[FEATURE REQUEST]🦄USB Disk support using CH376S chip

[luc-github]

Global FS support Flash and SD, now let's try to add USB Flash disk/key using SPI and CH376s Chip

This library looks very promising https://github.com/djuseeq/Ch376msc
e
Chip is using 3.3 by default but need 5V to power the USB disk
It need to test features , if work as expected then need to implement an abstraction layer for the USB FS and add it to the global FS

[luc-github]

the boards I had were not working - their pinout are different than the one showed in library, not sure what problem was
Not working

Always got Attach flash drive first!

I have ordered new boards and now it is working 🥇
Working one:

Working out of the box

So now can work on abstraction layer ^_^

[mankid-leung]

I have been looking for such device for long time! That's very good! By the way, could you tell me how to wire this device to an ESP devkit or module? ^_^

[luc-github]

I did not finished yet, sorry I am late on this,
you can have a look at https://github.com/djuseeq/Ch376msc, I use SPI wiring, esp32 use 3.3v so wiring is simple, but do not forget to add extra 5V to power the USB for the connected device

[mankid-leung]

I did not finished yet, sorry I am late on this, you can have a look at https://github.com/djuseeq/Ch376msc, I use SPI wiring, esp32 use 3.3v so wiring is simple, but do not forget to add extra 5V to power the USB for the connected device

Got it! Thank you!

[hello2afiq]

if somehow the reason why the above module doesn't work please tell us.

[luc-github]

it is not yet implemented - I was busy with others tasks - that is why feature request is still open