Skip to content

Setup_Legacy_Wahoo_KICKR.md

Latest commit

 

History

History
50 lines (43 loc) · 3.51 KB

Setup_Legacy_Wahoo_KICKR.md

File metadata and controls

50 lines (43 loc) · 3.51 KB
Raw

Legacy Wahoo KICKR

Today Bluetooth Smart FTMS is the absolute industry standard for indoor trainers and Simcline-V2 is primarily targeted at FTMS! However Simcline-V2 has builtin support for Legacy Wahoo KICKR trainers to meet the needs of early adapters of SIMCLINE!
Pre-2020 Wahoo trainers use Cycling Power Service as a trainer control. Wahoo has added a custom characteristic: A026E005-0A7D-4AB3-97FA-F1500F9FEB8B to CPS to handle the Control Point characteristic. This functionality is builtin with Simcline-V2, you only have to activate it when using a legacy KICKR trainer! Notice that FTMS and Wahoo CPS mutually exclude each other within Simcline-V2!

configNimBLE.h

Make configNimBLE.h settings to comply with your Legacy Wahoo KICKR trainer.

  • Open file, edit and save(!): /documents/arduino/libraries/Simcline-V2/src/config/configNimBLE.h

  • Set Simcline-V2 NimBLE configuration for use of Legacy Wahoo KICKR:

// ----------------------------------------------------------------------------------------
// Uncomment to allow/enable the MITM transfer of FiTness Machine Service data from trainer 
// to training App directly. Bluetooth Smart FTMS: This is the industry standard for apps 
// controlling the trainer via Bluetooth Smart, and includes power and cadence baked in.
//		  NOTICE --> NOT all (legacy) trainers support FTMS!!!
//#define ENABLE_FTMS

// ----------------------------------------------------------------------------------------
// Uncomment to allow/enable the MITM transfer of Zwift Virtual Shifting (ZVS) data between 
// trainer and training App. ZVS is a proprietary Zwift BLE service used for virtual gear 
// shifting and trainer control instead of physically moving your chain across cogs.
//		  NOTICE --> Requires a trainer with firmware that explicitly supports ZVS!
//#define ENABLE_ZVS
#if (defined(ENABLE_ZVS))
// Uncomment to allow/enable the Legacy ZVS Service for your trainer
//#define TRAINER_WITH_LEGACY_ZVS_SERVICE
#endif

// ----------------------------------------------------------------------------------------
// Uncomment to allow/enable the MITM transfer of Cycling Speed and Cadence data from trainer 
// to training App directly. Useful when trainer allows direct pairing of builtin CSC sensor, 
//		  NOTICE --> NOT all (legacy) trainers support CSC!!!
#define ENABLE_CSC

// ----------------------------------------------------------------------------------------
// Uncomment to allow/enable the MITM transfer of Heart Rate Measurement data from trainer 
// to training App directly. Useful when trainer allows direct pairing of your HRM band, 
//		  NOTICE --> ONLY Zwift Hub and Jetblack trainers support HRM baked in!!!
//#define ENABLE_HRM

// ----------------------------------------------------------------------------------------
// Uncomment to allow/enable the MITM transfer of Wahoo Trainer Control data from trainer 
// to training App directly. 
// Bluetooth Smart Wahoo Trainer Control: This is Wahoo’s (legacy) proprietary method of 
// controlling trainers, and includes speed/cadence data – still supported by Zwift.
//		  NOTICE --> Most pre-2020 Wahoo trainers support this instead of FTMS!!!
#define ENABLE_WAHOOCPS

Warning: When a new version of Simcline-V2 is installed in Arduino IDE 2 it will override ALL files of a previous version! If you have made modifications in a file that is part of Simcline-V2 --> Make a copy of the file(s) in question BEFORE you install a new library version!