpeakerTwist4    | Speaker Twist 4            |
| SpeakerTwist8    | Speaker Twist 8            |
| Socapex-16       | Socapex-16                 |
| Socapex-7        | Socapex-7                  |
| Socapex-9        | Socapex-9                  |
| HAN-16           | HAN-16                     |
| HAN-4            | HAN-4                      |
| L6-20            | L6-20                      |
| L15-30           | L15-30                     |
| Stagepin         | Stagepin                   |
| HUBBELL-6-4      | HUBBELL 6-4                |
| DIN 56905        | Eberl                      |
| XLROptical1      | Optical 1 XLR              |
| XLROptical2      | Optical 2 XLR              |
| XLROptical4      | Optical 4 XLR              |
| XLROptical12     | Optical 12 XLR             |
| XLROptical32     | Optical 32 XLR             |
| LK25             | LK-25 8 channel            |
| LK37             | LK-37 12 channel           |
| LK54             | LK-64 16 channel           |
| LK150            | LK-150 48 channel          |
| SDI              | SDI                        |
| DP               | DisplayPort                |
| CACOM-8          | CA-COM 8 pin speaker       |


</div>

## Annex E (normative) Wheel Slot Image Definition

Definition of images used in wheel slots to visualize gobos, animation
wheels or color wheels.

Gobo images shall be in PNG format with an alpha channel. Indexed,
Greyscale and Alpha, 8bit RGB and Alpha, or 16bit RGB and Alpha are
accepted pixel formats.

![Gobo Labeled](media/Gobo_example_labeled.png)

A gobo image is comprised of a transparent Background (1) and the image
itself on top. The Background shall be fully transparent and should be
considered to be the equivalent of a gobo holder. The Image region shall
be fully opaque aside from anti-aliasing, and shall be as large as
possible.

Note 1: This allows a data consumer to determine the precise pixel extents of
the Image and place the provided PNG over an arbitrary GUI background without
additional processing.

The Background region, the equivalent of gobo holder, is defined by full
transparency (Alpha 0). In the Image region, Pure Black (RGB 0,0,0) is
opaque (2), and Pure White (RGB 255,255,255) is transparent (letter A).

Colored gobos (3) shall use an RGB approximation. The RGB approximation
shall be calculated on the basis of Pure White being the CCT of the
fixture light source and the ICC color profile embedded within the PNG.
(See ISO 15076-1:2010) The default shall be sRGB.

## Annex F (normative) SubPhysicalUnit precisions

### Pulse

Some attributes are named "[EFFECT]Pulse" (for example Shutter(n)StrobePulse). They should behave like a triangular function. Here is how they are defined:
- The main PhysicalUnit is a **frequency** which allows to modify the duration of the period T.
- t = 0s corresponds to the activation of the channel function.
- The **TimeOffset** SubPhysicalUnit is the offset of the end of the pulse from 0, the activation of the channel function, as a percentage of the period T.
- The **DutyCycle** SubPhysicalUnit corresponds to the fraction of one period in which the value is not 0.

![Graph of a Pulse-like attribute and their SubPhysicalUnits](media/Pulse.png "Pulse-like attribute and their SubPhysicalUnits")

*Figure 5. Pulse-like attribute and their SubPhysicalUnits*

If there aren't any value given by the user, the TimeOffset and DutyCycle SubPhysicalUnits are defaulted to 100%:

![Graph of a default Pulse-like attribute and their SubPhysicalUnits](media/Pulse\_Default.png "default Pulse-like attribute and their SubPhysicalUnits")

*Figure 6. Default Pulse-like attribute and their SubPhysicalUnits*

### PulseClose

Some attributes are named "[EFFECT]PulseClose" (for example IrisPulseClose). They should behave like a decreasing ramp. Here is how they are defined:
- The main PhysicalUnit is a **frequency** which allows to modify the duration of the period T.
- t = 0s corresponds to the activation of the channel function.
- The **TimeOffset** SubPhysicalUnit is the offset of the end of the pulse from 0, the activation of the channel function, as a percentage of the period T.
- The **DutyCycle** SubPhysicalUnit corresponds to the fraction of one period in which the value is not 0.

![Graph of a PulseClose-like attribute and their SubPhysicalUnits](media/PulseClose.png "PulseClose-like attribute and their SubPhysicalUnits")

*Figure 7. PulseClose-like attribute and their SubPhysicalUnits*

If there aren't any value given by the user, the TimeOffset and DutyCycle SubPhysicalUnits are defaulted to 100%:

![Graph of a default PulseClose-like attribute and their SubPhysicalUnits](media/PulseClose\_Default.png "default PulseClose-like attribute and their SubPhysicalUnits")

*Figure 8. Default PulseClose-like attribute and their SubPhysicalUnits*

### PulseOpen

Some attributes are named "[EFFECT]PulseOpen" (for example Frost(n)PulseOpen). They should behave like an increasing ramp. Here is how they are defined:
- The main PhysicalUnit is a **frequency** which allows to modify the duration of the period T.
- t = 0s corresponds to the activation of the channel function.
- The **TimeOffset** SubPhysicalUnit is the offset of the end of the pulse from 0, the activation of the channel function, as a percentage of the period T.
- The **DutyCycle** SubPhysicalUnit corresponds to the fraction of one period in which the value is not 0.

![Graph of a PulseOpen-like attribute and their SubPhysicalUnits](media/PulseOpen.png "PulseOpen-like attribute and their SubPhysicalUnits")

*Figure 9. PulseOpen-like attribute and their SubPhysicalUnits*

If there aren't any value given by the user, the TimeOffset and DutyCycle SubPhysicalUnits are defaulted to 100%:

![Graph of a default PulseOpen-like attribute and their SubPhysicalUnits](media/PulseOpen\_Default.png "default PulseOpen-like attribute and their SubPhysicalUnits")

*Figure 10. Default PulseOpen-like attribute and their SubPhysicalUnits*

# Annex G. Virtual Channels, Virtual Dimmers, Visual Channels (informative)

[DMX Channel](#user-content-dmx-channel) with Offset of value None becomes a
**Virtual Channel**. Virtual Channel typically does create a control surface
(an encoder) on control desks. It does not produce real world (DMX) output, but
it can have an effect on it's linked Geometry in a visualizer.

A Virtual Channel can contain (multiple)
[Relations](#user-content-relation-collect), for example to color mixing
channels, which creates a **Virtual Dimmer**. See example in [Listing
DMX Mode With Relations](#listing-dmx-mode-with-relations). Through linking to other DMX Channels,
the Virtual Dimmer can have a real world effect.

A Virtual Channel with Logical Channel Attribute set as NoFeature and with
Channel Functions Attributes set to control functions on Geometries linked via
DMX Channel becomes a **Visual Channel**. Visual Channel typically does not
create an encoder in a controller, does not produce real world (DMX) output,
but it can have an effect on it's linked Geometry in a visualizer.

## Annex H. (normative) Blade Attributes Definition

![Blade Attributes Descripton](media/Blade_Attributes_Description.png)

### Blade(n)A

Use this attribute to describe framing shutters or barndoors of the device. Use
only the attribute Blade(n)A, when it is controlling insertion of the complete
framing shutter (n). When looking at the projection from the fixture's point of
view and the beam is in default position (pointing from +Z to -Z axis) then:

Blade(1)A - changing its physical value from 0 to 1 means covering the beam from negative to positive values in Y axis

Blade(2)A - changing its physical value from 0 to 1 means covering the beam from negative to positive values in X axis

Blade(3)A - changing its physical value from 0 to 1 means covering the beam from positive to negative values in Y axis

Blade(4)A - changing its physical value from 0 to 1 means covering the beam from positive to negative values in X axis

The physical values describe the amount of insertion, where at 0 the blade is completely out and at 1 the blade is fully covering the beam.

### Blade(n)B

Use this attribute to describe framing shutters or barndoors of the device in
which the framing shutter is controlled by adjusting its corners. When
attribute Blade(n)B is used together with the Blade(n)A attribute, then
attribute Blade(n)A is controlling the insertion of the first corner (A) and
the attribute Blade(n)B is controlling the insertion of the second corner (B)
of the framing shutter (n). When looking at the projection from the fixture's
point of view and the beam is in default position (pointing from +Z to -Z
axis), the corners A, B are in clockwise order, then:

Blade(1)B - changing its physical value from 0 to 1 means moving of the corner from negative to positive values in Y axis

Blade(2)B - changing its physical value from 0 to 1 means moving of the corner from negative to positive values in X axis

Blade(3)B - changing its physical value from 0 to 1 means moving of the corner from positive to negative values in Y axis

Blade(4)B - changing its physical value from 0 to 1 means moving of the corner from positive to negative values in X axis

The physical values describe movement of a corner, where at 0 the corner is completely out of the beam and at 1 the corner is fully engaged.

### ShaperRot

This attribute allows you to describe a function which rotates the complete
carousel of framing shutters or barndoors. Rotation from negative to positive
angle values is counterclockwise when looking at the projection from the
fixture's point of view.

### Blade(n)Rot

This attribute describes rotation of framing shutters or barndoors controlled
by the Blade(n)A attribute only. Rotation from negative to positive angle
values is counterclockwise when looking at the projection from the fixture's
point of view.