This project is the user interface for the coffee roaster that I built. You can see the build log details at http://anthonydipilato.com/2017/04/17/coffee-roaster-ui-with-javafx/
The UI runs on a Raspberry Pi connected to an arduino via USB The arduino acts as slave to the Raspberry Pi
USE AT YOUR OWN RISK
I am posting this project for educational use only.
This project involves, electricity, moving parts, propane, and fire.
I will not be held liable for damages and/or injuries resulting from the use of this code
or from reproducing this project.
Command Formatting
[Command],[Address][NEWLINE]
Commands
| Code | Item |
|---|---|
| 0 | Status |
| 1 | Relay on |
| 2 | Relay off |
| 3 | Set proportional valve |
Addresses
| Address | Item |
|---|---|
| 0 | All |
| 1 | Drum Temperature |
| 2 | Chamber Temperature |
| 3 | Exhaust Temperature |
| 4 | Flame Status |
| 5 | Drum Relay |
| 6 | Cooling Relay |
| 7 | Exhaust Relay |
| 8 | Gas Relay |
| 9 | Ignitor |
| 10 | Proportional Valve |
- Medusa - JavaFX library for animated gauges
- jSSC 2.7.0 - Java Simple Serial Connector, serial-port communication library.
- Colors 1.4 - Color definitions for Medusa
Anthony DiPilato, Anthony@bumbol.com
All code is available under the MIT license. See LICENSE file for info.