No parking aid on 2011 5008

[nono2lozere]

Hello,
I switched my old monochrome display with a new color MATT display with your can-can bridge, everything works exept parking aid witch is not displayed on MATT. It's not an important feature because I have it on my android radio when I switch to reverse gear but it can be usefull for front radar witch is not displayed on radio.
Is it because I have an aftermarket radio or is it because of MATT settingsin diagbox?
Thanks.

[morcibacsi]

Hi, yes it is because it is not enabled in the MATT.

I have a 5008 as well (from 2012), and I can confirm that it should work.

[nono2lozere]

Thank you, I will try to find a can2010 car to setup it or maybe I will buy another MATT with correct settings.

[morcibacsi]

Thank you, I will try to find a can2010 car to setup it or maybe I will buy another MATT with correct settings.

There will be a next revision of the firmware soon which will support setting these from the application I made the screenshot above. As I remember these settings are hidden from diagbox, and there is no guarantee that another unit will have the setting enabled. If you don't want to wait for the next release, then you can flash this https://github.com/morcibacsi/PSADiag to your device, and use the program above: https://github.com/Barracuda09/PyPSADiag

[nono2lozere]

Thank you, I tried PyPSADiag and now I have parking aid but I lost doors status. Can you tell me what setting to change to re-enable it? Or can you send me csv file with correct option enabled?
If not I can wait for next release because it's not a major feature.
Thank you again

[morcibacsi]

Presence of On-board computer warnings

This is my CSV, but I have an automatic gearbox, this might be different in yours.

2100,FFEDEF575F710E,Telecoding_MATT_2100
0200,DFA000,Telecoding_MATT_0200
2901,FD000000010101,Secure Traceability Value
F080,967376838000299677830880FFFFFFFF0001FFFFFFFF,ZA Zone
F0FE,802C000029EC060C0A02010F06FFFFFF0002000002766499,ZI Zone
F18B,13050B,Production Date
F18C,000125FA,Serial Number

The next version will only have the necessary code from my other project so PyPSADiag can connect to it. So it will make swapping the firmwares on my device unnecessary.

[nono2lozere]

Presence of On-board computer warnings is not enought because I already had it enabled.
But with the telecoding lines from your csv it works! And after unchek some option like automatic transmission or navigation screen I have a perfect setup.

F080,967376838000299805976080FFFFFFFF0001FFFFFFFF,ZA Zone
F0FE,AF42000029EC09080D1200000009080DFE000000FE916244,ZI Zone
F18B,05060E,Production Date
F18C,3030304138413743,Serial Number
2100,CF6DEF135F310E,Telecoding_MATT_2100
0200,DFA000,Telecoding_MATT_0200

I keep the issue open until the next release in case of someone needs it.

PS: off-topic but I have time and external temp on the same page and you have it on separate pages in the video so I think there is different MATT2010 firmware with different layout.

[morcibacsi]

Thanks for the update!

PS: off-topic but I have time and external temp on the same page and you have it on separate pages in the video so I think there is different MATT2010 firmware with different layout.

It might be possible, I haven't seen one which has the two info on the same page. Can you send a picture of the sticker from that MATT2010?

[nono2lozere]

Here are pics of my MATT2010 screens for reference:

And I didn't take pics of sticker because it's a pain in the ass to disassemble dashboard but you have some info in PyPSADiag's csv: