ZR2.6 WobbleRing SFU1204 LowerDisc V1 - does not fit all ball screw nuts which exist in 24mm too

[finalstage]

The inner diameter of the LowerDisc where the ball screw should fit in is 22mm. But ball screw nuts with a 24mm diameter are also very common.
There is not much room but maybe the design could be adapted, at least in a second version to fit the 24mm ball screw nuts. So not all of the ppl affected need to figure this out, adept the design and print it again :-D
Who comes around this, here is a version with an inner diameter of 24.5mm: https://drive.google.com/file/d/1R7lG31QwiJN3g-fD6eqDFybKqCpFvIof/view?usp=sharing

Best,
Manuel

[MirageC79]

Thanks for the feedback. I have added a note to the ZR2, ZR2.5 and ZR2.6 BOMs for the need of a 22mm diameter nut. I will see if I can revise the design at a later time. I am leaving this item as a reminder to myself.