[Bug]: Failed patch "board-helios64-remove-pcie-ep-gpios" on main for NanoPi R3S-LTS #9342
Description
What happened?
🐳|🔨] Summary of failed patches
[🐳|🔨] ╭──────────────────────┬──────────────────────────────────────────┬────────────────────────────────────────────────────────────╮
[🐳|🔨] │ Patch │ Patching output │ Rejects │
[🐳|🔨] ├──────────────────────┼──────────────────────────────────────────┼────────────────────────────────────────────────────────────┤
[🐳|🔨] │ board-helios64-remov │ patching file │ --- arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts │
[🐳|🔨] │ e-pcie-ep-gpios │ "arch/arm64/boot/dts/rockchip/rk3399-kob │ +++ arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts │
[🐳|🔨] │ │ ol-helios64.dts" │ @@ -800,7 +800,6 @@ &pcie_phy { │
[🐳|🔨] │ │ Hunk #1 FAILED at 800. │ }; │
[🐳|🔨] │ │ 1 out of 1 hunk FAILED -- saving rejects │ │
[🐳|🔨] │ │ to file "/tmp/tmpskfl4odm" │ &pcie0 { │
[🐳|🔨] │ │ │ - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; │
[🐳|🔨] │ │ │ max-link-speed = <2>; │
[🐳|🔨] │ │ │ num-lanes = <2>; │
[🐳|🔨] │ │ │ pinctrl-names = "default"; │
[🐳|🔨] │ │ │ │
[🐳|🔨] ╰──────────────────────┴──────────────────────────────────────────┴────────────────────────────────────────────────────────────╯
[🐳|🔨] Traceback (most recent call last):
[🐳|🔨] File "/armbian/lib/tools/patching.py", line 491, in <module>
[🐳|🔨] raise exit_with_exception
[🐳|🔨] Exception: Failed to apply 1 patches.
[🐳|💥] Error 1 occurred in main shell [ at /armbian/lib/functions/logging/runners.sh:223
run_host_command_logged_raw() --> lib/functions/logging/runners.sh:223
run_host_command_logged() --> lib/functions/logging/runners.sh:205
kernel_main_patching_python() --> lib/functions/compilation/kernel-patching.sh:64
do_with_hooks() --> lib/functions/general/extensions.sh:617
do_with_logging() --> lib/functions/logging/section-logging.sh:81
kernel_main_patching() --> lib/functions/compilation/kernel-patching.sh:79
compile_kernel() --> lib/functions/compilation/kernel.sh:54
artifact_kernel_build_from_sources() --> lib/functions/artifacts/artifact-kernel.sh:242
artifact_build_from_sources() --> lib/functions/artifacts/artifacts-obtain.sh:34
obtain_complete_artifact() --> lib/functions/artifacts/artifacts-obtain.sh:280
build_artifact_for_image() --> lib/functions/artifacts/artifacts-obtain.sh:392
main_default_build_packages() --> lib/functions/main/build-packages.sh:102
full_build_packages_rootfs_and_image() --> lib/functions/main/default-build.sh:31
do_with_default_build() --> lib/functions/main/default-build.sh:42
cli_standard_build_run() --> lib/functions/cli/cli-build.sh:25
armbian_cli_run_command() --> lib/functions/cli/utils-cli.sh:136
cli_entrypoint() --> lib/functions/cli/entrypoint.sh:208
main() --> compile.sh:50
]
[🐳|💥] Cleaning up [ please wait for cleanups to finish ]
How to reproduce?
When running the following compile command, the build fails
./compile.sh build BOARD=nanopi-r3s-lts BRANCH=current BUILD_MINIMAL=yes KERNEL_CONFIGURE=no RELEASE=trixie ROOTFS_TYPE=btrfs SHARE_LOG=yes
I ran this off of the current main branch 95a7ba43bc5fa4de91bd2d75f0296b5618c5cb9c
Branch
main (main development branch)
On which host OS are you running the build script and observing this problem?
Debian 13 Trixie
Are you building on Windows WSL2?
- Yes, my Ubuntu/Debian/OtherOS is running on WSL2
Relevant log URL
https://paste.armbian.com/raniconodu
Code of Conduct
- I agree to follow this project's Code of Conduct