Bug while loading CISCO-OSPF-MIB in YANG SUITE

[dundient]

Good day,

When I try to load OSPF-MIB, OSPF-TRAP-MIB, CISCO-OSPF-MIB, CISCO-OSPF-TRAP-MIB modules, there is no response from the device. All other modules work properly except MIB modules. SNMP also works properly.
I use ESR6300 IOS-XE 17.12.4 with YANG module 17.12.4 form the github repository.

Cisco says that it might be a bug.

https://community.cisco.com/t5/general-networking/yangsuite-netconf/m-p/5199293#M299

What are other solutions might be there for loading and gathering CISCO-OSPF-MIB information in YANG SUITE?
Thank you in advance.

[jeremycohoe]

Did you try increase the timeout ? Default 30 seconds you can change it in the “edit device” settings. Jeremy Jeremy

…

________________________________ From: dundient ***@***.***> Sent: Thursday, September 26, 2024 5:19:18 PM To: CiscoDevNet/yangsuite ***@***.***> Cc: Subscribed ***@***.***> Subject: [CiscoDevNet/yangsuite] Bug while loading CISCO-OSPF-MIB in YANG SUITE (Issue #121) Good day, When I try to load OSPF-MIB, OSPF-TRAP-MIB, CISCO-OSPF-MIB, CISCO-OSPF-TRAP-MIB modules, there is no response from the device. All other modules work properly except MIB modules. SNMP also works properly. I use ESR6300 IOS-XE 17.12.4 with YANG module 17.12.4 form the github repository. Cisco says that it might be a bug. https://community.cisco.com/t5/general-networking/yangsuite-netconf/m-p/5199293#M299 What are other solutions might be there for loading and gathering CISCO-OSPF-MIB information on YANG SUITE? Thank you in advance. — Reply to this email directly, view it on GitHub<#121>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AHEDZOL4IO7WTQKOTWALICTZYSQANAVCNFSM6AAAAABO6C2EN2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGU2TCNZUHA2DSNA>. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[dundient]

@jeremycohoe Yes, I've increased the timeout up to 1 hour and there is no response from the device.

[dundient]

@jeremycohoe Yes, I've increased the timeout up to 1 hour and there is no response from the device.

I've received the ERROR message

[jeremycohoe]

Please work with the TAC for resolution of individual data model xpaths