Flameshot Version
Flameshot v14.0.rc1
Installation Type
Using the ready-made package from Github Releases
Operating System type and version
Windows 11 25H2 build 26200.8457
Description
Hello,
I was using version 12.1 without any issues, but after updating to later versions — including the current 13.3.0 and v14.0.rc1 — I noticed a problem when pinning a screenshot. The pinned image shifts downward and to the right, and if it is placed very close to the bottom edge, it ends up partially outside the screen.
I can consistently reproduce this issue when using a 1440p monitor with display scaling set to 125%. When the scaling is set to 100% (recommended), the issue does not occur.
I have attached a YouTube video demonstrating the problem.
Thank you.
Steps to reproduce
1-Set display scaling (zoom) to 125%.
2-Take a screenshot near the bottom-right edge of the screen.
3-Pin the screenshot.
4-The pinned screenshot ends up outside the usable area of the monitor.
Screenshots or screen recordings
https://www.youtube.com/watch?v=5cJIHe2r_k4
System Information
SO: Windows 11 25H2 build 26200.8457
GPU: RTX 5070 Ti
Monitor: LG 32GP850-B 1440P (Zoom 125%)
Config: I have a single monitor setup connected via DisplayPort at 2560×1440 (1440p) resolution with display scaling set to 125%.
Flameshot Version
Flameshot v14.0.rc1
Installation Type
Using the ready-made package from Github Releases
Operating System type and version
Windows 11 25H2 build 26200.8457
Description
Hello,
I was using version 12.1 without any issues, but after updating to later versions — including the current 13.3.0 and v14.0.rc1 — I noticed a problem when pinning a screenshot. The pinned image shifts downward and to the right, and if it is placed very close to the bottom edge, it ends up partially outside the screen.
I can consistently reproduce this issue when using a 1440p monitor with display scaling set to 125%. When the scaling is set to 100% (recommended), the issue does not occur.
I have attached a YouTube video demonstrating the problem.
Thank you.
Steps to reproduce
1-Set display scaling (zoom) to 125%.
2-Take a screenshot near the bottom-right edge of the screen.
3-Pin the screenshot.
4-The pinned screenshot ends up outside the usable area of the monitor.
Screenshots or screen recordings
https://www.youtube.com/watch?v=5cJIHe2r_k4
System Information
SO: Windows 11 25H2 build 26200.8457
GPU: RTX 5070 Ti
Monitor: LG 32GP850-B 1440P (Zoom 125%)
Config: I have a single monitor setup connected via DisplayPort at 2560×1440 (1440p) resolution with display scaling set to 125%.